• 환경정책연구
• /
• 제5권2호
• /
• pp.49-67
• /
• 2006

선진 외국에서 먹는물 중 방사성물질의 관리동향에 대한 고찰은 다음과 같다. 미국은 1974년 안전한 음용수법에 규제안을 설정한 후, 30년 이상 개정하여 현재 우라늄 MCL은 $30{\mu}g/L$, 라돈 AMCL 4,000pCi/L 또는 MCL 300pCi/L, 라듐-226과 라듐-228의 합 5pCi/L로 설정하여 관리하고 있다. 캐나다는 우라늄을 $20{\mu}g/L$로 잠정적으로 설정하였다. WHO는 2004년 9월 우라늄과 라돈의 가이드라인을 각각 $15{\mu}g/L$과 100Bq/L로 개정 하였다. 선진 외국은 먹는물 중 방사성물질에 대하여 수십년간 연구조사결과를 토대로 수질기준을 정하였고, 지속적으로 개선 및 보완을 하여 관리하고 있음을 알 수 있었다.

• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.1-9
• /
• 2015

하천제방 건전도 평가는 하천설계기준 해설(KWRA, 2009) 및 구조물기초 설계기준과 그 해설서(MLTM, 2014와 KGS, 2009) 등 관련 기준 및 기준 해설서에 따라 수위조건 별 기초지반 및 제체를 통한 파이핑 안전성과 제내지 및 제외지 비탈면의 활동안전성 평가를 통해 수행된다. 이때 수위파형은 하천제방 건전도 평가 시 가장 중요한 수위조건 입력자료이나, 국가기준에서 합리적인 결정방법을 제시하지 못하고 있는 실정이다. 본 논문에서는 합리적인 수위파형 결정방법 제안을 위하여 평수위 상승, 홍수위 지속, 수위강하, 홍수빈도 등 수위파형 구성인자 변화에 따른 배수통문 설치 제방의 건전도 평가를 수행하였다. 평가결과, 문산배수통문 설치 제방의 설계수위파형은 최대 57 시간 이상의 평수위상승시간 및 53 시간 이상의 홍수위지속시간 등을 반영하여 설정하여야 할 것으로 평가되었다.

• 한국농공학회논문집
• /
• 제63권4호
• /
• pp.97-104
• /
• 2021

Despite the practical limitations of calculating the amount of inflow and supply related to the operation of agricultural reservoirs, the role of agricultural reservoirs is gradually being emphasized. In particular, as interest in disaster safety has increased, the demand for preliminary measures to prepare for disasters has been rising, for instance, pre-discharging agricultural reservoirs for flood control. The aim of this study is to analyze the plans for the flood season reservoir operation considering pre-discharge period and water level limit. Accordingly, we optimized the simulation of daily storage using the ratio correction factor (RCFs) and analyzed the amount of inflow and supply using K-HAS. In addition we developed the drought determination coefficient (k) as a indicator of water availability and applied it for supplementing the risk level criteria in the Drought Crisis Response Manual. The results showed that it would be difficult to set the water level limit during the flood period in the situation of little water supply for flood control in agricultural reservoirs. Therefore, it is necessary to operate the reservoir management regulations after measures such as securing additional storage water are established in the future.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.157-162
• /
• 2013

To deal with the water pollution arising from the construction site, this study raises the issues of management and laws and it suggest the efficient way to reduce water pollution by through the case studies. In order to study, seven cases were selected from "Construction Environmental Management Best Practice Competition" co - sponsored by Construction Association of Korea and Construction Environment Association. As a study result, there are problems that depending on the characteristic of the construction site environment simple alone settling facilities can not handle muddy and dirty water generated by the construction site. However, when the construction site applied improved water pollution control facilities with reflecting the characteristic of muddy and dirty water. The problem can be solved moreover it can achieve exceeded emission standard. Therefore new regulations and management with water pollution control facilities considering characteristic of environment is needed to cope with water pollution arising from the construction site.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.557-565
• /
• 2010

Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.460-472
• /
• 2023

This study was conducted based on the case of an accident (excessive deformation) that occurred during the hydraulic test of a shipboard tank manufactured in accordance with the design regulations. Over-pressure phenomenon was noted as the main cause of accidents in the process of testing tanks without physical damage, which can be found in external factors such as cross-sectional difference between inlet pipe and air pipe and higher water filling rate than the recommended one. The main goal of this paper is to establish a safe water filling rate according to the range of sectional area ratio(SAR) reduced below the regulations for each test situation. The simulation was conducted in accordance with the hydraulic test procedure specified in the Ship Safety Act, and the main situation was divided into two types: filling the tank with water and increasing the water head to the test pressure. The structural safety evaluation of the pressure generated inside the tank and the effect on the structure during the test was reviewed according to the SAR range. Based on the results, guidelines for the optimal filling rate applicable according to SAR during the hydraulic test were presented for the shipboard tanks used in this study.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 제5회 하계 Workshop (97 한,카 국제공동 Workshop, 고도 수처리를 위한 막분리 공정)
• /
• pp.21-35
• /
• 1997

As environmental regulations become more stringent, water, used either as drinking water or as industrial process water, becomes increasingly better in its quality. As a result, an increasingly more advanced water treatment technology is required. It is believed that membrane technology will be able to satisfy such a requirement. The heart of the membrane technology is membrane. The advancement in water treatment technology using membranes, therefore, depends on the development of novel membranes which are superior in performance to the currently available membranes. In this paper, a brief review will be made how the recent progress in surface science, such as surface modification and surface characterization, has aided to improve the performance of the membranes used for water treatment. Some suggestions will also be made regarding the future direction of the research in this area.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.126-127
• /
• 2005

This paper provides information on the current issues and the progress of on-going researches relating onboard fixed fire extinguishing system in the IMO Sub-committee on Fire Protection. And also prepares to introduce the recent amendment to regulations and technical trends of the water mist fire extinguishing system and high expansion foam system.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.375-378
• /
• 2001

At the time of facing strict environmental regulations, environmentally friendly dyeing technology is being highlighted due to the potential possibility of reducing environmental impact, so is the preparation process that uses a great deal of water and generates as much contamination. Enzyme technology has been regarded as an eco-friendly solution to industrial problems, saving water, chemicals and energy. (omitted)

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.151-155
• /
• 1996

When considering marine pollution control procedures there are three general areas which demand close attention. These are: $\bullet$ oily bilge water $\bullet$ refuse $\bullet$ sewage All of these applications can be handled constantly changing to address the complexity of the waste management issues. The basic marine pollution regulations are covered by the International Maritime Organizations MARPOL 73/78 convention, with the various annexes and revisions. Of particular importance for equipment to deal with oily-water, sewage and plastic wastes.