• 한국수소및신에너지학회논문집
• /
• 제35권3호
• /
• pp.257-268
• /
• 2024

Hydrogen serves as a clean energy source with potential applications across various sectors including electricity, transportation, and industry. In terms of policy and economic support, governmental policy backing and economic incentives are poised to accelerate the commercialization and expansion of hydrogen energy technologies. Hydrogen energy is set to become a cornerstone for a sustainable future energy system. Additionally, when constructing hydrogen production plants, economic aspects must be considered. The essence of hydrogen production plants lies in the electrolysis of water, a process that separates water into hydrogen and oxygen using electrical energy. The initial capital expenditure (CAPEX) for hydrogen production plants can vary depending on the electrolysis technology employed. This study aims to provide a comprehensive understanding of hydrogen production technologies as well as to propose a method for predicting the CAPEX of hydrogen production plants.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.132-140
• /
• 2023

In this study, rotary magnet holder (RMH) was manufactured to analyze the ion transport effect according to the rotating magnetic field for the hydrogen production efficiency by alkaline water electrolyte. In the experiment, the voltage signal according to the magnet arrangement inside the RMH, the rotation speed, and the rotation time was measured using the voltage measurement module. As a result of the voltage signal measurement experiment, the average potential difference increased as the rotation speed of the RMH increased. Through the results of the voltage signal measurement experiment, the most efficient magnet arrangement (case 2) was applied to the RMH to conduct a water electrolysis experiment. A 20% NaOH aqueous solution was filled in the electrolytic cell, and a direct current 2 V constant voltage was applied to measure the current value according to the RMH rotation to compare the hydrogen generation amount. When rotating at 100 RPM, the hydrogen production efficiency increased by 8.06% compared to when not rotating. Considering the area exceeding +25 mA, which was not measured at the beginning of the experiment, an increase in hydrogen production of about 10% or more can be expected.

• 한국환경과학회지
• /
• 제17권1호
• /
• pp.37-44
• /
• 2008

The electro-chemical decolorization of Rhodamine B (RhB) in water has been carried out by electro Fenton-like process. The effect of distance, material and shape of electrode, NaCl concentration, current, electric power, $H_2O_2$ and pH have been studied. The results obtained that decrease of RhB concentration of Fe(+)-Fe(-) electrode system was higher than that of other electrode system. The decrease of RhB concentration was not affected electrode distance and shape. Decolorization of electro Fenton-like reaction, which was added $H_2O_2$ onto the electrolysis using electrode was higher than electrolysis. Addition of NaCl decreased the electric consumption. The lower pH is, the faster initial reaction rate and reaction termination time observed.

• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.22-28
• /
• 2019

To maximize the oxygen evolution reaction (OER) in the electrolysis of water, nano-grade $IrO_2$ powder with a low specific surface was prepared as a catalyst for a solid polymer electrolyte (SPE) system, and a membrane electrode assembly (MEA) was prepared with a catalyst loading as low as $2mg\;cm^{-2}$ or less. The $IrO_2$ catalyst was composed of heterogeneous particles with particle sizes ranging from 20 to 70 nm, having a specific surface area of $3.8m^2g^{-1}$. The anode catalyst layer of about $5{\mu}m$ thickness was coated on the membrane (Nafion 117) for the MEA by the decal method. Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) confirmed strong adhesion at the interface between the membrane and the catalyst electrode. Although the loading of the $IrO_2$ catalyst was as low as $1.1-1.7mg\;cm^{-2}$, the SPE cell delivered a voltage of 1.88-1.93 V at a current density of $1A\;cm^{-2}$ and operating temperature of $80^{\circ}C$. That is, it was observed that the over-potential of the cell for the oxygen evolution reaction (OER) decreased with increasing $IrO_2$ catalyst loading. The electrochemical stability of the MEA was investigated in the electrolysis of water at a current density of $1A\;cm^{-2}$ for a short time. A voltage of ~2.0 V was maintained without any remarkable deterioration of the MEA characteristics.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.491-496
• /
• 2017

The hydrogen($H_2$) is promising energy carrier of renewable energy in the microgrid system such as small village and military base due to its high energy density, pure emission and convenient transportation. $H_2$ can be generated by photocatalytic water splitting, gasification of biomass and water electrolysis driven by solar cell or wind turbine. Solid oxide electrolysis cells(SOECs) are the most efficient way to mass production due to high operating temperature improving the electrode kinetics and reducing the electrolyte resistance. The SOECs are consist of nickel-yttria stabilized zirconia(NiO-YSZ) fuel electrode / YSZ electrolyte / lanthanum strontium manganite-YSZ(LSM-YSZ) air electrode due to similarity to Solid Oxide Fuel Cells(SOFCs). The Ni-YSZ most widely used fuel electrode shows several problems at SOEC mode such as degradation of the fuel electrode because of Ni particle's redox reaction and agglomeration. Therefore Ni-YSZ need to be replaced to an alternative fuel electrode material. In this study, We studied on the Double perovskite $PrBrMnO_{5+{\delta}}$(PBMO) due to its high electric conductivity, catalytic activity and electrochemical stability. PBMO was impregnated into the scaffold electrolyte $La_{0.8}Sr_{0.2}Ga_{0.85}Mg_{0.15}O_{3-{\delta}}$(LSGM) to be synthesized at low temperature for avoiding secondary phase generated when it exposed to high temperature. The Half cell test was conducted at SOECs and SOFCs modes.

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.23-31
• /
• 2004

For the fabrication of high efficient bifunctional electrocatalyst of oxygen electrode for PEM URFC (Polymer Electrolyte Membrane Unitized Regenerative Fuel Cell), which is a promising energy storage and conversion system using hydrogen as the energy medium, several bifunctional electrocatalysts were prepared and tested in a single cell URFC system. The catalysts for oxygen electrode revealed fuel cell performance in the order of Pt black > PtIr > PtRuOx > PtRu ~ PtRuIr > PtIrOx, whereas water electrolysis performance in the order of PtIr ~ PtIrOx > PtRu > PtRuIr > PtRuOx ~ Pt black. Considering both reaction modes PtIr was the most effective elctrocatalyst for oxygen electrode of present PEM URFC system. In addition, the water electrolysis performance was significantly improved when Ir or IrOx was added to Pt black just 1 wt.% without the decrease of fuel cell performance. Based on the catalyst screening and the optimization of catalyst composition and loading, the optimum catalyst electrodes for PEM URFC were $1.0mg/cm^2$ of Pt black as hydrogen electrode and $2.0mg/cm^2$ of PtIr (99:1) as oxygen electrode.

• 환경위생공학
• /
• 제15권2호
• /
• pp.41-48
• /
• 2000

In this study, we have investigated the effect of the various operating conditions on the removal fluorine in the rinsed water for the semiconductor industry by using electrolysis process. The removal efficiency of fluorine was irrelevant to initial pH, and carbon anode was high-level treatment in the effect of various electrodes. Fluorine included in the wastewater is treated by the addition of a Ca(OH)2, removal efficiency of electrolysis was increased about 40%. Besides the removal efficiency of fluorine was increased as the current density was increased and this treatment system could reduce both the total sludge and running costs. The feasibility of the electrochemical treatment to the fluorine containing wastewater was verified from this study.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.570-571
• /
• 2010

To reduce the problem of ecocide, the plating equipment, water treatment system, electrolysis facility in ship need high current high power rectifier. This paper shows entire constitution of the proposed high-current rectifier for electrolysis of seawater, describes a way to design controller and analyzes output characteristic of the rectifier.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.431-438
• /
• 2021

본 연구는 향후 보다 강화될 것으로 예측되어지는 USCG Phase II 형식승인시험을 대비하기 위해 SYBR Green I과 SYBR Gold의 염색 효율을 비교한 후 염색 효율이 높은 시약을 실제 선박평형수처리장치(electrolysis type, UV + electrolysis type)를 통과한 처리수에 적용해서 보았다. 시료의 부피가 0.5 mL ~ 2 mL, 염색 시약(Stock solution)을 100배 및 200배 희석한 조건에서 염색된 바이러스가 가장 선명하게 관찰되었다. SYBR Green I과 SYBR Gold의 염색효율은 장목한 해수조건의 실험구에서 유의한 차이를 보이지 않았지만, SYBR Gold의 노란색에 비해 SYBR Green I으로 염색된 시료에서 발현하는 녹색 형광이 보다 선명해서 관찰이 용이한 것으로 확인되었다. 선박평형수처리장치(electrolysis type, UV + electrolysis type)를 통과하지 않은 실험수 및 대조수에서의 해양 바이러스 현존량은 약 109~1010 VLP 100 mL-1 으로 확인된 반면, 처리수에서는 살아 있는 바이러스가 관찰되지 않았다. 실험수 결과를 보면, SYBR Green I은 해수, 기수, 담수 조건에서 효과적으로 염색이 되는 것으로 확인되었다. 다양한 선박평형수처리기술에 따른 추가적인 검증 및 염색 방법 개발이 필요하지만, SYBR Green I 염색법은 USCG Phase II 미국형식승인시험 바이러스 생산판별에 좋은 대안이 될 수 있을 것으로 판단된다.

• 멤브레인
• /
• 제32권5호
• /
• pp.283-291
• /
• 2022

재생에너지의 보급과 기후변화를 대응하기 위한 해결책으로 수소에너지에 대한 관심이 늘어나고 있다. 수소는 미이용 전력을 대용량 장주기로 저장하기에 가장 적합한 수단이며 이러한 수소를 생산하는 기술 중 수전해는 물에 전기에너지를 인가하여 수소를 생산하는 친환경적 수소생산 기술로 알려져 있다. 수전해의 구성 요소 중 분리막은 음극과 양극을 물리적으로 분리할 뿐만 아니라 생성되는 수소와 산소의 섞임 현상을 방지하며 이온의 전달을 가능하게 하는 복합적인 역할을 수행한다. 특히 기존의 수전해 기술들의 단점을 보완할 수 있는 차세대 음이온 교환막 수전해에서의 핵심은 우수한 음이온 교환막을 확보하는 것이다. 높은 이온 전도성과 알칼리 환경에서 우수한 내구성을 동시에 가지려는 많은 연구들이 진행되고 있으며 다양한 소재에 대한 탐색이 이루어지고 있다. 본 총설에서는 상용 블록 공중합체인 Polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS)를 기반으로 하는 음이온 교환막에 대한 연구에 대해 살펴보며 최신 연구 동향과 앞으로 나아가야할 점에 대해 논하고자 한다.