• 한국환경보건학회지
• /
• 제34권3호
• /
• pp.219-225
• /
• 2008

Many building materials may contain high concentrations of volatile organic compounds (VOCs) and other hazardous pollutants(HAPs). Specifically, VOCs discharged by indoor building material may cause "new house" syndrome, atopic dermatitis etc. The diffusion coefficient and initially contained total VOC quantity were determined using microbalance experiments and small chamber tests. Interactions between volatile organic compounds (VOCs) and vinyl flooring (VF), a relatively homogenous, diffusion-controlled building material, were characterized. Rapid determination of the material/air partition coefficient (K) and the material-phase diffusion coefficient (D) for each VOC was achieved by placing thin VF slabs in a dynamic microbalance and subjecting them to controlled sorption/desorption cycles. K and D are shown to be independent of concentration for all of the VOCs and water vapor. This approach can be applied to other diffusion-controlled materials and should facilitate the prediction of their source/sink behavior using physically-based models.

• Archives of Pharmacal Research
• /
• 제10권2호
• /
• pp.88-93
• /
• 1987

Chitosan ($\beta$-D-glucosaminan) is chemically prepared from chitin (N-acetyl-$\beta$- D-glucosaminan) which is an unutilized natural resource. We now report on the suitability of the chitosan matrix for use as vehicles for the controlled release of drugs. Salicylic acid and aspirin were used as model drugs in this study. The permeation of salicylic acid in the chitosan membranes was determined in a glass diffusion cell with two compartments of equal volume. Drug release studies on the devices were conducted in a beaker containing 5% sodium hydroxide solution. Partition coefficient (Kd) value for acetate membrane (472) is much greater than that for fluoro-perchlorate chitosan membrane (282). Higher Kd value for acetate chitosan membrane appears to be inconsisstent with the bulk salicylic acid concentration. The permeability constants of fluoro-perchlorate and acetate chisotan membranes for salicylic acid were 3.139 ${\times}10^{-7}cm^2$ min up to 60 min and that of 30% aspirin in the devices was 4.739${\times}10^{-7}cm^2$sec upto 60 min. As the loading dose of aspirin in a chitosan device increased, water up-take of chitosan device increased, but in case of salicylic acid it decreased. The release rate increased with increase in the molecular volume of the drugs. Thses result suggest that the release mechanism may be controlled mainly by diffusion through pores.

• Advances in environmental research
• /
• 제4권3호
• /
• pp.183-196
• /
• 2015

Migration of leachate generated through embankment of construction waste soil (CWS) in low-lying areas was studied through physical and chemical analysis. A leachate solution containing soluble cations from CWS was found to have a pH above 9.0. To determine the distribution coefficients in the alkali solution, column and migration tests were conducted in the laboratory. The physical and chemical properties of CWS satisfied environmental soil criteria; however, the pH was high. The effective diffusion coefficients for CWS ions fell within the range of $0.725-3.3{\times}10^{-6}cm^2/s$. Properties of pore water and the amount of undissolved gas in pore water influenced advection-diffusion behavior. Contaminants migrating from CWS exhibited time-dependent concentration profiles and an advective component of transport. Thus, the transport equations for CWS contaminant concentrations satisfied the differential equations in accordance with Fick's 2nd law. Therefore, the migration of the contaminant plume when the landfilling CWS reaches water table can be predicted based on pH using the effective diffusion coefficient determined in a laboratory test.

• International Journal of Concrete Structures and Materials
• /
• 제4권2호
• /
• pp.109-112
• /
• 2010

Part I of this study was devoted to the electrical accelerated chloride diffusion in mortars. In this second part, natural chloride diffusion has been investigated for four types of mortars under exposure to a 0.5 mol/L NaCl solution for a period of up to 35 days. Two different types of sand were used for the production of test samples: siliceous sand (used as a reference) and limestone sand (used in this study). The effect of water to cement ratio and exposure time on the diffusion coefficients of mortars was also investigated. In this study, the total and free chloride content and penetration depth of mortar were measured after immersion, and Fick's second law of diffusion was fitted to the experimental data to determine the diffusion coefficient. Their results show that the use of crushed limestone sand in mortar had a positive effect on the chloride resistance. The apparent diffusion coefficient in all specimens was smaller than that in siliceous sand mortar. However, the chloride penetration of these mortars was increased as exposure time progressed.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.735-742
• /
• 2005

본 연구에서는 시멘트의 종류에 따른 콘크리트의 내해수성을 평가하기 위하여 실험을 통해 총 5종류의 시멘트를 사용한 콘크리트의 강도, 공극률 및 염화물 확산 특성을 평가하고, 이들의 상관관계를 분석하였다. 실험 결과, 장기재령에서 V종 시멘트를 사용한 콘크리트의 압축강도 및 공극률은 I종 시멘트를 사용한 콘크리트와 비슷하게 나타났으나 염화물 확산계수는 크게 나타났다. 그리고 I종 시멘트의 일부를 플라이애쉬로 치환해 사용한 콘크리트의 압축강도, 공극률 및 염화물침투 저항성은 재령 경과와 함께 I종 시멘트를 사용한 경우에 비하여 우수한 것으로 나타났다. 한편, 콘크리트의 압축강도 및 공극률과 염화물 확산계수는 시멘트의 종류에 관계없이 높은 상관계수 및 결정계수를 나타내어 높은 상관성을 가지고 있음이 확인되었다.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.245-251
• /
• 2018

최근 구조물의 유지관리의 중요성이 부각되면서 자기치유 콘크리트 기술 분야의 연구가 활발히 이루어지고 있다. 이에 반해서 자기치유 성능을 평가하기 위한 척도는 부족한 실정이다. 균열폭을 측정하기 위한 방법으로 시각적인 방법이 1차적으로 사용되고 있으나 시편 내부의 균열폭을 관찰하기가 어려우며, 비균질한 균열특성으로 인해 표면에 대한 국부적인 측정만 할 수 있는 단점이 있다. 균열에 대한 간접적인 평가 방법으로 투수실험이 널리 활용되고 있지만 물의 점성으로 인한 문제가 있으며, 또한 실험 중 시편내부 물질의 용출될 가능성이 존재한다. 본 연구에서는 기체확산 특성을 활용한 균열폭 평가 방법을 제안하고자 하였다. 아크릴로 이상화된 직선균열을 제작하여 균열폭, 두께에 따른 시편의 확산계수를 분석하였다. 실험결과를 통하여 균열폭과 확산계수는 선형관계에 있음을 보였고, 두께와 확산계수는 역수의 관계에 있음을 증명하였다.

• Journal of Ginseng Research
• /
• 제9권2호
• /
• pp.248-255
• /
• 1985

In order to investigate the optimal drying condition of white ginseng by using bulk air drier(130 x 62 x 65cm), drying curves, diffusion coefficient at various drying temperature, the energy of activation, variation of color intensity and chemical components during drying of white ginseng were studied. Fick's second low of diffusion for diffusion out of spheres was successfully applied to describe the drying of white ginseng. It was found that the diffusion coefficient of water was 2.2x107, 9.0x107 cm2/sec at drying temperature 4$0^{\circ}C$, 55$^{\circ}C$, respectively. An Arrhenius type temperature dependency of moisture diffusivity was found, the energy of activation being 18.8 Kcal/g mol. Color intensity of white ginseng dried at various drying temperature was increased with an increase in drying temperature. The contents of crude protein, reducing sugar and crude saponin during drying of white ginseng were gradually decreased as increasing of drying time. And with the sensory evaluation by multiple comparison difference analysis, the optimal drying temperature of white ginseng was between 45$^{\circ}C$ and 5$0^{\circ}C$.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.282-288
• /
• 1987

Diffusion of Cl- ion in hardened cement paste with slag and siliceous powder such as silica fume and white carbon was investigated. The addition of admixtures reduces the content of Ca(OH)2, which is the main cause of pore formation by corrosive action of sea-water. The addition of admixtures makes the hardened cement paste dense, thereby restricting the diffusion of Cl- ion and improving the resistance to sea-water. Apparence diffusion coefficient of Cl- ion in hardened ordinary portland cement paste was 3.7${\times}$10-8$\textrm{cm}^2$/sec, while that for the hardened cement paste with the admixture was 1.2∼3.2${\times}$10-8$\textrm{cm}^2$/sec.

• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.433-442
• /
• 2010

콘크리트의 염화물 확산계수의 제어는 염해에 노출된 콘크리트 구조물의 내구수명 확보에 필수적이며, 이를 위해 많은 연구가 진행되어 왔다. 본 연구는 목표 내구수명을 만족하는 목표확산계수를 도출하고 유전자 알고리즘을 통하여, 최적배합을 도출하는데 있다. 이를 위하여, 동일한 골재 및 혼화재를 사용한 30개의 배합과 그에 따른 염화물 확산계수를 분석하였으며, 27개를 대상으로 확산계수 예측식을 도출하였다. 확산계수 예측식의 변수로는 물-결합재비, 단위 혼화재량(슬래그, 플라이 애쉬, 실리카퓸), 단위 시멘트량, 단위 잔골재 및 굵은 골재량을 포함하도록 하였으며 나머지 3개의 배합에 대하여 검증을 수행하였다. 최적 함수식은 27개의 배합에 대하여 평균 18.7%의 오차와 16.0%의 변동계수를 보이고 있었다. 주어진 3개의 확산계수에 대하여, 유전자 알고리즘을 통하여 도출된 배합은 0.3%~12.2%의 오차범위를 가지며 각각의 배합인자를 도출하였다. 최종적으로 서로 다른 내구성 설계변수(목표내구수명, 피복두께, 표면염화물량, 혼화재량)와 노출환경(온도 및 습도)을 가정하여 목표 확산계수를 도출하였으며, 이에 만족하는 최적화된 콘크리트 배합을 제안하였다. 본 연구에서는 유전자 알고리즘을 이용하여, 내구성 콘크리트 배합도출에 대한 적용성을 평가하였으며, 제안된 기법은 다양한 확산계수의 범위를 가지는 광범위한 자료구축을 통하여 개선될 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.573-576
• /
• 2006

To predict service life of concrete structures exposed to chloride attack, surface chloride concentration, diffusion coefficient of chloride ion, and chloride corrosion threshold value in concrete, are used as important factors. of these, as the diffusion coefficient of chloride ion for concrete is strongly influenced by concrete quality and environmental conditions of structures and may significantly change the service life of structures, it is considered as the most important factor for service life prediction. The qualitative factors affecting the penetration and diffusion of chloride ion into concrete are water-binder(W/B) ratio, age, cement type and constituents, chloride ion concentration of given environment, wet and dry conditions, etc. In this paper the influence of cement type on the diffusion characteristics of chloride ion in concrete was investigated through the chloride ion diffusion test. For this purpose, the diffusion characteristics in concrete with cement type such as ordinary portland cement(OPC), binary blended cement(BBC), and ternary blended cement(TBC) were estimated for the concrete with W/B ratios of 32% and 38%, respectively. It was observed from the test that the difussion characteristics of BBC containing OPC and ground granulated blast-furnace slag was found to be most excellent of the cement type used in this study.