• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.550-556
• /
• 2014

In this study, for the control of a single water tank system, a fuzzy-PID controller design technique based on a fuzzy model is investigated. For this purpose, a water tank system is linearized as a number of submodels depending on the operating point, and a fuzzy model is obtained by fuzzy combining. Each submodel is approximated as a first order time delay model, and a PID controller is designed using several existing tuning techniques. Then, through the fuzzy combination of this controller using the same method as that of the fuzzy model, a fuzzy-PID controller is designed. For the proposed technique, a simulation is performed using the fuzzy model of a water tank system, and the validity is examined by comparing its performance with that of a PID controller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.554-562
• /
• 2015

This paper describes an analysis of an architecture and control system of a firefighting cannon manipulator (FCM) composed of two joint axes and one water-shooting actuator. Because the orienting FCM motion is disturbed by the reaction force from water shooting, the water shooting force has been modeled for robust control. The dynamics model of the manipulator has been set up including the external force of water-shooting reaction on the manipulator. A PD Controller and Sliding Mode Controller have been designed and their performance been tested through simulation to track a desired trajectory under the disturbance of a water-shooting reaction. The simulation shows that the performance of the Sliding Mode Controller is better than that of the PD controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.65.2-65
• /
• 2001

There are not only lots of controllers such as UMC(Unit Master Controller), BMC(Boiler Master Controller), Fuel Flow controller, Air flow controller, Feed water flow controller, S/H R/H Temperature controller and so on, but also compensation controller such as BTU compensator, Fuel/Water ratio controller and O2 Co controller to take automatic control in the super critical once through boiler. It is important to make complete automation of boiler to use the compensation controller like BTU compensator. For example, In case of some boiler condition, operator has to change combustion parameter for changing the coal, on the contrary BTU compensator can calculate set value of the fuel flow and reset the fuel flow demand by itself. This paper shows us the logic and instruction regarding compensation controller of boiler that can be operated automatically.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.363-369
• /
• 1999

In this paper, we design the robust $H_{\infty}$ controller for water level control of steam generator using a mixed $H_{\infty}$ optimization with model-matching method. Firstly we choose the desired model which has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant. Simulation results show that proposed robust $H_{\infty}$ controller at specific power operation has satisfactory performances against the variations of load power, steam flow rate, primary circuit coolant temperature, and feedwater temperature. It can be also observed that the proposed robust $H_{\infty}$ controller exhibits better robust stability than conventional PI controller.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1149-1154
• /
• 2017

In this paper, we propose a sensorless multi-function controller applicable for deep well water pumps using current detection method. The proposed system overcomes various drawbacks of existing sensored system and additional features like Over current protection function due to overload, Under current protection function for idling at low water level and Relay function for starting single phase motors and acts as a level indicator to detect water lever in real time by the current detection method. A prototype of the multi-function controller system is designed and all of its functions are tested in the laboratory. The application of the proposed controller ensures reduction in the power consumption and maintenance cost in the facilities like water and septic tanks, drainage and waste water system, oil and chemical tanks where deep well pumps are used.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.515-520
• /
• 2002

This paper begin a new approach in the water-gate controller using radio communication. The dissertation is on the controllable device development of water-gate in the remote distance from water-gate trough the transceiver by radio communication. The proposed water-gate control device is simple in structure, an suitable for implementation of water-gate control in the remote distance. The remote controller water-gate device inspected the up and down motion of water-gate through the LCD displayer, so that it was very safety driving about the surroundings information, over loading and position of water-gate, and so on.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.375-378
• /
• 2011

This study is intended to realize an intelligent controller using fuzzy control algorithms in order to recycle energy by recycling the waste water heat discharged by waste water heat collection boilers. Using waste water inflow temperature changes and waste water inflow amount changes as parameters, we present characteristic curves of the number of compressors being operated at fixed speeds and the temperature of hot water being discharged. We propose an intelligent controller that determines the optimum number of compressors being operated at fixed speeds in real time by measuring changes in the temperature and amount of waste water inflows in order to minimize the number of compressors being operated at fixed speeds relative to the waste water load flowing into the waste water heat collection boiler.

• 한국지능시스템학회논문지
• /
• 제13권3호
• /
• pp.322-327
• /
• 2003

가압경수로 원자력 발전소의 증기발생기 수위는 유량의 변동에 상반되는 수축(shrink)과 팽창(swell) 효과 등의 특성을 가지고 있으므로 제어가 어려운 대상으로 알려져 있다. 본 논문에서는 신경망을 이용하여 원자력발전소에서 사용되고 있는 두 개의 PI 제어기 중 부적절한 게인으로 조정된 제어기를 먼저 선택하고, 선택된 제어기의 게인을 퍼지 논리를 적용하여 조정하도록 구성하였다. 게인 조정을 위해 사용되는 기본 정보는 수위, 급수량, 그리고 증기량이다. 이 세 가지의 정보를 바탕으로 신경망을 통해 수위 제어기 또는 급수량 제어기 둘 중 하나의 제어기가 선택한 후 퍼지 자기동조기(self-tuner)를 이용하여 PI 제어기의 게인을 알맞게 조정하게 된다. 퍼지 자기동조기의 규칙은 증기발생기의 상태를 표현하는 입ㆍ출력 데이터의 특성으로부터 추출하였다. 이상의 두 과정을 통해 적절한 제어기를 선택하고, 선택된 제어기의 게인을 알맞게 조정하는 것이 본 논문의 목적이다.

• 한국전자통신학회논문지
• /
• 제6권5호
• /
• pp.717-722
• /
• 2011

본 논문은 원통형 세라믹관에서 온수를 순간적으로 가열하여 설정된 온도 및 수량으로 제어하고자 전자 제어기를 개발하였다. 순간온수기의 구조는 유입되는 온수가 원통형 세라믹 히터를 통하여 열량을 공급하여 온도를 제어하고자 설계하였고, 또한 수량센서와 임펠러를 이용한 수량을 제어하는 전자 제어기를 설계하였다. 순간온수의 제어방법은 유입되는 유량에 열량을 공급하는 원통형 세라믹 히터의 수학적인 모델링을 수립하여 제어기 적용하였고, 이에 대한 실험결과는 설정온도에 따라 제어가 잘 적용되어, 효율적이고 실용성 결과를 보였다. 따라서 원통형 세라믹 순간온수기는 향후 실용제품에 적용할 수 있는 제품구조와 제어 방법을 제시하였다.

• 전자공학회논문지
• /
• 제54권1호
• /
• pp.131-136
• /
• 2017

본 논문에서는 출력단에 외란이 존재하는 수위 제어 시스템을 안정화하는 제어기를 제안하였다. 출력단의 외란의 효과를 감소시키기 위하여 여러 기법들이 제안되었지만 시스템에 존재하는 시간지연으로 인해 기대한 만큼 제어성능이 나오지 않고, 시간지연을 해석하기도 쉽지 않다. 이런 문제를 해결해보고자 PI 제어기에 필터를 도입해서 외란의 영향을 감소시키고, 외란관측기(Disturbance Observer)를 추가로 적용하여 출력단 외란의 영향이 감소되는 것을 검증하였다. 제안된 제어기는 MATLAB 시뮬레이션을 이용하여 성능을 검증하였다.