• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.736-740
• /
• 2004

Preparation of ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc that was obtained after preparation of white tail ginseng extract. As a result of extraction of white tail ginseng under various concentrations of ethanol (0∼90%), both amount of acidic polysaccharide and extraction yield decreased by increasing the ethanol concentration. However, acidic polysaccharide extracted by water from white tail ginseng marc was increased in accordance with the increase of ethanol concentration. The optimal condition for the extraction of acidic polysaccharide from the marc was treatment of $\alpha$-amylase in 390∼650 unit/g residue/15 mL of distilled water for 5 min at 4$0^{\circ}C$. The amount of acidic polysaccharide in water extract of the marc was increased from 8.3% to 10.5% by the treatment of $\alpha$-amylase. A new ginseng extract mixture was manufactured by mixing 50% ethanol extract of white tail ginseng and water extract of alcoholic residue in the ratio of 8:2 (w/w). Crude saponin content and acidic polysaccharide content were 10.5% and 17%, respectively. The mixture had a same crude saponin content and twice acidic polysaccharide content comparing to 50% ethanol extract of white tail ginseng. It suggests that preparation of new ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc has high potencies in the utilization of waste material.

• Korean Journal of Food Science and Technology
• /
• v.51 no.1
• /
• pp.18-23
• /
• 2019

An enzymatically saccharified tapioca and hulled barley (TB) raw mixed solution was used to examine alcohol fermentation characteristics. The TB mixture was liquefied with 0.04% ${\alpha}-amylase$ "Spezyme-Fred" and saccharified using an enzyme mixture (GPB), which consisted of glucoamylase (G), protease (P), and ${\beta}-glucanase$ (B). After the TB mixture (7:3, w/w) saccharified for 150 min at $50^{\circ}C$, its glucose content was 12.9% and viscosity was 26 cp. The use of GPB for the saccharification of TB was appropriate because the addition of ${\beta}-glucanase$ increases the glucose yield and decreases the viscosity of the saccharification liquid. The TB ratio was optimized to 7:3 (w/w) on the basis of the lower viscosity and the higher glucose content after saccharification. After TB mixture with 300% (w/w) water content was better condition than others for alcohol fermentation when it was carried out at $30^{\circ}C$. The alcohol and glucose contents of the TB mixture fermented for 72 h were 9.0 and 0.02%, respectively, and the pH and total acidity were 4.3 and 0.3%, respectively.

• Korean Journal of Poultry Science
• /
• v.45 no.2
• /
• pp.89-96
• /
• 2018

This study aimed to investigate the effect of adding sodium tripolyphosphate (STPP) and canola oil on the quality traits of chicken nuggets. The nuggets were prepared from the breast meat of 75-week-old Hy-line old layer. Experiment 1 was conducted to evaluate the effect of adding different levels (0%, 0.1%, 0.2%, and 0.3%) of STPP addition (w/w). It was found that moisture content and cooking yield were significantly increased by the addition of STPP (P<0.05). STPP addition significantly increased hardness and Warner-Bratzler shear force (WBSF) value (P<0.05). Thereafter, STPP addition was fixed at 0.3% (w/w) and another experiment was performed to investigate the effect of canola oil addition (w/w) at different levels (5%, 10%, and 15%). There was no difference in pH depending on canola oil content. However, emulsion capacity, fat loss, and total water loss increased with the increase in canola oil content (P<0.05). Hardness and WBSF value showed significant decreases as canola oil content increased (P<0.05). Texture and overall acceptance were significantly increased with the increase in canola oil content in a test based sensory evaluation. In conclusion, adding 0.3% STPP and 15% canola oil to chicken nuggets made from the old layer could produce a product with an acceptable quality.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.63-75
• /
• 1997

This study aims to find out the devices to minimize the amount of nitrate ingested from kimchi, the main way of vegetable intake for Koreans, and the basic data to deliver to calculate the total daily intake for Korean, investigating the year-round changes of nitrate content in vegetables for Kimche raw material, and changes of nitrate content by salting of chinese cabbage, and stewed kimchi through the use of different cooking methods. The results obtained were summarized as follow: over between 205-6655mg/kg f.w. in chinese cabbage, 480-3970mg/kg f.w. in chinese radish, 157-5820mg/kg f.w. in lettuce and 29-520mg/kg f.w. in cucumber respectively. Therefore it was strongly adviced to introduce the nitrate limit value of vegetables in Korea if the nitrate content in Kimchi should be reduced to meet the nitrate ADI(Acceptable Daily Intake, 219mg60kg b.w) of FAO.WHO, because the nitrate content in Kimchi reflects the nitrate content in vegetables. In order to keep the low nitrate content in Kimchi. it was adviced to remove the outer leaf which contains 2-3 times higher nitrate content compare to the inner leaf at the time of preparation, i.e. chinese cabbage, before the soaking treatment in salt solution for Kimchi making process. The dehydration by soaking treatment in salt solution occurred at 0.9%~4.7% in leaf midrib and more than 13%~24% in leaf blade. The nitrate content after soaking in salt solution was increased 107%~123% compared with before soaking, increasing rates of nitrate content in the outer and inner leaf midrib were higher than those in leaf blade. The increase of nitrate content in salt solution after soaking due to the dehydration of chinese cabbage by soaking treatment. The Kimchi stew(Kimchi JJige) was processed with and without animal oil, but the amount of nitrate in kimchi stew did not decrease both treatments, but it increased after the processing since the water in Kimchi stew has got low by boiling.

• Analytical Science and Technology
• /
• v.11 no.2
• /
• pp.79-87
• /
• 1998

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. During the testing of cytotoxicity (in-vitro) in neutral red (NR) method, cell survival ratio of UV-B interceptors decreased to just above 0.08 w/v%, and it was observed that the UV-A interceptors the ratio also decreased to just above 0.06 w/v%. In addition patch-tests of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. In absorption curves, UV-B was most suitable for octyl methoxycinnamate (OMC) and UV-A for butyl methoxy dibenzoylmethane (BMDM). For this reason, $Nylonpoly^{TM}$ UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. Zinc oxide (ZnO) and titanium dioxide ($TiO_2$) was used as inorganic UV interceptors. The appropriate mixture ratio of ZnO and $TiO_2$ was 6 to 4:6% of ZnO, 4% of $TiO_2$ and 5% of $Nylonpoly^{TM}$ UVA/UVB were all combined and added to our sunscreen cream. The SPF value of in-vitro was 38.9. In practical application, each sun protection factor (SPF) duration of oil-in-water (O/W) emulsion and water-in-silicone (W/S) emulsion containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. Therefore, this product is fit for use in swimming, climbing or skiing. This research is to minimize skin trouble caused by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

• Food Science of Animal Resources
• /
• v.39 no.6
• /
• pp.888-902
• /
• 2019

Our aim was to investigate the effects of bromelain embedded in double emulsion (DE) on physicochemical properties of pork loin. We evaluated DE characteristics such as size, zeta potential, and microscopy after fabrication. We marinated meat with distilled water (DW), 1% (w/v) bromelain solution, blank DE, and 1% (w/v) bromelain loaded in double emulsion (DE E) for 0, 24, 48, and 72 h at 4℃, and prepared raw meat for control. The marinated samples were assessed for color, water holding capacity, cooking loss, moisture content, pH, protein solubility, Warner-Bratzler shear force (WBSF) and gel electrophoresis. The droplet size of 1% (w/v) bromelain embedded in DE was increased compared with blank DE (p<0.05) and values of zeta potential decreased. The increase in lightness and color difference range of the DE-treated group was lower than that of the DW-treated group (p<0.05). Moreover, treatment by immersion in 1% (w/v) DE E resulted in the highest water holding capacity values (p<0.05) and lower cooking loss values than water base treatment (p<0.05). Results for myofibrillar protein solubility and WBSF showed a similar trend. 1% (w/v) DE E showed degradation of myosin heavy chain after 48 h in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Thus, bromelain-loaded DE is useful for controlling and handling enzyme activity in food industry.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.194-197
• /
• 2008

We measured the efficiency and flue gas concentration of a 90kW woodchip boiler which is for heating water of lodging. At nominal operating condition, the fuel, woodchip is fed into the boiler at a rate of 22.6 kg/h. In order to determine the efficiency of the boiler, we measured the water flow rate, woodchip flow rate, heating value and water content of woodchip, temperature of inlet and outlet of heating water. The results of test show that the power output of the woodchip boiler is 90.0 kW(77,400 kcal/h) and the thermal efficiency of the boiler is 88.5%. By using a gas analyser, flue gas concentrations are measured. The results show that O2 in the flue gas is 10.2%, CO concentration is 393 ppm and NOx concentration is 74 ppm.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.550-558
• /
• 1989

Polycrystalline diamond films have been deposited on Si wafer Ly hot W filament CVD method using CH4H2 mixtures. The effects of surface pretreatment, W filament temperature, CH4 volume fraction, and addition of water vapor on the growth rate and morphology of the films were investigated. Surface pretretment was essential for depositing a continuous diamond film. Raising the filament temperature resulted in an increased growth rate and a better crystal quality of the film. As the methane content is varied from 0.5% to 5%, well-faceted crystals gradually transformed into spherical particles of non-diamond phase with a simultaneous increase in the growth rate. Addition of water vapor markedly improved the crystallinity to produce crystalline particles even with 5% methane mixture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.137-163
• /
• 1990

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the Properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of the consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfate and the magnesium sulfate promoted the hardening and the aluminium phosphate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect of the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate and cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.139-165
• /
• 1991

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfata and the magnesium sulfate promoted the hardening and the aluminium phoshpate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect fo the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near $250^{\circ}C$ and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate ad cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.