• Nuclear Engineering and Technology
• /
• v.12 no.3
• /
• pp.194-213
• /
• 1980

The paper describes and quantifies the wastes arising in the nuclear fuel cycle for Light Water Reactors, Heavy Water Reactors and Fast Breeder Reactors. The management and disposal technologies are indicated, together with their environmental impacts. Both once-through and uranium-plutonium recycle systems are evaluated, and comparisons are made on the basis of tingle reference technologies for waste management, and for one gigawatt/year of electricity generation. Environmental impacts are assessed, particularly that of health and safety, and a reference costing system is applied purely as a basis for comparing the fuel cycles. From this study it call be concluded generally that the relative differences of the impacts of waste management and disposal between the selected fuel cycles are not decisive factors in choosing a fuel cycle. Employing the technologies assumed, the radioactive wastes from any of the fuel cycles studied can be managed and disposed of with a high degree of safety and without undue risk to man or the environment. The cost of waste management and disposal is only a few percent of the value of the electricity generated and does not vary greatly between fuel cycles.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.731-743
• /
• 2018

This study was performed to test the feasibility of thermophilic ($55^{\circ}$) co-digestion of municipal sewage sludge and food wastes. The management variables of co-digestion were the mixed ratios of municipal sewage sludge and food waste hydraulic retention times (HRTs). During the operation of thermophilic co-digestion, the reactor pH ranged from 7.0 to 7.5 and the reactor alkalinity remained above 3,200 to 4,000 mg/L as $CaCO_3$. The volatile fatty acids concentration increased as the HRT shortened from 20 days to 10 days and the mixture ratio increased to 1:4, but did not reach toxic levels for co-digestion of sewage sludge and food wastes. Methane productivity increased gradually as the organic loading rate increased. Maximum methane productivity reached 1.03v/v-d at an HRT of 10 days and at the mixture ratio of 1:4. The TVS removal efficiency decreased from 70.6% to 58.3% as the HRT shortened from 20 days to 10 days. TVS removal efficiency ranged from 57.0% to 77% during the entire operation. It is likely that thermophilic co-digestion of sewage sludge and food wastes is a very effective method both to environmentally treat food waste and to economically produce gas for energy.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.175-190
• /
• 2003

This paper discusses the determinants of green practices and incorporates some empirical findings from a recent study in the petrochemical sector in the Republic of Trinidad and Tobago. The study was comprised of a survey and follow-up interviews with senior executives who participated in the survey. Of fourteen companies involved, the findings affirmed that the investigation of accidents, provision of an emergency response, employee training, decreasing the production of wastes, and pre-treating wastes before disposal should be stressed. Government requirement, the economic reasons and public pressures were the driving forces of green practices. The five most important determinants identified include performance evaluation, financial justification, impacts on company, management leadership and operations integration. Implementing environmental management systems as a feasible approach to green practices in the petrochemical sector was explored. The findings provide guidance that helps organisations to accommodate the determinants of green practices into achieving sustainable environmental goals.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.576-582
• /
• 2015

In recently, the Korea government is concerning on non-point source pollution management to improve water quality. The objective of this paper is to investigate the improvement measurement for management of livestock wastes. As a result, we find that the National Pollution Source Survey is necessary to establish the unified database system with the Korea Statistics(KOSAT) in order to minimize the difference between relevant data. The investigation for environmental impact of livestock manure should be supported the designation of control areas and establishment of the technical guidelines including target material, monitoring site, standard method, etc. In addition, it should be followed by appropriate nutrient recycling and proper fertilizer usage based on social consultation and cost-benefit analysis.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.131-137
• /
• 2016

In unlimited competition era changed rapidly, productivity improvement and raw cost reduction by working improvement are very important for the survival of middle and small-sized companies. At this moment, middle and small-sized companies are cleary important in domestic industry. Therefore, this researcher applied TPS(Toyota production system) 7 wastes by experiment planning method for wastes of lots of working processes at the manufacturing site of automobile assembly manufacturing company, D company, analyzed current system of D company applied so as to verify if value creation works and factors were minimized during the production and drew results by analyzing experimental planning for analyzing waste elimination.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.147-155
• /
• 2013

This paper study is for enhance the productivity. The purpose of this study is save the cost and contribute the enhancing company's competitiveness by analysis overall wastes in production line and improve the wastes in production line. Many company does not have clear process for analysis the wastes in production line. so they use classical IE tool and advanced IE tool by considering their current situation but the result was not so effective. The study to arrange the classic IE and advanced IE by each step to analysis the wastes by each production line include assembly line and processing line and automation line so that we can predict the mount of the overall wastes and easily select / focus on the tool for maximize the improvement result. It will contribute to establish the mid term and long term improvement activity plan.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.165-169
• /
• 2014

In order to use the nuclear energy as the sustainable energy source, the safe and efficient management of radioactive wastes generated from the nuclear fuel cycle including NPP decommissioning is one of the most important factors. The establishment of acceptance criteria for very low level radioactive wastes generated from decommissioning of nuclear power plant in a large quantity is seemed to play a key role for developing a radioactive wastes disposal strategy as well as NPP decommissioning strategy. In this thesis, we want to review the acceptance criteria of low-and-intermediate-level radioactive wastes in this country through the analysis of other country's acceptance criteria.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.77-86
• /
• 2008

On account of increasing interest of substantiality in these day, it is needed to make an effort to establish an environmentally sustainable production system for the construction works. Although practical affairs and researches are in progress to reduce and recycle construction wastes, as a result of a research, there are still obstructive factors on waste reduction and recycling which they don't interact efficiently between waste disposal process of the construction area and waste disposal company. As a plan to revitalize reduction and recycling of construction wastes, this research focuses on finding obstructive factors and giving solutions to reduce and recycle construction wastes which comes from construction process and construction industries. To meet the needs of the research, firstly relatively significant construction wastes (concrete, soil, brick, block, asphalt, plastic, lumber) were identified. On site level interviews with management of disposal companies and construction sites were conducted as well, focusing on typical waste disposal process. Throughout this interviews, obstructive factors were conducted. A result of the research, the authors suggest an improved approach on disposal and recycling for construction waste by prioritizing the identified factors and ranking the importance level of each factor. And, by identifying factors obstructing reduction and recycle of construction wastes, this research suggests improved disposal process of construction waste.

• 수도
• /
• s.64
• /
• pp.34-41
• /
• 1993

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.46-53
• /
• 2000