• Title/Summary/Keyword: waste treatments

Search Result 240, Processing Time 0.028 seconds

Evaluation of Compost Qualities with or without Microbial Inoculation for Food Waste Composting (미생물제 첨가유무에 따른 음식물 쓰레기 퇴비 부숙도 평가)

  • Jeong, Jun-Young;Jung, Kwang-Yong;Nam, Sung-Suk
    • Korean Journal of Environmental Agriculture
    • /
    • v.18 no.3
    • /
    • pp.280-286
    • /
    • 1999
  • This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.

  • PDF

Developing decomposition of heavy metals in mining ground waste water (광산폐수의 중금속처리기술의 개발)

  • 이영신;오대민
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.12 no.2
    • /
    • pp.96-100
    • /
    • 2002
  • This study is aimed at prevention and countermeasurements of the mine wastewater pollution caused by a mineralized area using heavy metals. Objective of this study is selected to a high positive ion methathesis capacity of the environmental integrity character materials, as well as applied to the mine wastewater treatments. Also, the environmental integrity character materials is selected Kaolin. Silica, Zeolite, Fly ash. Thus, this environmental integrity character matters will be proved in the reduced heavy metals level and fine water quality of effluent.

A Study on the 3M′s Approach to Environmental Management by Technological Innovation (3M사의 환경경영시스템에 관한 고찰)

  • 김현수;박영택
    • Journal of Korean Society for Quality Management
    • /
    • v.27 no.3
    • /
    • pp.170-188
    • /
    • 1999
  • In all activities of companies, manufacturing processes are one of those which have the worst effect on our environment. So manufacturing companies have taken the necessary steps to comply with environmental regulations. But, most of them focused on the environmental standard control equipments, using ‘end-of-pipe techniques’ that can obtain the desired reductions in a short time-period. But these methods are essentially symptomatic treatments and are not enough for sustainable development. 3M's solution is the ‘cleaner techniques’which emphasize prevention rather than corrective control. This paper examines the concept of cleaner techniques and the environmental management system of 3M - how to conduct technological innovation to prevent generation of pollution and waste at the source under the 3P program.

  • PDF

An overview of new oxidation methods for polyacrylonitrile-based carbon fibers

  • Shin, Hye Kyoung;Park, Mira;Kim, Hak-Yong;Park, Soo-Jin
    • Carbon letters
    • /
    • v.16 no.1
    • /
    • pp.11-18
    • /
    • 2015
  • The process of oxidizing polyacrylonitrile (PAN)-based carbon fibers converts them into an infusible and non-flammable state prior to carbonization. This represents one of the most important stages in determining the mechanical properties of the final carbon fibers, but the most commonly used methods, such as thermal treatment ($200^{\circ}C$ to $300^{\circ}C$), tend to waste a great deal of process time, money, and energy. There is therefore a need to develop more advanced oxidation methods for PAN precursor fibers. In this review, we assess the viability of electron beam, gamma-ray, ultra-violet, and plasma treatments with a view to advancing these areas of research and their industrial application.

A Study on Standardization of the Electric Facilities for distribution & Translations - Focused on the Electric Facilities in Subway Stations - (수변전설비의 표준화에 관한 연구 - 지하철 역사전기설비를 중심으로 -)

  • Cho, Sung-Pil;Kang, Cha-Nyeong;Kim, Hak-Lyun
    • Proceedings of the KSR Conference
    • /
    • 2006.11b
    • /
    • pp.838-843
    • /
    • 2006
  • In our modern society, such electric facilities as lighting, elevators, water supplies, drainages, waste water treatments and landscape lighting are being more enlarged, diversified and technology-intensive owing to outstanding technological development, while they require reliable and safe electricity. On the other hand, as more electric energy is consumed with more complicated systems operated, any accident from a personal electric system is likely to have wider spreading effects. In particular, the electric receivers and transformers installed for such public facilities as subway stations require highest safety, reliability and economy, but such requirements tend to be less considered than such financial requirements as budget conditions, much less their safety and reliability. In such a circumstance, this study was aimed at suggesting some standards for safe, reliable and economic subway electric systems in terms of their scale, location and uses. Specifically, this study put forwards the ways to optimize and standardize the electric systems including receivers and transformers for subway stations in order to make them safer, more reliable and economic.

  • PDF

Preparation and Evaluation of Chitin Derivatives and Their Utilization for Waste-water Treatement

  • Aly, Aly Sayed;Jeon, Byeong-Dae;Kim, Young-Jun;Park, Yun-Heum
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1996.10a
    • /
    • pp.53-58
    • /
    • 1996
  • The Chitin Thiocarbonate-Fe(II)-H2O2 redox initiator system was investigated for the graft copolymerization of acrylonitrile(AN) and acrylic acid(AA) monomers onto chitin powder. The reactions with vinyl monomers onto chitin were carried out under various the graft copolymerization conditions to elucidate the polymerization behavior in terms of graft yield. Reactions of chitin-acrylonitrile graft copolymer with hydroxyl amine hydrochloride and those with sodium hydroxide were conducted in order to obtain chitin-(amidoxime-co-acrylonitrile) and chitin-(acrylate-co-acrylamide) graft copolymers, respectively. The reaction efficiency was observed to depend on the alkali concentration, time, temperature, and the reactant concentrations. The prepared chitin derivatives were evaluated to find potential applications for use in wastewater treatments for adsorption and desorption of heavy metal ions as well as acidic and basic dyes.

  • PDF

The Preparation of porous ceramic material from aluminum waste dross (알루미늄 廢드로스를 活用한 세라믹 多孔體의 製造)

  • Kim, Ki-Seok;Park, Jay-Hyun;Park, Jai-Koo
    • Resources Recycling
    • /
    • v.14 no.2
    • /
    • pp.19-27
    • /
    • 2005
  • The recycling possibility of aluminum waste dross(AWD) as a ceramic raw material of porous light-weight material was examined. A aluminum waste dross was washed 4-7 consecutive times and roasted at 900$^{\circ}% for 1hour as pre-treatments. The properties of the pre-treatment of aluminum waste dross was investigated. It was conformed by XRD result that the spinel crystalline was grown in AWD, after roasting. After the roasted AWD was ground in aqueous state, the sodium hexaphosphate(SHP) as a dispersant which is used for stabilizing the concentrated slurry was added to the AWD slurry. The porous material was prepared by slurry foaming method with surfactant at room temperature. The foamed slurry volumes were 2 and 3 times of the original slurry volume. The properties of porous material with extended volume of 3 times was following: the porosity was about 84%, bulk density was 0.59 g/cm$^3$, the range of pore was from 50 ${\mu}m$ to 500 ${\mu}m$ and mean pore size was about 200 ${\mu}m$. AWD porous material was sintered at 1150$^{\circ}C-1250$^{\circ}C. It was colcluded that AWD was sintered well at 1200$^{\circ}C from material surface observation by SEM.

A study on an effect of food waste compost for rock cut-slope revegetation (암비탈면녹화에 음식물퇴비의 활용방안에 관한 연구)

  • Cho Hae-Yong;Chang Pil-Kyu;Kim Hyung-Ju
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.6 no.4
    • /
    • pp.296-301
    • /
    • 2005
  • This study was conducted to get the basic data on an effect of food waste compost for rock cut-slopese vegetation. Two foreign cool-season grasses and native plants were used for this experiment. Cool-season grasses were Festuca ruba and Lolium perene, Native plants were Amorpha fruticosa, and Indigofera pseudo-tinctoria. Amorpha fruticosa, Indigofera psendo-tinctoria, and Lolium perenne decreased in germination rate and plant height at NaCl concentrations of $0.4\%$ or over suddenly. Festuca rubra occurred to the sudden growth hindrance at NaCl concentrations of $0.2\%$ or over. Amorpha fruticosa and Indigofera pseudo-tinctoria appeared for germination of $45\%$ at all experiment plots. Lolium perenne increased in plant height as trial rate of food waste compost was abundant. Ground cover rate was the highest in Mixture III by $89.3\%$ and was fluctuated from $47.0\%$ after 30 days to $64.1\%$ after 45 days in Mixture 1. Descending order of ground cover rates in 4 treatments was Mixture III, Mixture IV, Mixture II, and Mixture I. As the growth

  • PDF

Effects of Feeding Mushroom Substrate Waste and Probiotics on Productivity, Emission of Gases and Odors in Manure for Finishing Pigs (버섯재배 폐배지와 생균제의 급여가 비육돈의 생산성, 돈분 중 가스 및 냄새발생에 미치는 영향)

  • Choi, S.C.;Chae, B.J.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.4
    • /
    • pp.529-536
    • /
    • 2003
  • A total of 72 finishing pigs(L${\times}$Y${\times}$D; 80kg of initial body weight) were employed for 5 weeks to investigate the effects of feeding mushroom substrate waste(MSW) treated with pleurotus ostreatus and probiotics on productivity, carcass traits, nutrient digestibility and emissions of harmful gases and malodor in manure. Treatments were Control(C: basal diet), T1(3% MSW) and T2(3% MSW+ 0.1% probiotics). Average daily gain(ADG) was lower(p<0.05) in pigs fed a T1 diet than those fed a C diet, however, there was no difference in ADG of pigs fed diets between C and T2. Similar trends were found in feed/gain(F/G) among treatments, though feed intake was not different. No differences were found in back fat thickness among treatments, but carcass dressing percentage was significantly(p<0.05) improved in pigs fed a T2 diet compared to C or T1 diets. Nutrient digestibilities including dry matter, crude protein, energy and crude fiber were lower(p<0.05) in T1 than C or T2. $NH_3$ and $H_2S$ gas emissions were reduced(p<0.05) or not produced in pig manure from T2 as compared to C or T1. In conclusion, the present result shows that feeding MSW with probiotics is desirable for finishing pigs in terms of productivity, carcass traits and nutrient digestibility. It also appears that the emission of harmful gases and malodor in manure can be reduced by the inclusion of probiotics in the diet.

Fertilizer Effect of Waste Nutrient Solution in Greenhouses for Young Radish Cultivation (열무 재배를 위한 시설하우스 폐양액의 비료 효과)

  • Hong, Youngsin;Moon, Jongpil;Park, Minjung;Son, Jinkwan;Yun, Sungwook
    • Journal of Bio-Environment Control
    • /
    • v.31 no.4
    • /
    • pp.460-467
    • /
    • 2022
  • The purpose of this study is to enhance utilization of the waste nutrient solution (WNS) disposed at the hydroponic greenhouse. Several sets of testing were conducted to examine the effects of WNS: (a) a fertilizer effect, (b) soil column leaching, and (c) crop cultivation. The fertilizer effect test was applied in young radish cultivation by examining the growth characteristics of young radish and soil based on inorganic nitrogen according to the soil treatment of the nitrogen fertilizer (NF) and the WNS. The fertilizer effects and crop cultivation test were conducted with five treatments (A-E): A, non-treatment (water); B, 100% of NF; C, 70% of NF + 30% of WNS; D, 50% of NF + 50% of WNS; and E, 30% of NF + 70% of WNS. The soil column leaching test was conducted with three treatments: non-treatment (water), 100% of NF, 50% of WNS + 50% of NF. As a result, the chemical properties of the WNS were pH 6.0, EC 2.4dS·m-1, total phosphorus (T-P) 28mg·L-1, ammonium nitrogen (NH4-N) 5.0mg·L-1, and nitrate nitrogen (NO3-N) 301mg·L-1. The chemical properties of the soil were pH 5.51, EC 0.31dS/m, organic matter 2.08g·kg-1, NO3-N 9.64mg·kg-1, and NH4-N 3.20mg·kg-1. The results of fertilizer effects showed that the ratio of 50% or less of NF and 50% or more of WNS was high in young radish growth. There was no statistically significant difference between the soil chemistry in the C-E treatments where WNS was mixed with NF and the B treatment where only NF was applied. As a result of the soil column leaching test, there was no significant difference in the concentrations of NO3 and NH4 in the treatment of 100% of NF and 50% of NF + 50% of WNS. The study indicates, if the mixed fertilizer of WNS and NF is applied in the soil cultivation of young radish, it will reduce the use of NF and environmental pollution. This also helps reduce production costs on farmers and increase the yield of young radish.