• 한국환경과학회지
• /
• 제10권4호
• /
• pp.311-314
• /
• 2001

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity that those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 kg to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.345-350
• /
• 2011

Antioxidant agent, 1,1,3-tris(2-methyl-4-hydroxy-5-tert-butylphenyl)butane were prepared and investigated the antioxidant activity on recycled rubber mat manufactured with waste tire powder. Mechanical properties of rubber mat are influenced by many factor such as compounding ingredients and state of cure, process of rubber, and fillers. Our study aim is to investigate influence of antioxidant activities on ozone cracking and the thermal aging time. In this work, the degradation of recycled rubber mat was studied and suggested mechanism to involve two-type of degradation, thermal aging and cracking both of which can be contained antioxidant or non-antioxidant agent.

• Smart Structures and Systems
• /
• 제23권2호
• /
• pp.207-214
• /
• 2019

Achieving a pervious concrete (PC) with appropriate physical and mechanical properties used in pavement have been strongly investigated through the use of different materials specifically from the global waste materials of the populated areas. Discarded tires and the rubber tire particles have been currently manufactured as the recycled waste materials. In the current study, the combination of polymer, silica fume and rubber aggregates from rubber tire particles have been used to obtain an optimized PC resulting that the PC with silica fume, polymer and rubber aggregate replacement to mineral aggregate has greater compressive and flexural strength. The related flexural and compressive strength of the produced PC has been increased 31% and 18% compared to the mineral PC concrete, also, the impact resistance has been progressed 8% compared to the mineral aggregate PC and the permeability with Open Graded Fraction Course standard (OGFC). While the manufactured PC has significantly reduced the elasticity modulus of usual pervious concrete, the impact resistance has been remarkably improved.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.97-107
• /
• 2006

폐타이어와 폐수지 처리 문제를 해결하기 위한 방법으로 재생 폴리에틸렌 수지와 신재HDPE를 폐타이어 분말(GWTP)과 치합형 동방향 회전 이축 압출기(Fuly Intermeshing Co-rotating Twin Screw Extruder)를 이용하여 각 조성별로 용융 훈련하여 재생 PE/폐타이어 복합체를 제조하였다. 본 연구에서는 플라스틱 수지 (재생 PE, HDPE)와 폐타이어 분말의 혼합비를 $0\sim50$wt.%로 하였으며, ASTM에 의거하여 인장강도, 파단신율, 충격강도 등의 물성 변화를 확인하였다. 폐타이어 분말 함량이 증가할수록 인장강도가 감소하고 파단신율이 증가하였다. 한편 충격강도는 폐타이어 분말 함량이 30 wt.%일 때 최대이고, 함량이 증가할수록 충격 강도가 감소하는 경향을 나타내었다. 형태학적 고찰에서는 폐타이어 분말의 함량의 증가함에 따라 파단면이 거칠어지는 형상을 관찰하였다. 모세관점도계(Capillary Rheometer)를 이용하여 재생 PE/폐타이어 분말 복합체의 전단속도의 변화에 따른 용융전단점도의 변화와 연화점 (Ts) 등의 유변학적 성질을 분석한 결과, 폐타이어 분말 함량 증가에 따라 외부 응력에 대한 흐름 저항성을 증가시켜 용융점도가 상승하는 결과를 보였으며 측정된 전단율에서 전단 점도는 Power-law 거동을 보였다.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.17-23
• /
• 2016

In this study, the reclaimed polypropylene (RPP) and waste ground rubber tire (WGRT) were used to simulate the thermoplastic vulcanizate (TPV) for cost reduction and resources recycling. Also, we examined the effects of dicumyl peroxide (DCP) and 2,5-dimethyl-2,5-di-(tert-butylperoxy)-hexane (DTBPH) as peroxide type cross-linking agents to enhance the properties of TPV's. The components of RPP and WGRT were fixed at 30 and 70 wt%, and DCP and DTBPH were added in the concentrations from 0.5 to 1.5 phr, respectively. RPP/WGRT composites with different contents of DCP and DTBPH were prepared by a modular intermeshing co-rotating twin screw extruder. The Young's modulus of composites were decreased with increasing peroxides contents. On the other hand, tensile strength, elongation at break, and impact strength of the composites were increased with peroxide contents. We also confirmed that interfacial adhesion between RPP and WGRT was considerably improved by adding the peroxides. Taken together, DTBPH added RPP/WGRT composites exhibited better mechanical properties rather than those of DCP added composites.

• Elastomers and Composites
• /
• 제29권3호
• /
• pp.207-212
• /
• 1994

Recently, the develpment of waterproof techniques has been required in morden building field. It is undoubt that one of the best materials for waterproof is polyurethane. Polyurethanes have advantages such as good adhesive ability, durability, weatherproof. However, they have disadvantages like high cost, delicate varnish layer, swelling problem. In this study, we found that the polyurethane with rubber particle of waste tire can solve those problems. We concluded that 10% of rubber particles containing polyurethane was recommened as the waterproof materials.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.330-334
• /
• 2019

Cryogenic crushing techniques have been employed for recycling waste rubber articles and for extracting residual organic additives present in rubber samples. Rubber particulate derived from tire tread abrasion is one of the key components of road dust. Therefore, in this work, we prepared rubber particulates using a cryogenic crusher and characterized their shapes as well as size distributions according to the type of rubber. The rubber particulates exhibited uneven surfaces with the presence of some small pieces. The order of the particle size distribution was observed to be: NR > BR > SBR. Subsequently, carbon black was added; this led to a decrease in the particle size and the shape becoming rougher. The crushed particulates of the carbon black-filled samples comprised agglomerated shapes of small pieces, which were similar in shape to that of wear debris in tire tread. It was discovered that crosslink density was one of the principal factors that led to the formation of small crushed particulates. The small particulates obtained by cryogenic crushing can be utilized as model rubber particulates for researching micro dust.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.49-56
• /
• 2006

Allylamine을 이용하여 UV하에서 폐타이어 분말을 개질하였으며, 이를 이용한 PP/폐타이어분말 복합체의 열적, 유변학적 성질을 분석하였다. X-ray 분석결과 무수말레 산이 그라프트된 폴리프로필렌과 같은 상용화제가 없는 경우 ${\beta}$ 결정의 피크 강도가 증가한 반면 상용화제가 있는 경우 완전히 없어짐을 알 수 있었으며, DSC 결과에서도 이를 확인할 수 있었다. 개질된 폐타이어 분말을 함유한 복합체의 용융점도와 탄성모듈러스는 개질되지 않은 분말을 함유한 복합체 보다 높은 값을 나타내었으며, 이는 개질된 분말 표면의 아민기와 말레이산이 그라프트된 PP의 상호작용에 기인하는 것으로 판단된다.

• 환경위생공학
• /
• 제15권4호
• /
• pp.98-104
• /
• 2000

Commercial rubber(IR, NR, BR), SBR, and tire were degraded by thermal degradation process. The oil yield of rubbers and tire ranges about 37~86%, it was increased with increase of operation temperature in pyrolysis. And the yield of pyrolytic oil was increased with increase of heating rate. The maximum oil yields of IR, NR, BR, SBR, and tire were 80, 73, 83, 86 and 55% each at $700^{\circ}C$ with a heating rate of $20^{\circ}C$/min, respectively. The pyrolytic oil components were consisted of about 50 aromatic compounds. The calorific value of purolytic oil of commercial rubber, SBR, and tire was measured by calorimeter, it was 39~40 kJ/g. The BET surface area of pyroblack was $47~63m^2/g$. The optimum condition of pyrolysis was operating temperature of $700^{\circ}C$ with heating rate of $20^{\circ}C$. Therefore, the pyrolytic oil and pyroblack are possible to alternative fuel and carbon black.

• 에너지공학
• /
• 제26권3호
• /
• pp.97-104
• /
• 2017

본 연구에서는 폐타이어의 열분해 특성을 알아보기 위하여 유동층 반응기를 이용하여 450에서 $650^{\circ}C$ 범위에서 급속 열분해를 실시하였다. 반응 온도의 변화에 따른 열분해 오일의 특성을 관찰하고 특히 폐폴리프로필렌을 폐타이어와 혼합하여 열분해를 실시할 때 열분해 부산물 내 황의 거동을 살펴보았다. 열분해 오일의 수율은 반응 온도 $456^{\circ}C$에서 약 52wt.%로 가장 높게 나타났다. 생산된 오일의 GC-MS 분석 결과 반응 온도가 증가할수록 지방족 화합물의 함량은 줄어드는 반면 방향족 화합물의 함량이 급격히 증가하는 것으로 나타났다. 주요 화합물은 리모넨(Limonene), 톨루엔(Toluene), 자일렌(Xylene), 스타이렌(Styrene), 트리메틸벤젠(Trimethylbenzene) 그리고 메틸나프탈렌류(Methylnaphthalenes)이었으며 미량의 황 화합물과 질소 화합물도 검출되었다. 폐폴리프로필렌을 폐타이어와 혼합 열분해 한 결과 열분해 오일 내 황의 함량이 급격히 감소하는 것을 관찰할 수 있었다.