• Plant Resources
• /
• v.3 no.3
• /
• pp.226-232
• /
• 2000

The availability of enokitake cultural waste for Lentinus edodes cultivation was investigated, although hardwood sawdust has traditionally been used as a substrate for this fungus. Firstly, physiochemical characteristics of cultural waste were analysed. Secondly, mycelial growth characteristics and fruiting yields of L. edodes on waste treated in some methods were determined. Physiochemical characteristics of enokitake cultural waste showed that the millwaste complex was a little degraded by enokitake fungus and suggested the probability that most component lost by enokitake could be rice bran. Mycelia of L. edodes grew and fruited well on waste supplemented by fresh rice bran and Quercus sawdust although didn't on waste only. Mycelial growths of these fungi on waste were accelerated when supplemented by rice bran to the percent of 40(w/w) but decreased or suppressed at above ratios(30, 40%, w/w). Supplementations of oak sawdust at above 40%(w/w) of the waste and rice bran at 20%(w/w) of the sawdust allowed such a good mycelial growth as to be selected as a pertinent mixing ratio for fruiting medium. A fruiting yield on enokitake cultural waste supplemented by oak sawdust (at 40% of the waste, w/w) and rice bran (at 20% of the sawdust, w/w) was not inferior to that on oak sawdust supplemented by rice bran only (at 20% of the sawdust, w/w). These results indicated strongly the potentiality of enokitake cultural waste as raw materials for shiitake cultivating substrates.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.12-21
• /
• 2013

Waste electrical and electronic equipment(WEEE or E-waste) is one of the fastest growing waste stream in Korea. The proper management of such equipment has become of major concern for solid waste professionals because of the large growth of the waste stream and the presence of a myriad of toxic materials in it. In this paper, in order to evaluate the economical value of the recycling metallic materials from the E-waste, big size electrical home appliances, small size electrical home appliances, end of life hand phone and PCB(printed circuit board) were reviewed.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.12-15
• /
• 1995

In this paper, some representative waste tire pyrolysis were investigated together with the analysis of the problems associated with the commercialization of various waste tire treatment technologies. Also, R & D results on recovering the oil from the pyrolysis of waste tires, when waste oil was used as a heating medium, were summarized in this study. Experimental results show that the present pyrolysis process has both lower pyrolytic temperature and higher pyrolysis rate than usual one and that the quality of the product oil and residue obtained was relatively even with large availability.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.92-101
• /
• 2021

The status of waste generation and recycling in 32 countries in the European Union (EU), Japan, and the United States was investigated and summarized to encourage overseas market expansion for domestic urban mining industries. Among the 32 EU countries, Germany has the highest amount of material consumption and generates the largest quantity of waste. Minerals such as mine and soil wastes constitute the largest type of waste in the EU. With respect to waste treatment techniques, landfill and recycling are applied to 39% and 38% of the waste, respectively, implying the necessity to promote recycling. Japan's total waste generation declined recently to less than 400 million tons. The largest amount of waste is generated by the manufacturing industries. The proportion of total recycled waste is estimated to be slightly over 50%, but the proportions are greater than 90% for metal scrap and 60% for waste plastics. The amount of waste produced in the United States recently exceeded 265 million tons; 52.1% of the waste is landfilled, while only 25.1% is recycled. Therefore, the recycling industry has to be developed further.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.512-513
• /
• 2009

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.542-542
• /
• 2011

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.209-215
• /
• 2022

This study aims to analyze the livelihood resources and income diversification of informal recyclers in the Mekong River Delta (MRD). The multiple linear regression model was applied to determine income diversification and total household income with the sustainable livelihood analysis framework developed by the United Kingdom Department for International Development (2000), including human resources, physical resources, natural resources, financial resources, and social resources. The results indicated that up to 25% of itinerant waste buyers worked on average more than 7.3 hours/day, which was higher than the urban near-poor level regulated by the Vietnam government. The results of the regression model revealed that total households' income was affected by the factors of health status, gender, urban location type 1, the amount of potential savings, and informal credit participation, while the factors of health status, urban location, the amount of potential savings, and informal credit participation have the effect of diversifying farm household income. Thus, if the informal waste recycling sector is supported and regulated by proper government management, it will not only help poor households diversify their income, but it will also help poor households diversify their income, particularly women's income, which is vulnerable and lower than male income in the MRD.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.64-71
• /
• 2014

Accelerated carbonation is a technique that can be used as a CCS technology for $CO_2$ sequestration of approximately 5~20% in a stable solid through the precipitation of carbonate. An alkaline inorganic waste material such as ash, slag, and cement paste are generated from incinerators, accelerated carbonation offers the advantage of lower transport and processing costs at the same generation location of waste and $CO_2$. In this study, we evaluated an amount of $CO_2$ sequestration in various types of inorganic alkaline waste processed by means of accelerated carbonation. A quantitative evaluation of $CO_2$ real sequestration based on a TG/DTA analysis, the maximum 118.88 $g/kg_{-waste}$ of $CO_2$ in paper sludge fly ash, the maximum 134.46 $g/kg_{-waste}$ of $CO_2$ in municipal solid waste incinerator bottom ash, the maximum 9.72 $g/kg_{-waste}$ of $CO_2$ in industrial solid waste incinerator fly ash, and the maximum $18.19g/kg_{-waste}$ of $CO_2$ in waste cement paste.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.70-73
• /
• 2004