• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.244-248
• /
• 2013

"Hwaseong 5ho" was developed by the method of Di-mon mating between monokaryotic strains derived from "Hwaseong 1ho" and dikaryotic strain "PSC109". The color of pileus was dark grayish brown, the shape of pileus was convex or infundibuliform. The length of stipe was longer and the thickness of stipe was some thinner than Suhan 1ho. Material properties of stipe of "Hwaseong 5ho" was higher in strength, hardness, chewingness and brittleness than Suhan 1ho, but similar in elasticity and cohesion. RAPD using URP-primer showed not the same between two strains. Days of primordia formation period were 22-27 days after spawning, that was a little later than Suhan 1ho. In the trial using culture box containing composted cotton waste, yield index of 'Hwaseong 5ho' was 16.6% higher than Suhan 1ho. The farm field trial were showed stable productivity in each different growing conditions.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.259-265
• /
• 2012

Differently from fly ash, the bottom ash produced from thermal power generation has been treated as an industrial waste matter, and almost reclaimed or was applied with the additive of the part concrete. Bottom ash has various problems to use with the aggregate. Bottom ash is lighter than typically the sand or the gravel and it's physical properties (compressive strength etc.) is somewhat low because of high absorptance. In order to manufacture the ash concrete, we used a bottom ash as a main material and a pure sulfur as a binder. In this study, fundamental research methods that vary the grain-size of bottom ash and the ratio of sulfur vs ash were investigated to improve the quality of ash concrete such as compressive strength. Bottom ash in this research which occurs from domestic 4 place power plants, was checked physical and chemical properties. The compressive strength seems the result which simultaneously undergoes an influence in content of the sulfur and Bottom ash grain-size. We got the result of the maximum 92 MPa. The compressive strength was high result for grain size below 1.2 mm and high sulfur content.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.222-230
• /
• 2016

HEMIRE is a 6,000-meter-class remotely operated vehicle (ROV) that has been developed for observation and sampling of objects of interest on the deep seabed. We first carried out deep-seabed exploration around the slopes of the Hupo Bank and the Ulleung Basin in the East Sea in June 2015. Over two weeks, a total of 10 dives were made from a support ship, the R/V Onnuri, at eight stations with water depth ranging between 194 and 2,080 m. The dive times ranged from 1 to 6 hours, depending on the operating conditions. We obtained the following results: 1) video images of the deep seafloor; 2) red snow crab density data (a major fishery resource) and inventories of deep-sea fauna, including an unrecorded organism; 3) specific topographies such as canyons slopes; 4) an undisturbed sediment core obtained using a push corer; and 5) observations of the seabed surface covered with discarded anthropogenic waste material.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.97-102
• /
• 2002

Ce-pyrochlore (CaCe $Ti_2 $O_7)was synthesized to study its properties and phase relations in CaO-Ce $O_2$-Ti $O_2$ system because Ce-pyrochlore was known as a promising material for the immobilization of radioactive actinide. The samples were prepared from the high purity starling materials under the pressure of 200~400 kg/$\textrm{cm}^2$ at room temperature, and annealed at 1000~ 150$0^{\circ}C$. The Synthesized samples were analysed and indentified with XRD and SEM/EDS methods. The optimal formation condition of Ce-pyrochlore was at 130$0^{\circ}C$ under $O_2$ atmosphere and the chemical composition of it wasCa$Ca_{1-x}Ti_{2-y}O_{7-x-2y}$(x=0.03-0.05, y=0.02~0.04) At temperature between 130$0^{\circ}C$ 140$0^{\circ}C$, Ce-pyrochlore underwent rapidly the incongruent decomposition to perovskite. Ce-perovskite, a partial solid solution between perovskite and loparite (C $e_{0.66}$Ti $O_3$), was observed as a major phase above 140$0^{\circ}C$.>.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.566-571
• /
• 2010

This paper describes the sorption behaviors of aqueous uranium ions on the K-birnessite. K-birnessite was synthesized by adding a concentrated HCl to an aqueous solution of $KMnO_4$. Physicochemical characteristics of the K-birnessite, such as structure, specific surface area and surface charge, were investigated. K-birnessite is a layered material and the $K^+$ ions exist in the interlayer of layered K-birnessite. BET specific surface area of the K-birnessite was 38.30 m2/g. The surface charge of K-birnessite was $-1.65\;C/m^2$ at pH 5.00 and ionic strength of 0.010 M $NaClO_4$, at which the sorption experiments of uranium ions were carried out. Uranium ions were incorporated into the interlayer of the K-birnessite by cation-exchange reaction with $K^+$ ions, and the distribution coefficient is quite similar to those of common ion-exchange materials. The results might be applicable in the retardation of migration of radioactive materials from the underground disposal site of high-level radioactive waste.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.148-154
• /
• 2007

This study investigated the spatial distribution of the marine debris in Jinudo in the Nakdong river estuary. Types of marine debris in Jinudo are analyzed through sampling around some portion of its sandbar shoreline. The present study and its main results are summarized as follow: 1) Monitoring system, for evaluating the volume of marine debris, was established in the coastal region of $50\;m\;{\times}\;50\;m\;(=0.002\;km^2)$ over the southern part of Jinudo. All the marine debris of conceivable form are collected and their amount was also estimated. 2) During the $1^{st}$ collection in May 2007, the total weight of the marine debris was 1,110 kg in this site, which means the density of marine debris around the shoreline is $444\;ton/km^2$. After one month later, the collected marine debris was 23.75 kg and so we have the average density of $9.5\;ton/km^2$. From these results, it is suggested that the marine debris of 316.67kg was being accumulated per day over unit area($1\;km^2$). 3) The most frequent marine debris collected during monitoring campaigns was wooden material amounting to 85.86% of the whole collection; the rest were fishing gears such as nets and buoys(5.13%), household waste(2.34%), glass(0.94%) and metals(0.27%).

• Korean Journal of Environmental Agriculture
• /
• v.20 no.3
• /
• pp.135-142
• /
• 2001

Compostable household wastes(mainly food wastes), after waste papers and cardboard being removed, were daily fed into small bins and mixed thoroughly while the air was supplied into the bin. Three small bins were employed: in case I, only recycled compost was composted, after being once fed at the beginning of composting, in case II, compostable household wastes(less than 50 mm) torn roughly by the hands with recycled compost, and in case III, compostable household wastes(less than 2 mm) ground by a kitchen mixer for vegetables with recycled compost. The straight-line was maintained between the wet or the dry residual mass of composting mixture versus composting time date(the coefficient of determination $R^2{\geq}0.98$ for the wet and $R^2{\geq}0.90$ for the dry). The decomposition rate of each composted material was estimated during composting. The total weight reduction rate after 30 days was 67.86% and 66.14% for case II and III, respectively. For case II, the daily weight reduction 6.82% and the daily decomposition rate 8.81% with the composting mixture, but the daily weight reduction rate was 56.43% and the daily decomposition rate 19.26% with only compostable household wastes. For case III, the daily reduction rate was 6.93% and the daily decomposition rate 7.70% with the composting mixture, but the daily weight reduction rate was 53.30% and the daily decomposition rate 22.95% with only compostable household wastes. The physicochemical characteristics of composting mixture did not show much difference between case II and III as was expected.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.132-139
• /
• 2017

A huge amount of de-icing agent is sprayed during winter to promote traffic safety in cold regions, and the quantity of de-icing agent sprayed has increased each year. The main ingredients in commonly used de-icing agents are chlorides, such as calcium chloride($CaCl_2$) and sodium chloride(NaCl). While calcium chloride is mostly used in Korea and sodium chloride is usually used in the U.S. and Japan, all de-icing agents include chloride ions. The chlorides included in sprayed calcium chloride-based de-icing agents have severe adverse effects, including the corrosion of reinforcing steels through salt damage by infiltrating into road structures, reduced structural performance of pavement or damage to bridge structures, and surface scaling, in combination with freezing damage in winter, as well as water pollution. In addition, the deterioration of paved concrete road surface that occurs after the use of calcium chloride-based de-icing agent accelerates the development of visual problems with traffic structures. Therefore, the present study was performed to prepare an environment-friendly liquid de-icing agent through a reaction between waste organic acids and calcium-based by-products, which are industrial by-products, and to analyze the properties of the de-icing agent in order to evaluate its applicability to road facilities.

• Clean Technology
• /
• v.8 no.3
• /
• pp.119-128
• /
• 2002

In the present study the membrane filtration characteristics of a commercially available synthetic water-based cutting oil through two kinds of ultrafiltration membranes (HF1-45-CM50 and HF1-43-CM100) with molecular weight cut-offs of 50,000 and 100,000, respectively, have been investigated in detail. Among these membranes, the hydrophilic one (HF1-45-CM50) was found to show a satisfactory result for both the permeate flux and the permeability of oil components, whereas the permeate flux obtained with the hydrophobic membrane (HF1-43-CM100) appears to be significantly low, indicating that synthetic cutting oil was easily wetted on the hydrophobic membrane surface and induced more membrane fouling. The effect of material characteristics of the membrane on the filtration characteristics was found to be much more significant compared with the mean pore size of the membrane. Backflushing by nitrogen gas was applied to reduce the formation of a gel layer and membrane fouling. With the hydrophilic membrane, the backflushing was found to increase the permeate flux, whereas the backflushing resulted in a decrease in flux for the hydrophobic membrane. The flux recovery was observed to be highest when the membranes fouled with waste synthetic cutting oil were immersed into a cleaning solution for more than 72 hours and then backflushed by nitrogen gas.

• Clean Technology
• /
• v.26 no.2
• /
• pp.91-95
• /
• 2020

A new eco-friendly synthetic method for N-hydroxysuccinimide (NHS), widely used in the pharmaceutical and fine chemical industries, is developed. Conventional synthesis method yields NHS of about 70% after its reaction with NH₂OH to succinic acid. In this method, NHS can be obtained using low-cost succinic acid, but a great deal of solvents are required as an extraction method to purify NHS, while the work-up process is complicated, resulting in low yield. In addition, there is a safety risk due to the high reaction temperature for commercial production, and it is not economical due to the high cost of production from the generation of much waste because of an acid catalyst and the use of various solvents. In order to make up for this shortcoming, this study used succinic anhydride as a raw material under low temperature reaction and developed a new eco-friendly industrial synthesis method using isobutyl alcohol for a single solvent and non-catalytic reaction. The economic evaluation confirms that there is a cost reduction effect of about 20%. In the future, based on this result, studies may establish a commercial production technology through scale-up research and proceed with foreign technology transfer.