• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.155-162
• /
• 2017

Purpose: The objective of this study was to evaluate the biogas productivity of agricultural by-products (ABPs) based on their proximate composition. Specifically, the effects of proximate composition were investigated, and a new mixing method was developed using various ABPs that are difficult to digest for biogas production. Methods: Experiments were conducted to compare the biogas productivity between a single ABP and a mixture of ABPs that had the same proximate composition as the single ABP. To match the proximate compositions of radish waste and corn distiller's dried grains with solubles (DDGS), mixed ABPs were made from various ABPs. Biogas potential tests (BMP tests) were performed at an organic loading rate (OLR) of 2.5 g VS/L and a feed to microorganism ratio (F/M) of 0.5 under the mesophilic condition. Results: The individual ABPs (radish and corn DDGS) and the mixed ABPs (cabbage waste with skim milk waste, bean-curd waste with skim milk waste, and some others) produced similar amounts of biogas. Conclusions: The new mixing method based on proximate composition can be applied to other ABPs and organic wastes from factories and municipal waste treatment plants to develop renewable energy and effective waste treatment methods.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.521-531
• /
• 1989

The dependence of the chemical durability of simulated waste glasses containing the simplified waste similar to the SRP waste on compositions of host glasses, amounts of waste loading, and kinds of leachants has been investigated as a basic study on the waste immobilization through vitrification. The maximum limit of the amount of waste loading for glassforming with the host sodium borosilicate glasses selected in this study was 50wt%. The chemical durability of waste glasses whose host glass belonged to the immiscible composition region was much higher than that of waste glasses whose host glass belonged to the miscible composition region. The former waste glass showed lower chemical durability in deionized and silicate waters than in brine, while the latter glass showed the lowest chemical durability in deionized and silicate waters than in brine, while the latter glass showed the lowest chemical durability in silicate water. It was also observed that the total leaching rates in brine were noticeably small in comparison with those in other solutions. The composition of the host borosilicate glass which was suitable for the treatment of the waste through vitrification was found to be 25 Na2O-5B2O3-70SiO2(wt.%).

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.92-102
• /
• 2015

Current plans for legacy nuclear wastes stored in underground tanks at the U.S. Department of Energy's Hanford Site in Washington are that they will be separated into high-level waste and low-activity waste fractions that will be vitrified separately. Formulating optimized glass compositions that maximize the waste loading in glass is critical for successful and economical treatment and immobilization of these nuclear wastes. Glass property-composition models have been developed and applied to formulate glass compositions for various objectives for the past several decades. Property models with associated uncertainties combined with composition and property constraints have been used to develop preliminary glass formulation algorithms designed for vitrification process control and waste-form qualification at the planned waste vitrification plant. This paper provides an overview of the current status of glass property-composition models, constraints applicable to Hanford waste vitrification, and glass formulation approaches that have been developed for vitrification of hazardous and highly radioactive wastes stored at the Hanford Site.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.5
• /
• pp.259-266
• /
• 1995

In order to manufacture an attractive waste glass for the permanent and secure disposal of high-level radioactive waste, the complex composition of the simulated nuclear waste glass PNL-7668 was simplified to a composition of sodium borosilicate glass. The substitutions of $Fe_2O_3$ and $Al_2O_3$ were added to examine on the leaching characteristics of simulated nuclear waste glass with variable composition. The leach tests for these glasses were performed according to 'MCC-1, Static Leach Test Procedure' in acid and basic solution. In this study, for the $Al_2O_3$-containing glasses, Na ion release from these glasses was higher in acid solution than in basic solution. As the content of $Fe_2O_3$ was increased in glasses, Na ion release was increased in acid solution, in spite of decrease of amount of total mass diminution.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.29-34
• /
• 1995

This study was on the characteristics and heating values analysis of municipal solid wastes according to the volume- rate garbage collection system in Busan. Each waste sample was analyzed to obtain physical composition, proximate analysis, heating value, chemical composition. And the heating value were compared with those of the past waste collection system. The average physical composition of A.P.T. area was food waste 54.0~65.7% , while that of common residence was food waste 57.9~61.2% . The density of solid waste were largely different for site and the highest densities of waste was $399.6kg/m^{3}$ from Market. The low heating value of waste from residence site was 996.9kca1/kg~1, 238.1 kcal/kg which was lower than 1, 000kcal/kg~1, 800kca1/kg of the past wastes. These difference was mainly due to the difference of moisture content and the amount of vegetables.

• Journal of Environmental Science International
• /
• v.17 no.4
• /
• pp.397-403
• /
• 2008

The purpose of this study is to investigate weighted compaction density according to a leading density in truck, a compaction density of solid waste and composition ratios of solid waste fur calculation of a capacity of the landfill sites. The experiments for calculations of in-place density at landfill site have been conducted in S landfill site at B City. The size of vessel for measuring the compaction density was $1m^3(1m{\times}1m{\times}1m)$. The experiment tests have been carried out methods (1 time for bulldozer and 4 times for compactor) that do contain all of specification at the landfill site. Average of the loading density at the landfill site was $0.264\;ton/m^3$ ($0.113{\sim}0.487\;ton/m^3$). When the loading density for each compositions was compared, the composition of the highest average loading density ($0.474\;ton/m^3$) was miscellaneous wastes. The composition of the lowest average loading density ($0.120 ton/m^3$) was general solid waste. The reported results indicated that the compaction density at the landfill site was $0.538\;ton/m^3$, which was calculated with weighted incoming ratios of compositions. The ranges of the density for each composition were from $0.021\;ton/m^3$ to $0.221\;ton/m^3$. When the compaction density for each composition was compared, the composition with the highest average compaction density ($0.221\;ton/m^3$) was miscellaneous wastes. The composition with the lowest average compaction density ($0.021\;ton/m^3$) was general solid wastes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.63-70
• /
• 2005

As the landfill ban of food waste has enforced since 2005, the composition of municipal solid waste(MSW) has changed dramatically. In this 2 year study, MSW in a small city has collected 3 times at 10 different generating points, and physico-chemical analysis has done. From the result, the effect of landfill ban of food waste on the physico-chemical properties of MSW was described. Landfill ban of food waste has reduced by 12 weight % in the composition of food waste in MSW, and has reduced by 25 % of bulk density. After landfill ban of food waste, water content of MSW has reduced to 32.3%, which is reduced by 14.1 % of water content of year 2004 data. Low heating value of MSW after landfill ban was 2991.4kcal/kg, which has increased 32% than that of year 2004 data. From landfill gas generation modeling, it is estimated that the yearly generation rate of landfill gas will be reduced by 5% than in case of accepting food waste into the landfill.

• Journal of the Korean Dietetic Association
• /
• v.3 no.1
• /
• pp.55-62
• /
• 1997

The waste rates of 98 food items after pre-preparation were surveyed to provide database for good menu planning. The waste rates turned out 0-64.27% in vegetables, 6.38-7.03% in potatoes, 6.25-68.75% in fishes and shellfishes, 16.61% in eggs, and 16.00-56.84% in fruits. Foods with high waste rates were vegetables, fishes and shellfishes. Survey results were compared with other food composition tables. Foods with 30% higher waste rate than other food composition tables were squash leaf, pacific ocean perch, sweet potato stalk, water cress, green peas, alaska pollack, bluefin tuna, beka squid, crown daisy, dodok, amaranth, beef ribs. Food which waste rates turned out to be decreased by about 30% in this study were corb shell, pomfret, sea mussel, warty sea squirt. For the menu planning, reasonaly exact waste rates for each food items are essential. Since survey results show significant deviations, there should be more studies for exact waste rates for each food.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.222-228
• /
• 2008

The chemical composition and thermal, crystal characterization of oak mushroom waste were investigated in comparison with those normal oak wood for utilization of cellulose from oak mushroom waste. The oak mushroom waste contained a higher percentage of ash, and hot water extractives than oak wood. This results indicated that the materials inside the body are easily decomposed during the oak mushroom cultivation. The lower percentage of holocellulose and a-cellulose of oak mushroom waste caused by fungal decomposition too. Whereas, the thermal decomposition behavior and crystallinity of oak mushroom waste was similar to that of normal oak wood, which indicated that the cellulose characterization of oak mushroom waste is resistant to fungal decomposition. In additionally, a degree of polymerization of oak mushroom waste must be investigate for examination of cellulose crystalline characterization, especially.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.1
• /
• pp.8-14
• /
• 1978

In order to determine the feeding value of t:1e waste wood of Lentinus eddodes, the waste wood was milled and treated with $Ca(OH)_2$ and cellulase, then raw waste wood and the treated waste wood were fed to broiler chicken and Korean native goates. The results obtained were as follows; 1. The chemical composition of the waste wood was c. protein 2.26%. c. fat 2.57%. c. fiber 44.60 and c. ash 5.58%. No differences were detected between the raw waste wood and $Ca(OH)_2$ or cellulase treated waste wood in chemical composition. 2. In amino acid composition. no cystine and methionine was showed, but trace amount of Vitamin A, $B_1$, and $B_2$, and cholin chloride were detected. 3. Trichoderma viride SANK. No. 16374 was used to decompose the cellulose. 4. In broiler performance, when waste wood meal was subsituted for 5% wheat bran, no adverse effect was showed on weight gain, feed in take and feed efficiency. But $Ca(OH)_2$ and cellulase treated waste wood meal could be subsituted for 8% wheat bran. 5. In Korean native goat performance, feeding waste wood meal subsituted by 50% various bran (25% defatted rice bran and 25% barley bran) had no adverse effect on growth and feed efficiency. 6. Considering the above results, though the waste wood meal could be replaced to part of various bran, there was a bottle-neck to process the waste wood. The waste wood of Lentinus edodes was little feeding value on bed of ruminant.