• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.140-149
• /
• 2016

All pesticides must be assessed strictly whether safe or not when agricultural operators are exposed to the pesticides in farmland. A pesticide is commonly regarded as safe when estimated dermal absorption amount is lower than the acceptable operator's exposure level (AOEL). In this study, dermal absorption rate of chlorpyrifos, a widely used organophosphate insecticide, was investigated using rat dermal tissue model. Chlorpyrifos wettable powder solved in water (250, 500 and 2,500 ppm) was applied to freshly excised rat dermal slices ($341{\sim}413{\mu}m$ thickness) on static Franz diffusion cells at $32^{\circ}C$ for 6 hours. After exposure period of 6 hours, and then washing-at residual amount of chlorpyrifos was analyzed in dermal tissues, tape strips, washing solution, washing swabs of receptor bottles and receptor fluids at 1, 2, 4, 8 and 24 hours. Chlorpyrifos was only detected in dermal tissue but not found in receptor fluid at each concentration and time point, and the absorption rate of 250, 500 and 2,500 ppm was 2.36%, 1.96% and 1.69%, respectively. The estimated exposure level of chlorpyrifos was calculated as 0.012 mg/kg bw/day. The health risk for farmers in this condition is a level of concern because the estimated exposure level is 12 times higher than AOEL 0.001 mg/kg bw/day. However, actual health risk will be alleviated than estimated because absorbed chlorpyrifos is not permeated into internal body system and only retained in skin layer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.2
• /
• pp.75-84
• /
• 1985

In order to improve dyeing and finishing technology of thin cloth of microfiber(super-fine fiber), the degrees of deep dyeing method, the light fastness, and the washing fastness were investiagted. 1. The thin cloth made of microfiber, $0.15^d\~0.2^d$, was conjugated type and the dyeing degree was lower at 5 to $10\%$ than that of cloth made of common fiber. The cloth of excellent dyeing fastness, light fastness, was developed by increasing the concentration of dye of high quality up to $5\~10\%$. 2. Because refractory rate of microfiber of $0.2^d$ was lower than that of $0.01^d$, the surface refractory rate of $0.2^d$ was lower than that of $0.01^d$ fiber. Therefore the surface of micro-fiber, $0.2^d$, was more rougher than that of $0.01^d$ and it belongs to separate type. 3. The higher degree of dyeing was increased by using dye of microparticle. Also the degree of textile printing was increased by adding urea solution ($20\%$) and glycerine diethylene glycol. 4. Light fastness was very excellent, marked 5 grade. However, washing fastness was 2$\~$3 grade. After dyeing, we could improve to 4 grade, through hot water washing including some organic chlorine solvent. 5. Super microfiber of $0.01^d$ will not be dyed by present dye and dyeing equipment, because right reflection light rate(white light) of fiber surface was too high and the more refraction rate higher the more surface refraction rate will be increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.5
• /
• pp.533-540
• /
• 2016

This study assessed the risk of an oyster-shucking site to establish the hazard analysis critical control point (HACCP) system model by measuring viable cell counts, coliform group Staphylococcus aureus foreign material on oysters, oyster-producing equipment, and washing water. The viable cell count and coliform group levels of the harvested raw oysters were 4.00 log CFU/g and 1.1×10² MPN/100 g, while those of washed oysters were 2.99 log CFU/g and (3.2−4.6) × 10 MPN/100 g, respectively. After washing the oysters, no Escherichia coli or pathogenic bacteria (E. coli O157:H7, Listeria monocytogenes, S. aureus, Salmonella spp., Vibrio parahaemolyticus, and Clostridium perfringens) were detected. Regardless of the location of foreign matter, up to 100% more metallic and non-metallic foreign matter was detected at 1.5 mmΦ than at 3.5 mmΦ, using a metal detector with increased sensitivity. According to the results, the critical control points (CCP) are the washing and metal-detection processes. These results can be used as basic data to improve sanitation at oyster-shucking sites in factories with an HACCP system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.511-517
• /
• 1993

Changes of the surface and interface tension with temperature for washing liquids and alkanes were measured by FACE surface tensiometer. Using the extended Fowkes' equation, the dispersion and polar force components of the surface tension were estimated. The results were as follows : 1. The surface tensions of washing liquids and alkanes decreased almost linearly with the increase of temperature. 2. The interface tensions of 0.25% DBS/alkane increased slowly with the increase of temperature. In the case of nonionic surfactant solutions, however, the interface tensions with alkanes varied with the number of hydrophilic ethylene oxide(EO) groups. 3. Of the surface tension of water at $20^{\circ}C$, the dispersion force component was 25.3 dyn/cm and the polar force component was 47.8 dyn/cm. As the temperature increased, both the polar and dispersion force components decreased in a similar fashion. 4. The dispersion force component of surface tension of 0.25% DBS solution was 30.0 dyn/cm, and the polar force component was 2.2 dyn/cm at $20^{\circ}C$. The two components decreased with the increase of temperature. 5. As the temperature increased, the dispersion force component of surface tension decreased and the polar force component increased significantly for 0.25% NPPG-7.5EO solution. In the case of 025% NPPG-10EO, both the dispersion and polar force components decreased slowly, but the polar force component is expected to increase from $60^{\circ}C$. However, the polar force component of surface tension decreased with the increase of temperature for 025% NPPG-15EO solution, and at the temperature higher than $60^{\circ}C$ the surface tension is expected to be composed of only dispersion force component.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1125-1130
• /
• 1997

The effects of enzyme combination, pH, acid washing and enzyme treatment sequence were investigated in the hydrolysis of soy protein. Comparing Alcalase vs. Neutrase/Alcalase, it appeared that Neutrase/Alcalase was more efficient than Alcalase alone, as the highest degree of hydrolysis (DH) was seen in Neutrase/Alcalase. A surprisingly high DH (more than 60%) was observed with Flavourzyme in the second hydrolysis. The separation of insolubles from the first hydrolysis had little effect on the second hydrolysis. When the washing water from the first hydrolysis was reused in the next hydrolysis, the DH and protein recovery were increased. The addition of calcium ion showed not so much positive effects by the stabilization of Neutrase on the Protein hydrolysis. The use of carbohydrase and repeated acid washing gave positive effects on DH. The simultaneous treatment using endoprotease and exoprotease with pH adjustment improved DH significantly.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.6
• /
• pp.77-86
• /
• 2022

Various odor reduction systems are being operated at pig houses to improve livestock odor issues. However, the quantitative evaluation of odor reduction efficiency is not sufficiently conducted. The analysis of factors that affect the reduction efficiency also has not been sufficiently conducted. Therefore, in this study, the reduction efficiency of representative odor reduction facilities (bio-curtain, scrubber) operated by domestic pig houses was evaluated. The odor reduction efficiency was evaluated by sampling the air before and after the odor reduction facility in 6 pig houses. Livestock odors were evaluated for complex odors, ammonia, hydrogen sulfide, and VOC. To find factors for reduction efficiency, temperature, humidity, pH of washing resolution, type of washing water, and ventilation rate was measured. As a result, it was found that the scrubber system had the highest reduction efficiency. The reduction efficiency was found to be affected by the scrubber's washing resolution, filler, operating conditions, and size. Bio-curtains may have problems such as deterioration of fan performance due to ventilation fan load, groundwater pollution, and excessive use of groundwater.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.127-130
• /
• 2002

섬유공업에서 섬유원료단계의 세정을 출발로 실 및 직물제조 단계를 거쳐 제조된 직물의 가호, 탈호, 정련ㆍ표백, 염색ㆍ가공 공정 등의 모든 공정에 수세공정이 포함되어 있다. 이러한 공정에는 많은 양의 물이 사용될 뿐만 아니라 환경 오염의 원인이 되는 약제들 또한 다량 사용되므로, 섬유공업의 발전 초기단계부터 부수적으로 발생되는 환경 폐수를 줄이거나, 오염 물질의 발생을 유발하지 않는 방법에 대하여 활발한 연구가 이루어져 왔으나 현재까지도 크게 실효를 거두지 못하고 있다. (중략)

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.735-738
• /
• 2009

본 연구분석은 세면대에서 사용한 세면수를 화장실 변기의 세정수로 재활용 할 수 있도록 하는 절수식 일체형 세면대와 양변기 기술에 대한 특허분석으로, 국내외의 특허 동향을 파악하고자 함과 관련사의 기술동향 및 핵심특허 분석을 통하여 연구개발 방향을 설정 점검하고, 기술추이 및 사업성 검토, 연구개발 예산의 효율적 기초자료로 활용하고자 함이다.

• Journal of the Korean Professional Engineers Association
• /
• v.41 no.3
• /
• pp.24-29
• /
• 2008

Recently, the serious problems have been occurred due to the contaminated sites with heavy metals are increasing. There are several remediation technologies of the metal contaminated soil such as physical separation, washing with water or acid, biologically, electrically. Pytoremediation, ultrasonic etc. Among these technologies the physical separation can be put in a good option to solve the metal contaminated soil economically and environmental friendly. Because this technology has been already commercially certificated in the mineral processing field for a long time.