• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.1-13
• /
• 1995

In order to investigate the effect of liquid balancer in washing machine, we identify the vibration characteristics of suspension system of washing machine and formulate the 4 D. O. F. system dynamic equations. As the washing machine rotates higher speed, it is emphasized to reduce the ecentric force due to unbalanced mass. Nowadays, the most effective cancelling method of eccentric force is known as the usage of liquid balancer. To determine the liquid distribution in liquid balancer, the fluid statics is considered. The system dynamic equations are solved by Runge-Kutta method and represent the good characteristics of real washing machine in X-Y plane. The accuracy of the numerical solution was examined by experiments. The simulation results show that the unbalanced mass has so much influence on vibration magnitude and the rotating shape of spin-basket. But the effect of mass reduction due to the dehydration of the spin-basket has little influence on transient vibration.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.3-9
• /
• 2009

When washing machine is rotated in the laundry, it tends to lean toward one side. This tendency causes a serious vibration. The balance of washing machine plays an important role in order to reduce the vibration by injecting the sand or the salt water into the balance of washing machine. The hot plate welder is used to prevent from outflow of contents. The hot plate welder brings about many problems which is concerned with accidents. The direction recognition and location information of the balance are required in this system. In this paper, the recognition direction of balance in washing machine using machine vision system is studied. The template matching algorithm compares sub-image with original image acquired in real-time to obtain a center point of balance image. The mid points and the edges of balance are estimated by the edge detection and gauging algorithms. The data acquired by these results is used for recognition direction of balance. The automation software for image processing is developed by using LabVIEW.

• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.131-143
• /
• 2011

The purpose of this study was to investigate i) the current state of washing knowledge and washing habits ii) the effect of washing behaviors on washing satisfaction. A survey questionnaire was developed and implemented to married women in their 30's or 40's. A total of 210 responses were analyzed by frequency analysis, t-test and ANOVA with PASW18.0. The results are as follows. First, the ways in which women do the laundry was analyzed. Married women in their 30s and 40s usually do the laundry at home and are familiar with washing symbols and do not rely on common sense. Most of them like to rely on the washing machine guidelines for detergent concentration and use the right amount for environmental protection. They also adjust the washing machine setting effectively considering laundry time, water temperature and care label. Second, the groups divided by demographic variables showed meaningful results about washing knowledge. Particularly, there is no significant difference on washing knowledge between housewives and career women. Third, the groups divided by the levels of washing habits showed suggestive results about washing satisfaction. The groups who have correct washing habits generally a indicated high degree of washing satisfaction. Finally, marketing implications for the businesses of laundry, laundromat and the manufacturers of washing machine are suggested.

• 연구논문집
• /
• 통권30호
• /
• pp.59-65
• /
• 2000

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry)to high_speed flow characteristics within Ginseng washing machine. Three different kinds of flow rate(15,20,27 $\ell$/min)are selected as experimental conditions. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. Instantaneous velocity distribution, time-mean velocity distribution and velocity profiles are represented quantitatively at the full-scale region for the deeper understanding of the flow characteristics in Ginseng washing machine.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1048-1061
• /
• 1996

The most important practical feature that represents the performance of a washing machine is its ability to remove stains or soils from clothes. There are various tests to measure a washing machine's ability to remove stains or soils from clothes. The results of these tests are dependent upon the kind of soiled fabrics used. Moreover, these results may reflect some aspects of the effectiveness of a washing machine in cleaning clothes due to the paritcular compositions of chemicals which comprise soils in soiled fabrics and the particular conditions in which the results are evaluated. After selecting factors presumed to have a major effect on the cleaning ability of a washing machine and choosing most widely used soiled fabrics, we use experimetal statistics methods to screen real factors from them that influence the cleaning ability of a washing machine in a statistically significant manner for each soiled fabric. Using the least number of experimental rules required to extract the necessary information, we then proceed to present the study on the relations between the sets of selected factors and the soiled fabrics. We would then suggest which soiled fabrics is the best for evaluating the performance in cleaning clothes of a washing machine based on the above study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1849-1852
• /
• 2005

An automatic cap-washing machine is developed for rinse and dry of synthetic resin cap which is used in spring water bottle. This machine should be achieved all processes washing and drying, array, transfer automatically. A cap is washed by an ozonized water and pure water first. Next, a cap is dried by a hot wind drying equipment. In this paper, structural and modal analysis for the cap-washing machine is carried out to check the design criterion of the machine. The analysis is carried out by FEM simulation using the commercial software, CATIA V5. And a fictitious mass properties was used for the analysis of the machine. Finally, the machine performance is shown to be satisfactory.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.88-92
• /
• 2019

Automotive industry requires high technologies to stabilize apparatuses for the EGR valve manufacturing. Vibrations of washing machine are one of the most critical factors for causing unwashed products, which are the main reasons of the defects.In this study, the structure of the washing machine was analyzed through the experiment and the computer simulation to investigate the main reasons of the vibrations, and further to alter the design for the improved stability. And the design alterations were applied to the machine to identify the effects of those alterations.The result of the study shows that design alterations of the washing machine can effectively suppress about 85% of the vibrations, and further can minimize the unwashed EGR valve.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.389-397
• /
• 2010

This study was carried out to investigate the effect of washing machine type (drum or pulsator) on the behavior of clothing management and consumer satisfaction. The data were collected via questionnaires from 408 consumers and were analyzed through factor analysis, ANOVA, Cronbach's Alpha, utilizing SPSS 10.0. The results of this study were as follows: 1) 39.2% of consumers used drum washer and the number of users has increased sharply in five years. Drum washer consumers hold larger capacity washer than pulsator washer consumers. 2) Young people(under 40) showed statistically significant differences in terms of washing concern and the kinds of detergents, while old people(40 and above) showed statistically significant differences in terms of checking the label, preparing the laundry, and hand-washing. Married women showed statistically significant differences in checking the label, preparing the laundry, and hand-washing. 3) In terms of clothing management behavior with the type of washing machine, drum washer consumers showed statistically significant the amount of detergents, while pulsator washer consumers showed statistically significant handwashing and kinds of detergents. 4) In terms of customer satisfaction with the type of washing machine, drum washer consumers showed statistically significant brand satisfaction.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.207-217
• /
• 2000

A new, high-efficiency ultrasonic fabric washing machine was developed to be an energy-efficient washing machine and to enhance fabric washing quality in washing processes of the dyeing and finishing process in the textile industry. This system is composed of ultrasonic wave generator, air blowing nozzle, torque motor for fabric tension control, and enclosed washing bath, multi-tube type exchanger, noiseless heater, air cylinder, expander roller, mangle upper and lower rollers, bend bar, dancer, shower spray nozzle, and solenoid valve, and so on. These elements are synergised for fabric washing. One of the very important principles is the low tension fabric running system. For an efficient washing effect, a counter flow system is also adopted. The new system also adopts the dancer and torque motor to control fabric tension and prevent fabric creasing. Shower spray nozzle, counter flow and overflow apparatus, and air-blowing apparatus are adopted to enhance the fabric washing effect. In this study, peach yoryu, exter, and moss crepe fabrics were washed by the general and ultrasonic washing systems under different conditions respectively. The washing efficiency was affected by the fabric running speed and characteristics of fabrics. Size content after washing increased with increasing the fabric running speed. The values in the general washing system were higher than those of the ultrasonic washing system. The changes of conductivity in the ultrasonic and the cooling bath were affected by the running time under the ultrasonic generating. The values of conductivity decreased as the experimental time passed.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1589-1597
• /
• 2006

Nowadays, Korean consumers prefer drum-type washing machines to pulsator-type washers. Washing is a complex process involving the interaction of numerous physical and chemical influences. The main factors in the washing operations are the washing chemistry of the detergent along with the mechanical input, the wash temperature, and the time provided by the washing machine. Heavy-duty detergents that are used in drum-type washing machines contain different components from those used in vertical-axis washing machines. The bath ratio and the mechanical actions to which laundry is subjected are different between the drum-type and the vertical-axis washing machines. In this study we examined the effects of wash temperature, wash time, detergent concentration, and revolution speed on the removal of soils from artificially soiled cloths in a drum-type washing machine with heavy-duty commercial detergent. We used multiple regression analyses to find the relative importance of the factors and the optimum washing conditions. The results of these experiments showed that the washing temperature was the most important factor in the effective removal of most soils. This was followed by the washing time, the detergent concentration, and finally the revolution speed. In this study it was found that superfluous amounts of detergent did not sufficiently increase the soil removal rate. Koreans who are used to washing with cold water should increase the wash time to launder more efficiently.