• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.94-100
• /
• 2019

This study was conducted on a high-temperature/high-pressure washer in which low-pressure cold water in a boiler is heated to a temperature range of $70{\sim}80^{\circ}C$ by supplying diesel combustion heat. The high-temperature water is sent to a compressor to increase its pressure to 200 bar, thereby making high-temperature/high-pressure water, which is sprayed through a spray nozzle. In the results of this study, the spray temperature of the high-pressure washing was shown to be the highest when the ratio between the actual amount of combustible air and the theoretical amount of air was 1:1 and the energy consumption rate of the low-pressure boiler type high-pressure washer was shown to be much lower than that of the high-pressure boiler type high-pressure washer.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1997.12a
• /
• pp.135-140
• /
• 1997

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.40-44
• /
• 2015

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06a
• /
• pp.85-89
• /
• 1996

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.416-421
• /
• 2000

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.74-78
• /
• 1991

Conventional compression bone fracture plates sometimes cause osteoporosis under the plate due to their high rigidity which in turn transfer physiological load mostly through the plates and screws. In order to prevent the osteopenia we have designed a system which have a viscoelastic washer between plate and screw head. The washer is made of a biocompatible ploymer (untra high molecular weight polyethylene, UHMWPE). Three-dimensional finite element meshes of the human femur with the conventional and new concept bone plate ere generated and the comparative stress analyses are performed with static half-stance loading condition. The results of analyses showed that could reduce the stress shielding effect compared with the conventional plate.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.37-41
• /
• 2012

Usually compound dies are used in clinch washer production. However, in this study, a fine blanking die is designed and manufactured, and clinch washers are produced by the die. Clinch washers are for electric exhaust gas recirculation (EEGR) and they recirculate some of exhaust gas to reduce harmful substances. Fine blanking automation production eliminates difficulties operators face on conventional press.

• Tribology and Lubricants
• /
• v.3 no.1
• /
• pp.26-30
• /
• 1987

The effects of high viscosity polybutene lubricant on the asperity contacts between a flat washer and a ball were tested using three balls/two flat washers rotational apparatus. The asperity contacts were dependent on the ratio of EHD flim thickness (h) and surface roughness($\sigma$). The viscosity-pressure coefficient of lubricant gave a significant effect on the film thickness and thereby on h/$\sigma$ ratio.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2477-2485
• /
• 1994

Air damper has a great advantage that is independent of temperature change. This paper presents an analysis approach and an application for designing nonviscous air damper with a piston and a cylinder. The objective functions for optimum design is damping coefficient and is maximized by changing two design variables that are length between piston and cylinder and orifice diameter. A digital computer program was developed which determines optimal air damper configuration for maximum damping coefficients. The results were applied to the automatic washer and are confirmed to be valid for the range of operating conditions.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.5-19
• /
• 1988

Finite element scheme to analyze the vibration characteristics of the axisymmetric rotor system is developed. The rotor system of a large washer-extractor is analyzed as an example. Natural frequency obtained by FEM is in good agreement with experimental one by impact test. Also, parametric studies using FEM code developed are carried out for the investigation of the effects of the radii of the axis and the cylinder on the stiffness and the critical speed of the system. Larger radius of the axis makes the system stiffer and increases the critical speed at which the unbalance response has its maximum value. Whereas, the stiffness and the critical speed decrease at first and then increase as the radius of the cylinder increases.