• 한국가구학회지
• /
• 제13권1호
• /
• pp.19-25
• /
• 2002

Modern furniture is mostly made of panel products such as a glue-up panel, a particle board and a medium density fiberboard(MDF). Warping is a major defect of these panel products resulting in degrading final products. In this study the factors related to the warping of a glue-up panel and MDF were investigated by comparing the physical properties of warped specimens with those of the unwarped. The differences between the moisture contents measured on the both surfaces of specimens were found to mainly influence the warping of glue-up panel specimens whether conditioned or not. The average oven-dry density of warped glue-up panel specimens was definitely higher than that of the unwarped at l% significance level. For MDF the influencing factor on warping has not been revealed yet, however it was found that the conditioning reduced the number of warped specimens.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.599-611
• /
• 2006

The theory with hierarchical warping functions had been used to analyze composite thin-walled structure, laminated beam and had good results. In the present paper, a series of hierarchical warping functions are developed to analyze the cylindrical bending problems of composite lamina. These warping functions which refine through-the-thickness variation of displacements were composed of basic and corrective functions by taking into account of anisotropic, material discontinues, and transverse shear and normal strain. Then the hierarchical finite element method was used to form a numerical algorithm. The distribution of the displacements, in-plane stresses, transverse shear stresses and transverse normal stress for composite laminate were analyzed with the present model. The results show that the present model has precise mechanical response compared with the first deformation transverse theory and the corrective order affects the accuracy of result.

• 산업기술연구
• /
• 제20권B호
• /
• pp.219-226
• /
• 2000

In this paper, we propose a new novel method for similarity search that supports time warping. Our primary goal is to innovate on search performance in large databases without false dismissal. To attain this goal, we devise a new distance function $D_{tw-lb}$ that consistently underestimates the time warping distance and also satisfies the triangular inequality. $D_{tw-lb}$ uses a 4-tuple feature vector extracted from each sequence and is invariant to time warping. For efficient processing, we employ a multidimensional index that uses the 4-tuple feature vector as indexing attributes and $D_{tw-lb}$ as a distance function. We prove that our method does not incur false dismissal. To verify the superiority of our method, we perform extensive experiments. The results reveal that our method achieves significant speedup up to 43 times with real-world S&P 500 stock data.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.161-164
• /
• 2000

In this paper, a finite element structural analysis for thin-walled open-section composite beams with elastic couplings has been performed. The analysis includes the effects of transverse shear across beam sections, torsion warping and constrained warping. Reissner's semi-complementary energy functional is used to obtain the beam st illness coefficients The bending and torsion related warpings and the shear correct ion factors are obtained as part of the analysis. The resulting theory describes the beam kinematics in terms of the axial, flap and lag bending, flap and lag shear, torsion and torsion-warping deformations. The static response has been validated against finite element predict ions, closed form solutions, and experimental data for rectangular sol id and I-beams with elastic couplings. The free vibration results are also compared with available literature.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.467-473
• /
• 2017

This paper focuses on the investigation of three-dimensional (3D) warping effect on the stiffness constants of composite beams with closed section profiles. A finite element (FE) cross-sectional analysis is developed based on the Reissner's multifield variational principle. The 3D in-plane and out-of-plane warping displacements, and sectional stresses are approximated as linear functions of generalized sectional stress resultants at the global level and as FE shape functions at the local sectional level. The classical elastic couplings are taken into account which include transverse shear and Poisson deformation effects. A generalized Timoshenko level $6{\times}6$ stiffness matrix is computed for closed section composite beams with and without warping. The effect of neglecting the 3D warping on stiffness constants is shown to be significant indicating large errors as high as 93.3%.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.146-153
• /
• 2005

Structural design of the torsion beam rear suspension is investigated by calculating warping of the torsion beam. Since the longitudinal displacement in the cross section of the torsion beam due to torsional moment causes normal stress across the beam restrained from outside at both ends, the profile of torsion beam needs to be designed considering the warping. Warping function of the beam is derived with the parameters of cross section fur the arbitrary shapes of torsion beam profiles assuming thin-walled open section. From comparing the warping calculated for two different beam profiles, the design method for the torsion beam in the view point of low stress is discussed. It is shown that the gusset used to reinforce the torsion beam can be optimized in accordance with warping shape. The method to fix the end point of the gusset is proposed to minimize the stress concentrated on the end point of the gusset produced during torsional moment. The result from finite element analysis shows the stress is minimized when the height of gusset end point is coincident with the point where warping of the beam is minimized.

• 대한임베디드공학회논문지
• /
• 제9권6호
• /
• pp.335-344
• /
• 2014

As a kind of 2D spatial coordinate transform, image warping is a basic image processing technique utilized in various applications. Though image warping algorithm is composed of relatively simple operations such as memory accesses and computations of weighted average, real-time implementations on embedded vision systems suffer from limited computational power because the simple operations are iterated as many times as the number of pixels. This paper presents a real-time implementation of a look-up table(LUT)-based image warping using an FPGA. In order to ensure sufficient data transfer rate from memories storing mapping LUT and image data, appropriate memory devices are selected by analyzing memory access patterns in an LUT-based image warping using backward mapping. In addition, hardware structure of a parallel and pipelined architecture is proposed for fast computation of bilinear interpolation using fixed-point operations. Accuracy of the implemented hardware is verified using a synthesized test image, and an application to real-time lens distortion correction is exemplified.

• 소성∙가공
• /
• 제29권5호
• /
• pp.282-289
• /
• 2020

Flexible roll forming is an advanced sheet-metal-forming process that allows the production of parts with various cross-sections. During the flexible process, material is subjected to three-dimensional deformation such as transverse bending, inhomogeneous elongations, or contraction. Because of the effects of process variables on the quality of the roll-formed products, the approaches used to investigate the roll-forming process have been largely dependent on experience and trial- and-error methods. Web-warping is one of the major shape defects encountered in flexible roll forming. In this study, an SVR model was developed to predict the web-warping during the flexible roll forming process. In the development of the SVR model, three process parameters, namely the forming-roll speed condition, leveling-roll height, and bend angle were considered as the model inputs, and the web-warping height was used as the response variable for three blank shapes; rectangular, concave, and convex shape. MATLAB software was used to train the SVR model and optimize three hyperparameters (λ, ε, and γ). To evaluate the SVR model performance, the statistical analysis was carried out based on the three indicators: the root-mean-square error, mean absolute error, and relative root-mean-square error.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.111-119
• /
• 2005

철근콘크리트 전단벽 또는 플랜지 구조물의 해석시 비선형으로 인한 거동을 해석하여 파괴거동을 좀더 명확하고 신뢰성있게 예측하고자 하는데 본 연구의 목적이 있다. 콘크리트 응력-변형율 모델로는 Hognestad, Vallenas의 이론을 적용하고, 철근 응력-변형율 모델로는 Ramberg-Osgood 이론을 적용하였으며, 구속(confined) 및 비구속(unconfined)을 고려하여 비선형 해석을 수행하였다. 단면 해석 모델은 Mander가 제안한 층상화 단면해석을 적용하였고, 감마팩터를 고려한 새로운 변형율도를 이용하였다. 이러한 단면에 경계효과를 고려한 Boundary warping과 전단효과를 고려한 Shear warping 및 초기 균열을 고려한 경우(precracked)와 초기 균열이 발생하지 않은 경우(uncracked)로 구분하여 단면 해석을 시행하였다.

• 디지털콘텐츠학회 논문지
• /
• 제16권2호
• /
• pp.235-244
• /
• 2015

본 논문에서는 다양한 디지털 잎을 효율적으로 생성하기 위하여 특징기반 워핑을 활용한 잎 모델링 방법을 제시한다. 제안하는 방법은 다수의 다양한 잎의 형상을 쉽고 직관적으로 제어하고 이를 통해 자연스러운 잎맥 패턴을 효과적으로 성장할 수 있도록 영상처리 응용 기술 중 하나인 워핑 방법을 활용한다. 먼저 잎몸 영상으로부터 잎몸의 형상을 판단할 수 있는 근사화된 컨투어 정보를 찾고, 이를 기반으로 특징기반 워핑에 사용되는 제어선을 자동으로 계산한다. 다음으로 제어선기반 워핑을 통해 잎몸 영상을 직관적으로 변형함으로써 다양한 형상을 갖는 잎을 자동으로 생성할 수 있다. 그리고 변형된 잎몸 영상의 컨투어 정보들로부터 컨투어기반 잎맥 성장 알고리즘을 적용하여 자연스러운 잎맥 패턴을 생성한다. 본 논문에서는 잎몸에 해당하는 샘플 이진영상 한 장을 사용하여 식물을 구성하는 다양한 형상의 잎을 효율적으로 생성 가능한지 여부를 실험을 통해 입증한다. 또한 워핑을 잎몸의 성장에 적용하여 잎의 자연스러운 성장을 표현할 수 있음을 확인한다.