• Smart Structures and Systems
• /
• v.23 no.2
• /
• pp.107-122
• /
• 2019

As one of the most important parameters in structural health monitoring, structural frequency has many advantages, such as convenient to be measured, high precision, and insensitive to noise. In addition, frequency-change-ratio based method had been validated to have the ability to identify the damage occurrence and location. However, building a precise enough finite elemental model (FEM) for the test structure is still a huge challenge for this frequency-change-ratio based damage detection technique. In order to overcome this disadvantage and extend the application for frequencies in structural health monitoring area, a novel method was developed in this paper by combining the cross-model cross-mode (CMCM) model updating algorithm with the frequency-change-ratio based method. At first, assuming the physical parameters, including the element mass and stiffness, of the test structure had been known with a certain value, then an initial to-be-updated model with these assumed parameters was constructed according to the typical mass and stiffness distribution characteristic of shear buildings. After that, this to-be-updated model was updated using CMCM algorithm by combining with the measured frequencies of the actual structure when no damage was introduced. Thus, this updated model was regarded as a representation of the FEM model of actual structure, because their modal information were almost the same. Finally, based on this updated model, the frequency-change-ratio based method can be further proceed to realize the damage detection and localization. In order to verify the effectiveness of the developed method, a four-level shear building was numerically simulated and two actual shear structures, including a three-level shear model and an eight-story frame, were experimentally test in laboratory, and all the test results demonstrate that the developed method can identify the structural damage occurrence and location effectively, even only very limited modal frequencies of the test structure were provided.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.177-184
• /
• 2018

In case that limited resources can be mobilized, non-structural countermeasures such as 'monitoring using Information and Communication Technology might be one of solutions to mitigate disaster risks. Having established the monitoring system, operational and maintenance costs to maximize the effectiveness might trouble the authority concerned or duty attendant who is in charge. In this respect, "Guerrilla Sensor" would be very cost effective because of the inherent mobility characteristic. The sensor device with the IRIS camera and GPS (Global Positioning System) equipped, is basically battery-operated and communicates with WCDMA (Wideband Code Division Multiple Access). It has a strong advantage of capabilities for 'Disaster Response' with immediate and prompt action on the spot, making the best use of IoT (Internet of Things), especially with the mobile web. This paper will explain how the sensor system works in real-time GIS (Geographic Information System) pinpointing the exact location of the abnormal movement/ground displacement and notifying the registered users via SMS (Short Message Service). Real time monitoring with early warning and evaluation of current situations with LBS (Location Based Service), live image and data information can help to reduce the disaster impact. Installation of Guerrilla sensor for a real site application at Gimcheon, South Korea is also reported.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.3
• /
• pp.25-32
• /
• 2023

Purpose: This study is to improve awareness of MSDS in order to prevent university accidents and protect university laboratory workers. In order to improve awareness, measures to increase accessibility through auxiliary means (warning signs, One Page Sheet MSDS, etc) and ways to strengthen safety training (improvement and strengthen MSDS training). Research design, data and methodology: A questionnaire survey was adopted as a research method for this study. Question items were selected, modified, and supplemented by referring to the previous paper. Results: As a result of the survey, MSDS found that it was difficult to find the information they wanted and that there were many technical terms and limitations in using it. In addition, MSDS training is underway, but few university laboratory workers felt that training was helping. This shows that the effectiveness of training is virtually insignificant. Therefore, it seems that improvement measures are needed to solve this. Conclusions: One Sheet MSDS, an effective way for university laboratory workers to communicate information, and MSDS information should be provided with warning signs with large phrases and good visibility. In addition, this study proposes a One Sheet MSDS that prioritizes important MSDS items over all items in the MSDS, and in the field of education, several improvements are proposed, such as "To prevent problems and answers from being shared on the Internet" and "To improve the difficulty of checking the online curriculum".

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.137-144
• /
• 2015

The purpose of this study is to develop an warning system to detect real-time water quality abnormality using a multivariate statistical approach. In this study, we applied principal component analysis among multivariate data analyses which was used for the correlation between water quality parameters considering the real-time algorithm to determine abnormality in water quality. We applied our approach to real field data and showed the utilization of algorithm for the real-time monitoring to find water quality abnormality. In addition, our approach with Korea Meterological Adminstration database identified heavy rain data due to climate change is one of the most important factors to explain water quality abnormality.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.9-16
• /
• 2017

An Algorithm for Lane Detection and Lane Departure Warning for a Vehicle Driving on Roads is proposed in This Paper. Using Images Obtained from On-board Cameras for Lane Detection has Some Difficulties, e.g. the Increase of Fault Detection Ratio Due to Symbols on Roads, Missing Yellow Lanes in the Tunnel due to a Similar Color Lighting, Missing Some Lanes in Rainy Days Due to Low Intensity of Illumination, and so on. The Proposed Algorithm has been developed Focusing on Solving These Problems. It also has an Additional Function to Determine How much the Vehicle is leaning to any Side between The Lanes and, If Necessary, to Give a Warning to a Driver. Experiments Using an Image Database Built by Collecting with Vehicle On-board Blackbox in Six Different Situations have been conducted for Validation of the Proposed Algorithm. The Experimental Results show a High Performance of the Proposed Algorithm with Overall 97% Detection Success Ratio.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.131-138
• /
• 2009

In this paper, a dynamic warning system to forecast inland flooding associated with typhoons and storms is described. The system is used operationally during the typhoon season to anticipate the potential impact such as inland flooding on the coastal zone of interest. The system has been developed for the use of the public and emergency management officials. Simple typhoon models for quick prediction of wind fields are implemented in a user-friendly way by using a Graphical User Interface (GUI) of MATLAB. The main program for simulating tides, depth-averaged tidal currents, wind-driven surges and currents was also vectorized for the fast performance by MATLAB. By pushing buttons and clicking the typhoon paths, the user is able to obtain real-time water level fluctuation of specific points and the flooding zone. This system would guide local officials to make systematic use of threat information possible. However, the model results are sensitive to typhoon path, and it is yet difficult to provide accurate information to local emergency managers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.295-298
• /
• 2014

In recently, a climatic change(such as subtropical climate and frequent unusual high temperature) and the open-trade policies of agricultural & livestock products are increasing the outbreak risk of highly pathogenic avian influenza(HPAI) and foot and mouth disease(FMD), and accordingly the socio-economic damage and impacts are also increasing due to the cases such as damage from the last 5 times of FMD outbreak(3,800 billion won), from 10 years public control cost of Pine Wilt Disease (PWD)(238.3 billion won), and from the increased invasive pests of exotic plant like isoptera. Therefore, the establishment of new operation strategy of IoT(Internet of Things) based satellite early warning system(SEWS) for plants and animals as a subsystem of national disaster response and management system is being required, where the forensic technology & measures should be applied as a government policy to estimate the post compensation and to carry out the legal responsibility.

• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.39-53
• /
• 2021

By means of installing sloped rolling-type seismic isolators (SRI), the horizontal acceleration transmitted to the to-be-protected object above can be effectively and significantly reduced under external disturbance. To prevent the maximum horizontal displacement response of SRI from reaching a threshold, designing large and conservative damping force for SRI might be required, which will also enlarge the transmitted acceleration response. In a word, when adopting seismic isolation, minimizing acceleration or displacement responses is always a trade-off. Therefore, this paper proposes that by exploiting the possible information provided by an earthquake early warning system, the damping force applied to SRI which can better control both acceleration and displacement responses might be determined in advance and accordingly adjusted in a semi-active control manner. By using a large number of ground motion records with peak ground acceleration not less than 80 gal, the numerical results present that the maximum horizontal displacement response of SRI is highly correlated with and proportional to some important parameters of input excitations, the velocity pulse energy rate and peak velocity in particular. A control law employing the basic form of hyperbolic tangent function and two objective functions are considered in this study for conceptually developing suitable control algorithms. Compared with the numerical results of simply designing a constant, large damping factor to prevent SRI from pounding, adopting the recommended control algorithms can have more than 60% reduction of acceleration responses in average under the excitations. More importantly, it is effective in reducing acceleration responses under approximately 98% of the excitations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.180-182
• /
• 2022

As various crimes such as theft, assault, and sex crimes are increasing, each local government is installing CCTVs to prevent them, and operating and managing control centers for emergency response. When the control center detects a dangerous situation in the field, it responds immediately in connection with the police or 911. However, since it is managed by humans, the response speed is anomalous and the reality is that it is mainly used for post-processing. Therefore, through the artificial intelligence LED signage, it notifies the emergency situation at the site, and it serves as a warning function before getting help from passers-by or an accident occurs. In this paper, we design and research a warning system such as changing the lighting color of the LED signboard or making a sound by reflecting the artificial intelligence algorithm. We intend to contribute to public safety and social safety through this study.

• Journal of Korea Multimedia Society
• /
• v.18 no.4
• /
• pp.473-482
• /
• 2015

Doppler weather radar is an important tool for meteorological research. Through several decades of development, Doppler weather radar has enormous progress in understanding, detection and warning of meso and micro scale weather system. It makes a significant contribution to weather forecast and weather disaster warning. But the large amount of data process limits the application of Doppler weather radar. This paper proposed for fast weather radar data processing based on CUDA. CDUA is a powerful platform for highly parallel programming developed by NVIDIA. Through running plenty of threads, radar data can be calculated at same time. In experiment, CUDA parallel program can significantly improve weather data processing time.