• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.136-143
• /
• 2002

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• Journal of Powder Materials
• /
• v.7 no.1
• /
• pp.42-49
• /
• 2000

Densificationbehavior of conventional austenitic stainless steel powder compacts was studied by comparing the relative density of sintered compact(Ds)with that of green compacts(Dg)prepared with various catbon contents and P/M process. Dg of 304and 316 powders by warm compaction under pressure of 686 MPa at heating temperature of powder(553K) and dies (573K) were 80% and 81%, repectively, whichwere 2 and 3% higher than those of conventional green compacts at the same pressure. Ds of 304 compacts sintered at 1373K in H2 gas has the same value of 84% max. regardless of compacting temperature, and Ds of 316 compacts at the same sintering conditions were 80% by conventional compaction and 83% by warm compaction. Oxygen contents of 304 and 316 sintered compacts were increased 1.43∼2.94% and 0.010∼0.921% higher than those of raw powders and warm green compacts, respectively. In other case, Ds of 316 compacts sintered at 1573K in vacuum had the same value of 86%max. And Ds of 316 compacts at the same sintering conditions were 83% and 86% by conventional and warm compaction, respectively. Oxygen contents of 304 sintered compacts were 0.321% and 0.360%, and in case of 316, they were 0.419% and 0.182% by the respective compating condition. With carbon additions in the range 0.1∼0.6% Ds increased to the extent of 86∼89% in 304 sintered compacts, and to 82∼84% and 85∼87% in 316 according to different two compacting peocesses compared to those of sintered compacts without carbon addition.

• Journal of Haehwa Medicine
• /
• v.9 no.2
• /
• pp.223-239
• /
• 2001

A literature study on cancer therapy of warm-hot oriental medicine was done, and the results were as follows. 1. In oriental medicine, oncogens are six exopathogens, seven modes of emotion, overwork, pathogenic factors, and especially related with pathologic cold situation. 2. There are many capillaries in tuomr, and because temperature of inner space of tumor is higher than normal organization. Tumor cell has a character which is weak for high temperature. 3. Warm-hot herb drugs have effects of dissipating mass, warming kidney to reinforce yang and dispering, so it has a function of suppressing tumor as well as improving immunity in cancer therapy. 4. In traditional medical books, main prescriptions of cancer therapy are xinzhiyinyanggongjiwan(新製陰陽攻積丸), qianjinxiaoshiwan(千金硝石丸), feiqiwan(肥氣丸), xibenwan(息賁丸), fuliangwan(伏梁丸), beiqiwan, bentunwan(賁豚丸), zengsunwujiwan(增損五積丸), and these are composed of warm-hot herb drugs. 5. In current, the study of warm-hot drugs is progressed in immunological capacity, anti-tumor activity, stimulating bone marrow and regulating hormone secretion. It will be expected that advanced study of these must be accomplished in cancer patients.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.3
• /
• pp.747-756
• /
• 2015

Brown alga Undaria peterseniana has been interested in the commercial scale aquaculture for warm water species development in southern coastal area of Korea. However, this species was classified an endangered species caused by a decrease in habitat and natural population. In this study, inhabit characteristics of U. peterseniana was investigated in their natural habitat of Ulleung Island, Korea. The U. peterseniana population was occurred dense patches at 20~30m depth. Total length of the alga reached 1.0~2.0m and the largest width ranged 10.0~35.0cm during the study. In 2013, habitats of this species increased two sites compared with the previous year and their distribution extended to low depth (10m) of coastal area. In long-term data, seawater temperature revealed a continuous increment by strong going north of East Korea Warm Current or Ulleung Warm Eddy turning around the coast of Ulleung Island. It suggested that habitat extension of U. peterseniana may be caused by suitable settlement condition and increase of warm water around the coastal area. Current studies of this species may be continuously required in the possibility of fisheries resources as aquaculture species and index species of increment of water temperature at the fixed monitoring site in East Sea. This is the first study to research ecological feature U. peterseniana population at the natural habitat of Ulleung Island.

• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.93-101
• /
• 1998

Distribution of warm sensitivity over woman skin was investigated using Thurstone's paired comparisons method on 10 healthy female students. An iron probe 20mm in diameter and 108mm in length was used for the simulator, the temperature of which was adjusted at $40{\pm}0$. $5^{\circ}C$ in a warm water bath. Twenty-two parts on the left side of the body were examined. Warm sensitivity was significantly different among the body segments, that is, higher on the face and trunk and lower on the upper and lower extremities. The correlation coefficients between warm sensitivity and the warm spots were significant in posterior.

• Archives of Metallurgy and Materials
• /
• v.66 no.3
• /
• pp.679-682
• /
• 2021

The objective of the present research is to develop new admixed lubricants which can be used for high-density sintered iron when processed using warm die and warm compaction. Depending on various lubricants, the effect of compaction temperature on the ejection behavior and sintered properties was studied. Lubricants were prepared by mixing of Zn-stearate and ethylene bis stearamide (EBS) in various compositions. The iron powders blended with lubricants were compacted under the pressure of 700 MPa at various temperatures. The green compacts were sintered at 1120℃ for 30 min. Microstructure, density, hardness, and transverse rupture strength of sintered materials with different lubricants were investigated in detail.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.175-179
• /
• 2004

Since the formability of AZ31 magnesium alloy is not good in room temperature, it is known that high temperature forming is advantageous. However, many studies are necessary to find the proper forming temperature for Mg alloy. In this study, experimental and FEM analysis are performed to investigate the forming temperature for AZ31 sheet. The deep drawing process of square cup is used in forming experiment and FEA. The investigations are performed in three forming temperature, room temperature, $250^{\circ}C\;and\;400^{\circ}C$. The square cup is well formed in $250^{\circ}C$ forming temperature, on the other hand, the crack and failure is presented in corner section in room and $250^{\circ}C$ forming temperature. The main cause is investigated as the effect of hardening range by the experimental and FEM results.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.155-164
• /
• 2018

The temperature is a sense that can be felt by touch and sight. However, the concept of the temperature sensation is rarely used together with the concept of visual sensation and tactile sensation. In this study, the sensation of the temperature sensed through tactile and visual sense was investigated by the visual temperature depending on color and material characteristics. The textile was selected as a sample that could include color and material characteristics. The textile sample was composed of each 15-16 kinds of Yellow, Red, Blue, and Green of total 90 samples. The analytical method was to analyze first, the warm-cool of the colors of Yellow, Red, Blue, Green, and then to the visual temperature according to visual classification and tactile classification. And we investigated the correlation of the visual temperature depending on weight, thickness, and unevenness. As a result, the number of textiles felt by Cool and Warm differed according to the warm-cool of the colors feeling in the same textile. However, the visual temperature was different to each classification of textile. In particular, it was noticeable in thin, see-through and matte textiles. In relation to weight, thickness, unevenness and the visual temperature, the textile classification related to the weight is a classification of a hard, matte textile, and the textile classification related to the thickness is a thin, see-through textile.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.259-267
• /
• 1992

A survey of CTD casting was taken in April 1991 in the eastern Yellow Sea. The vertical structure of water column consists of the upper mixed warm, the mid cold and the lower warm layers devised clearly by a seasonal thermocline and the temperature inversion. A strongest temperature inversion is found in the southern part of the survey area. Where the low-layer water is $3^{\circ}C$ higher than the mid-layer water. The area of the temperature inversion covers about $100{\;}km{\;}{\times}{\;}100{\;}km$ and it is observed 1.5 month later. The temperature and salinity of the low-layer water shows a core structure in vertical sections and the tongue-like distribution extending from the south to the north, implying that the warm and saline water found in the oceanic front south of the survey area in early spring is advocated to the north over 150 km underneath the Yellow Sea cold water.

• Journal of Korean Critical Care Nursing
• /
• v.10 no.3
• /
• pp.53-64
• /
• 2017

Purpose : This study investigated the effects of active warming using a Warm Touch warming system or a cotton blanket in postoperative patients after general anesthesia for abdominal surgery. Methods : This quasi-experimental study utilized two experimental groups and one control group: a cotton-blanket group (n = 25) were warmed with a cotton blanket and a sheet; a forced-air warming group (n = 24) were warmed with a Warm Touch warming system, a cotton blanket, and a sheet; and a control group (n = 25) were warmed with a sheet. Measurement variables were postoperative pain, body temperature, and thermal discomfort. Data were analyzed using a one-way ANOVA, ${\chi}^2-tests$, Fisher's exact test, and a repeated measures ANOVA. Results : The effects of active warming using a Warm Touch warming system and a cotton blanket on postoperative patients was significant in reducing pain (F = 13.91, p < .001) and increasing body temperature (F = 12.49, p < .001). Conclusion : Active warming made a significant difference in pain and body temperature changes. Active warming methods may help patients' postoperative recovery and prevent complications. Further research is needed to explore the effects and side effects of active warming on recovering normothermia.