• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.155-176
• /
• 2005

There is some evidence that one of major factors to produce plantar fasciitis depends on the magnitude of the foot arch strain. The orthotics that can reduce the foot arch strain during locomotion may be effective to prevent or treat plantar fasciitis. Therefore, the purpose of this study was to investigate the effect of control condition and three types of foot orthotics on 3-dimensional foot arch strain that can produce plantar fasciitis during treadmill level and uphill walking and running. Sixteen male subjects are recruited and the arch length and height strain according to three types of foot orthotics with respect to control condition were measured by using two digital video cameras. The first hypothesis which the comfort of foot orthotics would be increased from arch pad, half length orthotics to full length orthotics was mostly accepted. It suggested that the types of the foot orthotics could be properly prescribed according foot regions that is pain or abnormal. The second hypothesis which the foot arch strain can be reduced by foot orthotics during level heel-toe walking and running and the third hypothesis which the foot arch strain can be reduced by foot orthotics during uphill heel-toe walking and running were rejected. The foot arch length and height strain during walking and running showed small and subject-specific characteristics and could not be optimal biomechanical variable to prove the overall comfort. The forth hypothesis which the foot arch strain cannot be reduced by foot orthotics during uphill toe walking and running was accepted. With the foot arch length and height strain during uphill toe walking and running the windlass mechanism suggested by Hicks can be explained successfully and excessive uphill toe walking and running can be one of cause of plantar fasciitis. The dynamic investigation on the foot arch such as walking and running should be carefully observed with integrated insights considering ligaments and foot bones as well as plantar fascia, extrinsic muscles and tendons, and intrinsic muscles and tendons.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.69-81
• /
• 2005

In this study using two-dimensional system of the analysis of image, when normal males in their twenties who have normal foot and step with heel first are walking and running, they who are wearing running shoes or barefoot are testing and comparing the exchange factors of heel control. There are following results of this test by verifying them with T-Test. 1) When they are running, there are two big different gap which is $6.05^{\circ}$ between barefoot and wearing the running shoes. The former is $174.79^{\circ}{\pm}6.31$ and the latter is $180.84^{\circ}{\pm}4.69$. But it is not statistically significant. The angle of first step with heel is $100.42^{\circ}{\pm}3.95$ with barefoot and $93.97^{\circ}{\pm}094$ with wearing the running shoes. In this case, it is statistically significant(p<.01) 2) When they are running, the angle of the Achilles' tendon has different gap which is $5.24^{\circ}$ between barefoot and wearing the running shoes. The former is $179.70^{\circ}{\pm}4.23$ and the latter is $184.94^{\circ}{\pm}4.09$. It is not statistically significant. The angle of minimal step with heel is $96.30^{\circ}{\pm}3.07$ with barefoot and $90.84^{\circ}{\pm}0.44$ with wearing the running shoes. In this case, it is statistically significant(p<.01). 3) In the angle of the Achilles' tendon and the angle of first step with heel, when they are walking, the angle of the Achilles' tendon has different gap which is $1.81^{\circ}$ between barefoot and wearing the running shoes. The former is $6.39^{\circ}{\pm}0.83$ and the latter is $8.20^{\circ}{\pm}1.85$. It is not statistically significant. The angle of first step with heel is $2.32^{\circ}{\pm}0.51$ with barefoot and $3.22^{\circ}{\pm}1.44$ with wearing the running shoes. It is not statistically significant. 4) In the angle of the take-off of Achilles' tendon, when they are walking, the angle of the take-off of Achilles' tendon has different gap which is $3.88^{\circ}$ between barefoot and wearing the running shoes. The former is $177.62^{\circ}{\pm}8.78$ and the latter is $173.74^{\circ}{\pm}16.31$. It is statistically significant(p<.05). Therefore, they are running, the angle of the take-off of Achilles' tendon is $178.37^{\circ}{\pm}19.28$ with barefoot and $171.26^{\circ}{\pm}12.18$ with wearing the running shoes. It is statistically significant(p<.05).

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2011

The purpose of this study is to analyze the effects of both various shoe types and bare feet on ground reaction force while walking. Ten first-year female university students were selected. A force platform(Kistler, Germany) was used to measure ground reaction force. Six types of shoe were tested: flip flops, canvas shoes, running shoes, elevated forefoot walking shoes, elevated midfoot walking shoes, and five-toed shoes. The control group was barefooted. Only vertical passive/active ground reaction force variables were analyzed. The statistical analysis was carried out using the SAS 9.1.2 package, specifically ANOVA, and Tukey for the post hoc. The five-toed shoe had the highest maximum passive force value; while the running shoe had the lowest. The first active loading rate for running shoes was the highest; meanwhile, bare feet, the five-toed shoe, and the elevated fore foot walking shoe was the lowest. Although barefoot movement or movement in five toed shoes increases impact, it also allows for full movement of the foot. This in turn allows the foot arch to work properly, fully flexing along three arches(transverse, lateral, medial), facilitating braking force and initiating forward movement as the tendons, ligaments, and muscles of the arch flex back into shape. In contrast movement in padded shoes have a tendency to pound their feet into the ground. This pounding action can result in greater foot instability, which would account for the higher loading rates for the first active peak for padded shoes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.201-202
• /
• 2010

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.936-941
• /
• 2014

Walking mechanisms are very important for legged robots to ensure their stable locomotion. In this research, Klann-linkage is suggested as a walking mechanism for a water-running robot and is optimized using level average analysis. The structure of the Klann-linkage is introduced first and design variables for the Klann-linkage are identified considering the kinematic task of the walking mechanism. Next, the design problem is formulated as a path generation optimization problem. Specifically, the desired path for the foot-pad is defined and the objective function is defined as the structural error between the desired and the generated paths. A process for solving the optimization problem is suggested utilizing the sensitivity analysis of the design variables. As a result, optimized lengths of Klann-linkage are obtained and the optimum trajectory is obtained. It is found that the optimized trajectory improves the cost function by about 62% from the initial one. It is expected that the results from this research can be used as a good example for designing legged robots.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.243-252
• /
• 2008

It has been reported that long-term exercise on a treadmill (running machine) may cause injury to the joints in a human's lower extremities. Previous works related to analysis of human walking motion are, however, mostly based on clinical statistics and experimental methodology. This paper proposes an analytical methodology. Specifically, this work deals with a comparison of normal walking on the ground and walking on a treadmill in regard to the external and internal impulses exerted on the joints of a human's lower extremities. First, a modeling procedure of impulses, impulse geometry, and impulse measure for the human lower extremity model will be briefly introduced and a new impulse measure for analysis of internal impulse is developed. Based on these analytical tools, we analyze the external and internal impulses through a planar 7-linked human lower extremity model. It is shown through simulation that the human walking on a treadmill exhibits greater internal impulses on the knee and ankle joints of the supporting leg when compared to that on the ground. In order to corroborate the effectiveness of the proposed methodology, a force platform was developed to measure the external impulses exerted on the ground for the cases of the normal walking and walking on the treadmill. It is shown that the experimental results correspond well to the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.43-43
• /
• 2000

In this paper, we introduce a case study of developing a miniature humanoid robot that has 16 degrees of freedom and is able to perform statically stable walking. The developed humanoid robot is 37cm tall and weighs 1,200g. RC servo motors are used as actuators. The robot can walk forward and turn to any direction on even surface. It equipped with a small digital camera, so it can transmit vision data to a remote host computer via wireless modem. The robot can be operated in two modes; One is a remote-controlled mode, in which the robot behaves according to the command given by a human operator through the user-interface program running on a remote host computer, the other is a stand-alone mode, in which the robot behaves autonomously according to the pre-programmed strategy. The user-interface program also contains a robot graphic simulator that is used to produce and verify the robot's gait motion. In our walking algorithm, the ankle joint is mainly used lot balancing the robot. The experimental results shows that the developed robot can perform statically stable walking on even surface.

• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.76-82
• /
• 2012

In this study, we aim to develop energy efficient walking and running robot with compliant leg. So, we propose the energy efficient locomotion control method. And, we experiment the proposed control method applying to the experimental robot with compliant leg. From the experiment, we look at whether the proposed control method can the robot walk and run energy efficiently.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.2
• /
• pp.1-13
• /
• 1998

The most important goal of character animation is to efficiently control the motions of a character. Until now, many techniques have been proposed for human gait animation, and some techniques have been created to control the emotions in gaits such as "tired walking" and "brisk walking" by using parameter interpolation or motion data mapping. This paper proposes a human running model based on a one-legged hopper with a self-balancing mechanism. The proposed technique exploits genetic programming to optimize movement, and can be easily adopted to various character models. We extend the energy minimization technique to generate various motions in accordance with emotional specification.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.363-378
• /
• 2009

The objective of the paper is to design and produce a walking robot such as humanoid robot under the given design requirements and constraints. An approach to design and produce walking robot with 2 legs was suggested. It is walking robot of 5 joints which have both of ankles, both of knee joint, and pelvis. It has 5 degrees of freedom and moves by only rotations. We review the key points before the design of the walking robot. The walking robot is consisted of 2 portions : motor and frame, control board. Final goal is to walk stably and if it detects and cognizes a special object, the walking robot avoids it and moves in other direction. The walking robot was made according to design procedures and tested by proposed algorithms. The running test was successful under given 4 modes. The findings of this research could think kinds of technologies concurrently and approach synthetically through process of design and production.