• Journal of Mechanical Science and Technology
• /
• v.17 no.8
• /
• pp.1234-1245
• /
• 2003

An experimental study was carried out to investigate the reduced frequency effect on the near-wake of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched around the center of the chord between -5$^{\circ}$and ＋25$^{\circ}$angles of attack at an airspeed of 3.4 m/s. The chord Reynolds number and reduced frequencies were 3.3 ${\times}$10$^4$, and 0.1, 0.7, respectively Phase-averaged axial velocity and turbulent intensity profiles are presented to show the reduced frequency effects on the near-wake behind the airfoil oscillating In pitch. Axial velocity defects in the near-wake region have a tendency to increase in response to a reduced frequency during pitch up motion, whereas it tends to decrease during pitch down motion at a positive angle of attack. Turbulent intensity at positive angles of attack during the pitch up motion decreased in response to a reduced frequency, whereas turbulent intensity during the pitch down motion varies considerably with downstream stations. Although the true instantaneous angle of attack compensated for a phase-lag is large, the wake thickness of an oscillating airfoil is not always large because of laminar or turbulent separation.

• Wind and Structures
• /
• v.34 no.5
• /
• pp.451-467
• /
• 2022

The flow around a high-speed train with three underbody structures in the bogie area is numerically investigated using the improved delayed detached eddy simulation method. The vortex structure, pressure distribution, flow field structure, and unsteady velocity of the wake are analyzed by vortex identification criteria Q, frequency spectral analysis, empirical mode decomposition (EMD), and Hilbert spectral analysis. The results show that the structures of the bogie and its installation cabin reduce the momentum of fluid near the tail car, thus it is easy to induce flow separation and make the fluid no longer adhere to the side surface of the train, then forming vortices. Under the action of the vortices on the side of the tail car, the wake vortices have a trend of spanwise motion. But the deflector structure can prevent the separation on the side of the tail car. Besides, the bogie fairings do not affect the formation process and mechanism of the wake vortices, but the fairings prevent the low-speed fluid in the bogie installation cabin from flowing to the side of the train and reduce the number of the vortices in the wake region.

• Journal of the Korean Society of Visualization
• /
• v.4 no.2
• /
• pp.44-50
• /
• 2006

A visualization study on the boundary layer and near-wake of an NACA 0012 airfoil was con-ducted in order to investigate the influence of boundary layer behavior on the near-wake at low Reynolds numbers. The present study is investigated at static angles of attack ${\alpha}=0^{\circ},\;3^{\circ},\;6^{\circ}$ and $Re=2.3{\times}10^4,\;3.3{\times}10^4,\;4.8{\times}10^4$ by using a smoke-wire technique. The results of this study show that the laminar boundary layer on the airfoil surface is attached to the surface at ${\alpha}=0^{\circ}$, and that laminar separation of boundary layer on the airfoil surface occurs at ${\alpha}=3^{\circ}$. Furthermore, reattachment of the boundary layer occurs in the case of ${\alpha}=6^{\circ}$. In the current study, the location of the laminar separation point moves upstream as the Reynolds number and the angle of attack increase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.8-18
• /
• 2003

An experimental study is carried out to investigate the Reynolds number effects on the near-wake of an airfoil oscillating in pitch. An NACA 4412 airfoil is sinusoidally pitched about the quarter chord point between the angle of attack -6$^{\circ}$ and +6$^{\circ}$. A hot-wire anemometer is used to measure the turbulent intensity in the near-wake region of an NACA 4412 airfoil. The freestream velocities of present work are 3.4, 12.4, 26.2 m/s, and the corresponding Reynolds numbers are $5.3{\times}10^4,\;1.9{\times}10^5,\;4.1{\times}10^5$ and the reduced frequency is 0.1. Axial turbulent intensity profiles are presented to show the Reynolds number effects on the near-wake region behind an airfoil oscillating in pitch. All the cases in these measurements show that the turbulent intensities by the change of the Reynolds number are very large at the lowest Reynolds number $R_N=5.3{\times}10^4$; and are small at the other Reynolds number $(R_N=1.9{\times}10^5\;and\;4.1{\times}10^5)$ in the near-wake region. The significant difference of turbulent intensity between $R_N=5.3{\times}10^4,\;and\;1.9{\times}l0^5$ is observed. A critical value of the Reynolds number in the near-wake of an oscillating NACA 4412 airfoil which indicates laminar separation, no separation or turbulent separation exists in the range between $R_N=5.3{\times}10^4\;and\;1.9{\times}10^5$.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.63-67
• /
• 2015

항공기는 공중에서 양력을 발생시키는 과정에서 wake vortex를 생성하며, 항공기 중량과 항공기 주위의 기상(특히 바람 vector)에 따라 wake vortex의 크기와 그 소산속도가 결정된다. 이러한 Raw data 정보는 항공기에 장착된 FMS와 Sensor를 통해 수집될 수 있으며, 이를 ADS-B를 이용하여 지상관제기관과 주변항공기에 전파하면, 실시간으로 매우 정확한 후류크기와 영향범위를 확인할 수 있고, 이로써 보다 안전하고 효율적인 항공기 후류분리가 가능할 것으로 볼 수 있다. 본 자료는, 이러한 맥락에서 ICAO(ASBU)의 후류분리기준 축소를 통한 활주로사용증진 동향과, RTCA DO-260B의 부록(V) "Potential wake vortex and Arrival management ADS-B Application" 요지를 소개한다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.652-657
• /
• 2003

A wind-tunnel experiment is carried out to examine the applicability of a new passive device, wake disrupter, to flow over a model vehicle for drag reduction. The wake disrupter is a small-size rectangular body attached to a part of the trailing edge of the model vehicle, designed to perturb an essentially two-dimensional nature of wake. A pair of wake disrupter is mounted on the mid-span at the upper and lower trailing edges. From a parametric study about the size of wake disrupter, it is found that the optimum disrupter increases the base pressure by about 20%. Large eddy simulation is also conducted to confirm the experimental result, and shows that the wake is indeed disrupted by the present device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.859-867
• /
• 2007

The objective of this study is to develop and validate a numerical method which can handle the multi-rotor aerodynamic characteristics. For the purpose of power estimation, table look-up method is implemented to the existing unsteady panel code that is coupled with a time-marching free wake model. Also, the Reynolds number scaling is implemented for the application to various regions of Reynolds number. The computed results are validated against the available experimental data for coaxial and tandem rotors. In the validation case for the coaxial rotor, more accurate result is acquired when the thickness effect is considered. The wake instability problem occurs at a particular separation distance between the rotors for tandem rotors. The wake instability is avoided by setting the single-rotor wake geometry as the initial wake geometry for the multi-rotor analysis. The estimated result for rotor separation effect is compared with the result of the momentum theory.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.498-509
• /
• 2021

The wake turbulence at the wingtip of preceding aircraft may affect the normal operation of following aircraft. Aircraft are classified into four categories according to their maximum take-off weight, and horizontal separation is applied with this category matrix. The FAA and EUROCONTROL revealed that the magnitude and effect of preceding aircraft wake turbulence were smaller than the current distance separation minima suggest. This new information presents the opportunity for revising wake turbulence minima into seven categories (RECAT). This paper confirms the feasibility of implementing RECAT at major airports in South Korea using the draft of ICAO Doc. 10122. The paper also calculates the ultimate runway capacity of Incheon International Airport in South Korea using the Harris Model and comparatively analyzes the amount of runway capacity. As a result of the analysis, it was confirmed that the implementation of RECAT could increase the ultimate runway capacity of Incheon International Airport. This paper's calculation methods and results can be used as primary data for implementing RECAT in other airports.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.3
• /
• pp.25-39
• /
• 2004

An experimental study was quantitatively carried out in order to investigate the influence of flow conditions on a boundary layer in the near-wake of a flat plate. Tripping wires attached at various positions were selected to change flow conditions of a boundary layer in the vicinity of trailing edge. The flows such as laminar, transitional, and turbulent boundary layer at 0.98C from the leading edge are imposed to investigate the evolution of symmetric and asymmetric wake. Measurements were made at freestream velocity of 6.0m/s, and the corresponding Reynolds number is $2.8{\times}10^5$. An x-type hot-wire probe(55P61) was employed to measure at 8 stations in the near-wake region. Test results show that the near-wake of the flat plate for the case of a laminar and transitional boundary layer is sensitive to mean flow shear generated after separation but for the case of turbulent boundary layer is insensitive.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.180-187
• /
• 2016

As distinct from a slender body, the separation of the boundary layer on a bluff body give rise to complex wakes in which various kinds of vortices form, develop and interact with each other. In this paper, we investigate cavitation wake field behind wedge shaped two-dimensional fin models. Eight different models are tested at the Chungnam National University Cavitation Tunnel (CNU-CT). First, we measure wake cavity shapes and compare with numerical results, which shows the good agreement with each other. In addition, we demonstrate that wake flow characteristics of the control fin are clearly identified by the correlation analysis of high-speed camera images and pressure fluctuation measurements.