• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.501-502
• /
• 2006

In-plane type micro piezoelectric micro grippers with pneumatic lines for manipulation biological cells and micro parts were designed, fabricated, and characterized. Micro grippers were fabricated through the final micro-sanding process after wafer level bonding between the etched 4' Si wafer with pneumatic channels and 4' glass wafer. Displacements between two jaws of fabricated micro grippers were linearly increased with applying voltages to piezoelectric actuator. In the case of applying 80 V, the displacement between two jaws was $160{\mu}m$. Using fabricated micro grippers, manipulation tests for biological cell and micro parts with the sizes less than $100{\mu}m$ are in process.

• 센서학회지
• /
• 제21권2호
• /
• pp.121-126
• /
• 2012

Piezoresistive type contact force sensor array is fabricated by (111) Silicon bulk micromachining for continuous blood pressure monitoring. Length and width of the unit sensor structure is $200{\mu}m$ and $190{\mu}m$, respectively. The gap between sensing elements is only $10{\mu}m$. To achieve wafer level packaging, the sensor structure is capped by PDMS soft cap using wafer molding and bonding process with $10{\mu}m$ alignment precision. The resistance change over contact force was measured to verify the feasibility of the proposed sensor scheme. The maximum measurement range and resolution is 900 mm Hg and 0.57 mm Hg, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.479-480
• /
• 2012

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 제16회 정기총회 및 동계학술발표회
• /
• pp.170-171
• /
• 2005

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.184-185
• /
• 2004

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.72.2-72
• /
• 1998

• 한국재료학회지
• /
• 제16권2호
• /
• pp.99-105
• /
• 2006

This paper reports an improved bonding method using the IPA (isopropyl alcohol) assisted low-temperature bonding process for the PMMA (polymethylmethacrylate) micro CE (capillary electrophoresis) chip. There is a problem about channel deformations during the conventional processes such as thermal bonding and solvent bonding methods. The bonding test using an IPA showed good results without channel deformations over 4 inch PMMA wafer at $60^{\circ}C$ and 1.3 bar for 10 minutes. The mechanism of IPA bonding was attributed to the formation of a small amount of vaporized acetone made from the oxidized IPA which allows to solvent bonding. To verify the usefulness of the IPA assisted low-temperature bonding process, the PMMA micro CE chip which had a $45{\mu}m$ channel height was fabricated by hot embossing process. A functional test of the fabricated CE chip was demonstrated by the separation of fluorescein and dichlorofluorescein. Any leakage of liquids was not observed during the test and the electropherogram result was successfully achieved. An IPA assisted low-temperature bonding process could be an easy and effective way to fabricate the PMMA micro CE chip and would help to increase the yield.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.7-12
• /
• 2000

유리 프릿과 유리 튜브를 사용하지 않고 FED, VFD와 PDP를 봉입할 수 있는 기반 기술로서, 진공 내에서 두 장의 sodalite유리 기판들을 정전 열 접합하는 공정을 연구하였으며, 대기 중에서 정전 열 접합한 기판 쌍들과 비교하여 접합 특성을 비교.분석하였다. 진공 분위기 내에서 비정질 실리콘 interlayer를 이용하여 접합된 유리 기판 쌍의 경우, 대기압의 경우와 비교할 때 동일한 접합 온도와 전압에서 접합 강도가 상대적으로 낮은 것으로 측정되었으며, 산소 분위기의 경우 접합 강도가 증가하였음을 확인하였다. XPS와 SIMS를 통한 비정질 실리콘 표면 및 유리기판 표면의 조성 변화 분석으로부터, 진공내에서 산소가 부족함으로써 정전 열 접합 과정에서 부가적으로 수반되는 실리콘 산화막이 불완전하게 형성된 것으로 해석 할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1988-1990
• /
• 1996

In this work, we have grown or evaporated thermal oxide and E-beam oxide on the (100) oriented n-type silicon wafers, respectively and they were directly bonded with another silicon wafer after hydrophilization using solutions of three types of $HNO_3$, $H_{2}SO_{4}$ and $NH_{4}OH$. Changes of average surface roughness after hydrophilizations of the single crystalline silicon wafer, thermal oxide and E-beam evaporated silicon oxide were studied using atomic force microscope. Bonding interfaces of the bonded pairs were inspected using scanning electron microscope. Void and non-contact area of the bonded pairs were also inspected using infrared transmission microscope.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1639-1645
• /
• 2002

Micro engine that includes Micro scale combustor is fabricated. Design target was focused on the observation of combustion driven actuation in MEMS scale. Combustor design parameters are somewhat less than the size recommended by feasibility test. The engine structure is fabricated by isotropic etching of the photosensitive glass wafers. Electrode formed by electroplating of the Nickel. Photosensitive glass can be etched isotropically with almost vertical angle. Bonding and assembly of structured photosensitive glass wafer form the engine. Combustor size was determined to be 1 mm scale. Movable piston is engraved inside the wafer. Ignition was done by nickel spark plug which was electroplated with thickness of 40 ${\mu}{\textrm}{m}$. The wafers were bonded by epoxy that resists high temperature. In firing test due to the bonding method and design tolerance pressure buildup by reaction was not confirmed. But ignition, flame propagation and actuation of micro structure from the reaction was observed. From the result basement of design and fabrication technology was obtained.