• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.336-344
• /
• 2008

Rheological properties of cement pastes containing blast furnace slag (BFS: 3,900, $7,910\;cm^2/g$) or fly ash powder (FA: 4,120, $8,100\;cm^2/g$) according to the ratio of water/binder (W/B) and the dosage of polycarboxylate type superplasticizer (PC) were investigated by a mini slump and a coaxial cylinder viscometer. In this experiment, the ratio of replacing OPC with BFS or FA was 30 wt%, the W/B was from 30 to 70 wt%. As a result, the fluidity of cement paste containing BFS or FA was improved with increasing W/B and the dosage of PC. BFS or FA replaced cement paste with W/B 70% and PC 0.3% showed the highest fluidity. The segregation range of cement paste was occurred below $10\;d/cm^2$ of the yield stress and below 50 cPs of the plastic viscosity by the coaxial cylinder viscometer. And also it was formed that the plastic viscosity and the yield stress of FA replaced cement paste were higher than them of BFS replaced cement paste.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권10호
• /
• pp.1540-1544
• /
• 2003

This study chiefly aimed to ascertain the effect of age at weaning on caecal content characteristics, post-weaning performance and health of rabbits. A secondary aim was to study the effect of dietary restriction on performance and health of rabbits. After delivery, 30 litters of 8 pups each, were housed in separate cages. Fifteen litters were weaned 24 days from birth (group W 24) while the other 15 were weaned at 28 days (group W28). After weaning, 53 rabbits of group W24 and 56 of group W28 were fed ad libitum (group LIB), while 53 rabbits of group W24 and 57 of group W28 were restricted (group RES). All the rabbits were kept in individual cages. Fourteen other rabbits of groups W24 (7 fed ad libitum and 7 restricted) and 7 of group W28 were sacrificed to obtain data regarding caecum weight and caecal content. Age at weaning affected neither the state of health nor the final live weight. In comparison with those of group W28, the rabbits weaned at 24 days had a lower daily gain until 35 days of age but gain was higher subsequently. From the 28th day, however, the feed intake and the feed conversion ratio of the group W24 rabbits were always better than those of W28. The restricted diet until 42 days resulted in a lower weight both at 42 days (1,078 vs. 1,164 g) and at 70 days (2,192 vs. 2,294 g). Indeed, from the 42nd day, despite receiving feed ad libitum the rabbits of the restricted group continued to ingest less feed (120.8 vs. 127.2 g) than those of the ad libitum group, and had a slightly lower daily gain (39.8 vs. 40.3 g). The measurements carried out on the caecum highlighted significant differences among the groups in caecal content (33.1 vs. 31.7 vs. 25.3 g respectively for groups W24LIB, W28 and W24RES), for total volatile fatty acids (53.2 vs. 50.6 vs. 44.5 mmol/l respectively for groups W24LIB, W28and W24RES) for ammonia (7.0 vs. 7.2vs 8.8 mmol/l respectively for groups W24LIB, W28 and W24RES), for propionate (5.7 vs. 6.3 vs. 8.1% respectively for groups W24LIB, W28 and W24RES) and for propionate/butyrate (0.33 vs. 0.36 vs. 0.49 respectively for groups W24LIB, W28 and W24RES).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.645-650
• /
• 2003

The purpose of this study is to provide the optimum mix design of cold weather concrete to be placed at the foundation structures in substation. The basic performance tests including slump and slump flow, air content, compressive strength and freezing & thawing resistance were conducted for cold weather concrete by varying with W/C ratios such as 40%, 50% and 60% and air contents such as 3%, 4%, 5% and 6%. The effect on durability of concrete corresponding to the increasing amount of air content and W/C ratio was evaluated and the optimum mix design was recommended. From this study, the concrete mix design containing 6% of air content and 45% of W/C ratio is recommended for the foundation concrete of substation.

• 한국산업융합학회 논문집
• /
• 제16권1호
• /
• pp.1-8
• /
• 2013

In case that W/B is 20%, 30%, 40% respectively, the effects of additive and shrinkage reducing agent on the autogenous shrinkage for high strengthen concrete through the substitution of FA and SF analysis were obtained as following conclusions. When the ratio of FA increased, the compressive strength of high strengthen concrete is decreased in the early times. As the ratio of SF increase, the compressive strength also increased. Comparing with PC(Portland Cement) for 7 days curing, the strength is 13.8% of FA10 + SR0.5 and 19.2% of FA15 + SR0.5 decreased when W/B is 20%, and 6.1% of SF7.5 + SR0.5, 4.8% of SF15 + SR0.5, the strength are increased. In case that W/B is 30%, 13.1% of FA10 + SR0.5 19.1% of FA15 + SR0.5 the strength is decreased and 4.1% of SF 7.5 + SR0.5, 7.2% of SF15 + SR0.5 the strength are increased. In case of W/B 40%, 4.3% of FA10 + SR0.5, and 8.7% of FA15 + SR0.5, the strength is decreased and 3.3% of SF7.5 + SR0.5, 6.3% SF15 + SR0.5 the strength is increased. When the ratio of SR is 0.5%, autogenous shrinkage strain of OPC concrete appeared $-417{\times}10-6$ in 56days curing, the shrinkage strain is decreased 23.7%. The reducing effects of autogenous shrinkage when the mineral and shrinkage agent are used are the same as ones when only shrinkage agent used.

• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.422-429
• /
• 2003

The reduction mechanism of the composite powders mixed with $WO_3$ and CuO has been studied by using thermogravimetry (TG), X-ray diffraction, and microstructure analyses. The composite powders were made by simple Turbula mixing, spray drying, and ball-milling in a stainless steel jar with the ball to powder ratio of 32 to 1 at 80 rpm for 1 h without process controlling agents. It is observed that all the oxide composite powders are converted to W-coated Cu composite powder after reducing treatment under hydrogen atmosphere. For the formation mechanism of W-coated Cu composite powder, the sequential reduction steps are proposed as follows: CuO contained in the ball-milled composite powder is initially reduced to Cu at the temperature range from 20$0^{\circ}C$ to 30$0^{\circ}C$. Then, $WO_3$ powder is reduced to W $O_2$ via W $O_{2.9}$ and W $O_{2.72}$ at higher temperature region. Finally, the gaseous phase of $WO_3(OH)_2$ formed by reaction of $WO_2$ with water vapour migrates to previously reduced Cu and deposits on it as W reduced by hydrogen. The proposed mechanism has been proved through the model experiment which was performed by using Cu plate and $WO_3$ powder.

• 한국제4기학회지
• /
• 제15권1호
• /
• pp.37-45
• /
• 2001

제주도에 분포하는 스코리아콘의 사면발달을 밝히기 위하여 49개 스코리아콘을 대상으로 화산체의 비고, 저경에 대한 비고의 비율($H_{co}$/$W_{co}$), 저경과 화구경의 차에 대한 비고의 비율($H_{co}$/$W_{co-cr}$), 및 사면각등의 지형특성치를 계측하였다. 스코리아콘의 형성시기가 오래될수록 지형특성치는 일정한 비율로 감소하므로 화산체의 형태비교학적 방법에 의해 스코리아콘의 형성시기를 추정할 수 있다. 스코리아콘의 화구는 침식작용으로 메워지며 결국에는 사라지게 되므로 화산체의 형성시기와 가장 높은 상관관계를 보이는 지형특성치는 저경과 화구경의 차에 대한 비고의 비율이나 평균사면각($\theta_{ave}$) 이다. 스코리아콘의 평균사면각은 $\theta$$_{ave}$ : $tan^{-1}$〔2.$H_{co}$/$W_{co-cr}$〕로서 구할 수 있다. 제주도는 플라이스토세에 네 번에 걸친 분화활동기를 통하여 형성되었다. 제4분출기(0.1~0.025Ma)에 형성된 최신의 스코리아콘은 평균사면각의 평균치가 23.6$\pm$1.7$^{\circ}$인데 비하여, 제3분출기(0.3~0.1Ma)와 제2출기(0.6~0.3Ma)의 스코리아콘은 각각 18.9$\pm$$1.7^{\circ}C$및 12.6$\pm$$1.9^{\circ}C$이다.다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권7호
• /
• pp.104-112
• /
• 2019

3D 프린팅용 시멘트 복합체 모르타르의 재료적 특성을 평가하고 굳지 않은 상태에서의 모르타르 간극비를 단일지표로 하여 프린팅이 가능한 성능 범위를 산출하였다. 시험 결과, W/B가 증가하면 모르타르 흐름값은 증가하였으며 밀도와 강도는 감소하였다. SS/B가 증가하면 모르타르 흐름값은 감소하였다. 그러나 강도와 밀도는 특정 SS/B까지 증가하다 감소하였다. Ad/B가 증가할수록 모르타르 흐름값, 밀도, 강도는 감소하였다. 이러한 경향성은 따른 3D 프린팅용 모르타르의 목표 성능 만족하기 위한 배합설계를 어렵게 한다. 한편, 간극비가 증가할수록 모르타르 흐름값은 비례적으로 증가하는 반면 밀도와 강도는 감소하는 경향을 보였으며, 그 상관성은 높게 나타났다. 이는 배합설계에 따른 재료적 특성을 제어하는 단일지표로서 간극비를 활용할 수 있음을 나타낸다. 3D 프린터로 출력 가능한 모르타르 배합범위를 시험한 결과, 간극비가 0.6~0.7일 때 출력이 가능하였다. 이를 검증하기 위해 W/B 35.0 %, SS/B 60.0 %, Ad/B 0.1%를 배합하여 간극비를 0.634로 설계했을 때 출력이 가능하였다. 그러나 3D 프린팅 출력 모르타르의 품질을 향상하기 위해서는 혼화제를 활용하는 추가적인 연구가 필요하다.

• KSBB Journal
• /
• 제30권6호
• /
• pp.332-338
• /
• 2015

The objective of this study was designed to determine the possibility of bioethanol production from wasted medium density fiberboard (wMDF). We were investigated the enzymatic saccharification characteristics using the enzyme (Cellic CTec3) after pretreatment with sodium chlorite. According to the component analysis results, the lignin contents before and after the pretreatment of wMDF (milling using sieve size of $1,000{\mu}m$) was significantly reduced from 31.13% to 4.11%. Therefore, delignification ratio of pretreated wMDF was found to be up to about 87-89% depending on the sieve size. And we were tested to compare the saccharification ratio according to the sieve size of wMDF ($1,000{\mu}m$, $200{\mu}m$), but it was no significance depending on the sieve size. When enzyme dosage was 5% based on the substrate concentration, enzymatic saccharification ratio was obtained up to 70% by maintaining at $50^{\circ}C$ for 72 hours. We could made the substrate concentration of pretreated wMDF ($1,000{\mu}m$) up to 12% and then enzymatic saccharification ratio was 76.8%, also contents of glucose and xylose were analyzed to 77,750 and 14,637 mg/L, respectively.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.227-232
• /
• 2000

본 논문에서는 차세대 멀티미디어 통신인 IMT-2000의 엑세스 방식으로 제안되고 있는 비동기 W-CDMA(3GPP) 시스템을 적용, 기존의 IS-95와 달리 Pilot symbole을 이용하여 페이딩 채널을 추정하여, 이를 통한 다중 사용자 간섭제거 방법으로 PIC(Parallel Interference Cancellation)을 적용하고 DPCCH(Control)과 DPDCH(Data)의 파워 비에 따른 성능을 분석하였다. 시뮬레이션 결과 Hand design인 경우 사용자 5명의 설정에서 C:D = 3:7 과 4:6 에서 가장 좋은 성능을 보였으며, 사용자를 10명으로 늘렸을 경우 C:D = 4:6 보다는 3:7 의 비율에서 가장 좋은 성능을 보였다.

• 한국축산식품학회지
• /
• 제41권5호
• /
• pp.788-801
• /
• 2021

This study examined biochemical components, fatty acids, antioxidant dipeptides, and muscle fiber density of breast and thigh muscles from Korean new native chicken strains (A and B) at two slaughter ages, compared with white semi-broiler (W) or broilers. The pH values were different by chicken breed. The new native strains had the lowest fat content in the breast at 12 wk (p<0.05). Regardless of the muscles, A and B at 12 wk had higher levels of arachidonic acid (ARA; C20:4), docosahexaenoic acid (DHA; C22:6), and nervonic acid (C24:1) than broilers (p<0.05). A similar result was observed for the polyunsaturated fatty acids (PUFAs) and polyunsaturated and saturated fatty acids ratio (P/S) content in the breast. Irrespective of the muscles, A and B enriched with omega-3 fatty acids had a lower ω-6/ω-3 PUFA ratio than broilers (p<0.05) at 12 wk. Of the antioxidant di-peptides, the anserine contents were highest in A and B than in the W or broilers (p<0.05), regardless of the muscles and slaughter ages. Furthermore, the breast meat from A and B contained a higher muscle fiber density for both slaughter ages than the W and broilers (p<0.05). Based on these findings, even if the commercial birds (broilers or W) are raised under the similar environmental conditions as A and B, the new native chicken strains have distinct meat quality attributes, particularly higher ARA and DHA levels, lower ω-6/ω-3 PUFA ratio, and higher anserine contents.