• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.327-334
• /
• 1995

In order to observe the influence of pulsed Nd:YAG laser at its out-of-contact with dentin on tooth temperature, we have applied pulsed Nd:YAG laser to 2mm thick dentin sample at a point of contact and from a distance of 1mm, 2mm, 3mm and 4mm with an energy of 0.3W, 0.5W, 0.8W, 1.5W and 2.0W. They were exposed to periods of 3 seconds, 6 seconds, 9 seconds and 15 seconds respectively and measured temperature changes. The results as follows : 1. When the time ad intensity of power were constant, the temperature changes on dentin of tooth depended on the distance. The temperature increased when the laser intensity increased bu two other conditions were contact. 2. At the point of contact, the temperature has risen over $5^{\circ}C$ regrdless of intensity of the power or the time. However, there was $5^{\circ}C$ fluctuation with 0.3 W for 3 seconds treatment. 3. The temperature change was less than $5^{\circ}C$ thermal change at the distance of 1mm and 2mm respectively when lased for 3 seconds, 6 seconds, 12 seconds and 15 seconds with 0.3 W. Similar results were observed at 3 and 6 seconds treatment with 0.5 W and at 3 seconds treatment with 0.8 and 1.0W respectively. 4. It showed less than 5(C thermal change when lased for 3 seconds, 6 seconds, 9 seconds, 12 seconds and 15 seconds with 0.3W at the distance of 3mm and 4mm. The same results were seen in 3 seconds, 6 seconds and 9 seconds treatment with 0.5W and in 3 seconds with 0.8W and 1.0W respectively. As we have seen the above, the results has indicated that pulsed Nd:YAG lasing at its off contact on dentin of 2mm thickness will not cause irreversible changes if lasing intensity, lasing distance and lasing time are appropriate.

• 대한임상전기생리학회지
• /
• 제3권1호
• /
• pp.13-29
• /
• 2005

This study was performed to examine the effects of therapeutic doses of ultrasound on cell migration distance and proliferation of biopsies from articular cartilage. Articular cartilage biopsies were isolated from proximal part of the tibial of chicken, and cultured. Cartilage explants were exposed for a single 5 min to ultrasound with $0.1{\sim}1.6\;W/cm^2$ (spatial average-temporal average) at a frequency of 1 MHz. A control group was treated with the ultrasound generator switched off. The cell migration distance and cell proliferation analysis were performed on day 6 after stimulation of ultrasound. The results revealed that ultrasound influenced cell migration distance and cell proliferation in intensity-dependent manner. It was found that ultrasounds at $0.2\;W/cm^2$, $0.4\;W/cm^2$, and $0.8\;W/cm^2$ were significantly increase respectively both cell migration distance and cell proliferation (p<0.05). However, cell migration distance and cell proliferation were not affected by exposure ultrasound at $0.1\;W/cm^2$ and $1.6\;W/cm^2$ compared with control group. These results suggest that low-intensity ultrasounds at $0.2\;W/cm^2$, $0.4\;W/cm^2$, and $0.8\;W/cm^2$ may stimulate cell proliferation of the chondroblasts, and reflect a potential role in cartilage repair.

• 전기전자학회논문지
• /
• 제26권1호
• /
• pp.89-94
• /
• 2022

W-대역(75-110GHz)은 기존 5G 대역에 비해 최소 10배 이상의 대역폭 활용이 가능한 대역이다. 따라서 가상 및 증강 현실과 같이 빠른 속도와 저지연이 요구되는 미래 이동통신에 적합한 대역 중 하나이다. 그러나 파장이 짧아 높은 경로손실을 가지며, 대기환경에도 매우 민감한 특성을 가진다. 따라서 향후 W-대역 통신 시스템 개발을 위해서는, 채널 환경에 따른 경로손실의 특성을 분석할 필요가 있다. 본 논문에서는 W-대역 경로손실의 특성을 분석하기 위해 랜덤 포레스트 기법을 이용, 다양한 채널 환경 파라미터에 따른 경로손실 데이터를 통해 거리 구간에 따른 채널 파라미터의 영향성을 분석하였다. 시뮬레이션 결과, 근거리에서의 경로손실은 거리가 가장 높은 영향성을 가지며, 채널 환경 요소는 거의 무시된다. 그러나 거리 구간이 길어질수록 거리의 영향성이 감소하는 동시에 클러터와 강우량의 영향성이 증가하였다.

• Journal of applied mathematics & informatics
• /
• 제37권5_6호
• /
• pp.411-427
• /
• 2019

The existence, uniqueness and iterative approximations of fixed points for some contractive mappings of integral type defined in complete metric spaces with w-distance are proved. Four examples are given to demonstrate that the results in this paper extend and improve some well-known results in the literature.

• 충청수학회지
• /
• 제20권3호
• /
• pp.203-210
• /
• 2007

Let X be a hyperbolic region in the complex plane C such that the hyperbolic metrix ${\lambda}_X(w){\mid}dw{\mid}$ exists. Let $R(X)=sup\{{\delta}_X(w):w{\in}X\}$ where ${\delta}_X(w)$ is the euclidean distance from w to ${\partial}X$. Here ${\partial}X$ is the boundary of X. A hyperbolic region X is called a Bloch region if R(X) < ${\infty}$. In this paper, we obtain lower bounds for the hyperbolic metric on Bloch regions in terms of the distance to the boundary.

• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.109-116
• /
• 2006

This paper presents a real time distance measuring device using a W-band linear frequency modulated continuous wave(FMCW) radar and TMS320C6701 digital signal processor(DSP). We used FFT operation for measuring distance with the beat signals and the results of FFT could be converted to distance with ease. We presented how to implement a real time miniaturized hardware system including network protocols using a single DSP core. Also how to control the modulation signal of FMCW system to compensate the VCO nonlinearity using the Time Gating control of DSP is presented. We have shown that the proposed system has good performances for measuring distance in real time via outdoor environment experiments.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.21-24
• /
• 2019

In this paper, 5.8GHz 25W microwave wireless power transmission system was developed. The transmission system is composed of a signal generator, a 1W drive amplifier, a 25W power amplifier, and a circularly polarized transmission antenna. The receiving system was fabricated with an integrated receiver that combines a circularly polarized receiving antenna, a pass band filter, and an RF-DC converter. And a multi-integrated receiver had twelve parts, including an integrated receiver. Under the conditions, voltage and current were measured for the system at 5cm intervals from a minimum distance of 5cm to a maximum distance of 80cm. The power was calculated for the system. The results of the system are shown in tables and graphs. The power decreases with distance, but the power does not drop sharply due to a multi-integrated receiver.

• 한국축산시설환경학회지
• /
• 제8권3호
• /
• pp.165-170
• /
• 2002

This study was carried out to measure the 3D-distance of a cow model teat for an application possibility on Robotic Milking System(RMS). A teat recognition algorithm was made to find 3D-distance of the model by using Gonzalrez's theory. Some of the results are as follows. 1 . In the distance measurement experiment on the test board, as the measured length, and the length between the center of image surface and the measured image point became longer, their error values increased. 2. The model teat was installed and measured the error value at the random position. The error value of X and Y coordinates was less than 5㎜, and that of Z coordinates was less than 20㎜. The error value increased as the distance of camera's increased. 3. The equation for distance information acquirement was satisfied with obtaining accurate distance that was necessary for a milking robot to trace teats, A teat recognition algorithm was recognized well four model cow teats. It's processing time was about 1 second. It appeared that a teat recognition algorithm could be used to determine the 3D-distance of the cow teat to develop a RMS.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.21-28
• /
• 2015

Purpose: Although security lights are used to secure pedestrian visibility and safety at nighttime, they can generate light trespass in the neighboring residential space. To prevent this, standards for acceptance limits on vertical illuminance and light pollution by the windows of residential buildings are presented. Method: This study thus representatively selected three types of lamps and, through an evaluation and analysis of the physical and subjective discomfort glare per lamp, proposed a discomfort glare index for each lamp. The evaluation and analysis according to the lamps were conducted through experiments. The variables were the security lights' lamps (NH 100W, MH 70W, LED 50W), installation angles ($0^{\circ}$, $20^{\circ}$), and installation distances (3m, 5m, 7m, 9m). Result: According to the results of the discomfort glare evaluation depending on the angles and distances of the security lights, the following minimum standards are proposed: for NH 100W, a discomfort glare index of 30 and an installation distance of 4m; for MH 70W, a discomfort glare index of 32 and an installation distance of 4m; and, for LED 50W, a discomfort glare index of 31 and an installation distance of 6m, respectively. In addition, this paper recommends the use of MH 70W, when the road width is 4m-6m, and LED 50W, when the road width is over 6m, respectively.

• 생물환경조절학회지
• /
• 제31권1호
• /
• pp.8-13
• /
• 2022

본 연구는 동절기 공정육묘장의 수박 플러그 묘 생산 시, 난방 에너지 절감에 유리한 난방장치인 나노탄소섬유 적외선 난방등의 효율적인 사용을 위한 적정 전력과 설치 간격을 구명하기 위해 수행되었다. 유리온실 내 소형 베드 6개를 플라스틱 필름으로 구획을 나누었으며, 100cm 높이에 700W와 900W 난방등을 설치하였다. 난방등은 설치 간격을 각각 중앙 1개(Control), 60cm 간격(2개), 40cm 간격(3개)으로 설치하였다. 나노탄소섬유 적외선 난방등을 점등한 후 대조구를 제외한 모든 처리에서 설정한 야간 기온(20℃)을 유지하였다. 엽온은 난방등 설치 간격이 좁을수록 빨리 상승하는 경향을 보였다. 나노탄소섬유 적외선 난방등을 사용함에 따른 처리구간 수박 접목묘의 생육에는 뚜렷한 차이가 없었으나, 엽장과 엽폭은 700W 난방등에서 설치 간격이 짧을수록 길어지는 경향을 보였으며, 700W 난방등을 40cm 간격으로 설치하였을 때 묘의 충실도가 높은 값을 나타내는 것을 확인할 수 있었다. 따라서 야간 기온 유지와 묘의 충실도를 고려하였을 때, 700W 난방등을 40cm 간격으로 설치하는 것이 수박 접목묘를 생산하는데 경제성을 고려하여 효율적인 나노탄소섬유 적외선 난방등의 전력과 설치 간격으로 판단된다.