• 분석과학
• /
• 제13권5호
• /
• pp.646-651
• /
• 2000

$TiO_2$ 촉매 하에 염료 Mordant Yellow-12를 광촉매 분해하였다. 이때 사용한 광원은 각각 15-W, 21-W와 26-W 형광 램프를 이용하였다. 분해 정도는 자외선-가시광선 분광기와 pH 메타를 이용하였다. 실험 결과 반응 1시간 후에 각 광원에 따라 각각 17%, 24%, 34% 이상의 분해를 보였고 완전히 분해되는데는 각각 3, 4, 5시간 걸렸다. pH의 변화는 흡광도의 변화와 같이 급격한 결과를 나타내지 않았다. 분해 반응 속도는 15-W 보다 26-W에서 2배의 빠를 분해 반응속도를 보였다.

• Journal of Life Science
• /
• 제11권2호
• /
• pp.83-86
• /
• 2001

The long terminal repeat (LTR) elements of human endogenous retrovirus (HERV) have been found to be coexpressed with genes located nearby. It has been suggested that the LTR elements have contributed to the genetic variation of human genome connected to various diseases. Recently, HERV-W family was identified in the cerebrospinal fluids and brains of individuals with schizophrenia. Using genomic DNAs derived from schizophrenia, we performed PCR amplification and identified six HERV-W LTR elements. Those LTR elements showed a high degree of sequence similarity (87.7-99.5%) with HERV-W LTR (AF072500). Sequence analysis of the HERV-W LTR elements revealed that clone W-sch1 showed identical sequence with the AC003014 (PAC clone RP1-290B4) derived from human Xq23. Clone W-sch2 was closely related to the AC0072442 derived from human Y chromosome by phylogenetic analysis. Our data suggest that new HERV-W LTR elements in schizophrenia may be very useful for further studies to understand neuropsychiatric diseases.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.69-74
• /
• 1999

The microstructure of the reagion of carters, created by Cu and W-Cu shaped charge jets, in a 1020 mild steel target has been intestiaged. The region ahead of the crater created by the Cu shaped charge jet, reveals dramatic grain refinement implying the occurrence of a dynamic recrystallization, while that of W-Cu one dose a martensitic transformation indicative of heating up to an austenitic region followed by rapid cooling.The impacting pressure calculated when the W-Cu shaped charge jet encounters the target is higher than that of the Cu one. The micro-hardness of the region ahead of the crater created by the W-Cu shaped charge jet is also higher than that of the Cu one. The microstructure of W-Cu slug remained in the inside of the craters depicts the occurrence of the remarkable elongation of W particles during the liner collaphse. From these results, the microstructural variation of the region ahead of the crater with Cu and W-Cu shaped charge jets is discussed in trems of the pressure dependency of the transformation region of ferrite and austenite phases.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.235-244
• /
• 2002

The effects of residual impurities on solid state sintering of the powder injection molded (PIMed) W-15wt%Cu nanocomposite powder were investigated. The W-Cu nanocomposite powder was produced by the mech-ano-chemical process consisting of high energy ball-milling and hydrogen reduction of W blue powder-cuO mixture. Solid state sintering of the powder compacts was conducted at $1050^{\circ}C$ for 2~10 h in hydrogen atmosphere. The den-sification of PIM specimen was slightly larger than that of PM(conventional PM specimen), being due to fast coalescence of aggregate in the PIM. The only difference between PIM and PM specimens was the amount of residual impurities. The carbon as a strong reduction agent effectively reduced residual W oxide in the PIM specimen. The $H_2O$ formed by $H_2$ reduction of oxide disintegrated W-Cu aggregates during removal process, on the contrary to this, micropore volume rapidly decreased due to coalescence of the disintegrated W-Cu aggregates during evolution of CO.It can be concluded that the higher densification was due to the earlier occurred Cu phase spreading that was induced by effective removal of residual oxides by carbon.

• 한국분말재료학회지
• /
• 제14권3호
• /
• pp.208-214
• /
• 2007

The microstructure and hardness of (W,Ti)C cemented carbides with a different metallic binder composition of Ni and Co fabricated by powder technology were investigated. The densifications of the prepared materials were accomplished by using vacuum sintering at $1450^{\circ}C$. Nearly full dense (W,Ti)C cemented carbides were obtained with a relative density of up to 99.7% with 30 wt.% Co and 99.9% with 30 wt.% Ni as a metallic binder. The average grain size of the (W,Ti)C-Co and the (W,Ti)C-Ni was decreased by increasing the metallic binder content. The hardness of the dense (W,Ti)C-15 wt%Co and (W,Ti)C-15 wt%Ni, was greater than that of the other related cemented carbides; in addition, the cobalt-based cemented carbides had greater hardness values than the nickel-based cemented carbides.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.67-72
• /
• 1996

This test is verifying for influence of W/P ratio of investment upon dental prosthesis Firstly we made 40 MOD die and divide 4 groups, each group take 0.2 different w/p ratio grade such as 0.35, 0.37, 0.39 and 0.41. The method of data analysis applied were by ANOVA, Tukey test and Mann-Whiney and Kruskal Wallis test. The finding of this study were as follows : 1. The 0.37 w/p ratio group showed most accurte margin due to $15.8{\mu}m$ gap between margin and die which keep up with manufacture's instruction and 0.35 w/p ratio group was followed as second accuracy group o 새 $48.3{\mu}m$ gap between margin and die, 0.39 w/p ratio group showed $101{\mu}m$ gap and 0.41 w/p ratio group showed $129.8{\mu}m$ gap. 2. As to the relationship of the margin accuracy between 4 different grade of w/p ratio groups, each group was statistically significant(P<0.01). Also the all groups were statistically significant except between 0.35 and 0.37 groups between 0.39 and 0.41 groups, and between 0.35 and 0.39 groups. 3. A consequence of Mann-Whitney & Kruskal-Wallis test for marginal accuracy between 4 different grade of w/p ratio was statistically significant as same as above ANOVA test result. Also Tukey test for verifying similarity from each group showed same as above.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.106-108
• /
• 2003

We fabricated Ni and Ni-W alloys for use as a substrate in YBCO coated conductor applications and evaluated the effect of W in Ni on texture, microstructure and surface morphology, and hardness of substrate. Pure Ni, Ni-2 at.％W, and Ni-5at.％W alloy substrates were prepared by plasma arc melting, cold rolling, and the recrystallization heat treatment at various temperature (700- 130$0^{\circ}C$). It was observed that Ni-W alloy substrates had stronger cube texture and maintained it at higher annealing temperature, compared to pure Ni substrate : The full-width at half- maximums of in-plane texture was 13.40$^{\circ}$ for Ni substrate and 4.42$^{\circ}$-5.57$^{\circ}$ for Ni-W substrate annealed at 100$0^{\circ}C$. In addition, it was observed that the Ni-W substrate had smaller grain size, shallower boundary depth, and higher hardness, compared to those of pure Ni substrate.

• 수산경영론집
• /
• 제34권1호
• /
• pp.87-115
• /
• 2003

Korean fisheries societies have had many difficulties for economic, social, and living circumstances. The government has tried many projects to improve these circumstances. But the results of the projects did not come up to his expectation. Recently, blue tourism is emerging as an alternative for improving these circumstances. So we applied a tourism value chain model for identifying what value activities and resources needed. According to the tourism value chain model, it was identified that there were six different value activities, i. e. advertising, reserving, moving, experiencing, returning, and after services of blue tourism. To identify which of the resources are sufficient or not in Korean blue tourism, we compared the required resources with actual ones. It was identified that Korean fisheries societies have so sufficient H/W related resources, but not IT related S/W resources, humanware-based resources, some industrial H/W resources and sociocultural resources. Therefore, Korean blue tourism will be activated, we have to concentrate our efforts on supplementing some scant blue tourism resources, i.e. S/W and humanware related resources and developing a variety of tourism programs to H/W resources. Generally, sustainable tourism needs all of S/W, H/W, and humanware resources. So we suggest several policies for the aspects of S/W, H/W, and humanware resources to activate blue tourism. But before carrying these policies out, they should be tested by field studies. And tourism motivations will be also studied because effective tourism marketing is impossible without an understanding of consumers' motivations.

• 대한화장품학회지
• /
• 제29권1호
• /
• pp.135-150
• /
• 2003

This study is described the stabilizing technology of water-in-oil (w/o) emulsion and the mechanism of emulsification with quaternium-18 hectorite (Q-18 HTRT) by swelling action. When Q-18 HTRT is dispersed in oil, it swells and constructs card-house structure adding ethanol, and formation of water phase is caused by hydrogen bonding. The gelling activities of Q-18 HTRT were excellent such as mineral oil, squalane, cetostearyl isononanoate, isostearic acid, cetyl octanoate, octyl dodecanol and so on. Especially, when oil gel containing Q-18 HTRT passed one to three times by Roll mill. It made the W/O emulsion cream (W/O-ECRM) having 2.0 w/w% of Q-18 HTRT and also produced the control sample (control) including 3.0 w/w% of cetyl PEG/PPG- l0/l dimethicone. The stability of after 24 weeks, Hardness of W/O-ECRM dropped 7.48%, whereas hardness of control went down 57 71%. As a result of these test emulsification of W/O-ECRM is superior compared with control. In cosmetic, 0-18 HTRT can use as suspending agent, oil adsorbent, emulsifying agent, dispersing agent, viscosifier and pigment.

• International Journal of Advanced Culture Technology
• /
• 제7권4호
• /
• pp.236-241
• /
• 2019

This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.