• Kyungpook Mathematical Journal
• /
• 제56권3호
• /
• pp.781-791
• /
• 2016

Let $d_*(1,w)^2 ={\mathbb{R}}^2$ with the octagonal norm of weight w. It is the two dimensional real predual of Lorentz sequence space. In this paper we classify the smooth points of the unit ball of the space of symmetric bilinear forms on $d_*(1,w)^2$. We also show that the unit sphere of the space of symmetric bilinear forms on $d_*(1,w)^2$ is the disjoint union of the sets of smooth points, extreme points and the set A as follows: $$S_{{\mathcal{L}}_s(^2d_*(1,w)^2)}=smB_{{\mathcal{L}}_s(^2d_*(1,w)^2)}{\bigcup}extB_{{\mathcal{L}}_s(^2d_*(1,w)^2)}{\bigcup}A$$, where the set A consists of $ax_1x_2+by_1y_2+c(x_1y_2+x_2y_1)$ with (a = b = 0, $c={\pm}{\frac{1}{1+w^2}}$), ($a{\neq}b$, $ab{\geq}0$, c = 0), (a = b, 0 < ac, 0 < ${\mid}c{\mid}$ < ${\mid}a{\mid}$), ($a{\neq}{\mid}c{\mid}$, a = -b, 0 < ac, 0 < ${\mid}c{\mid}$), ($a={\frac{1-w}{1+w}}$, b = 0, $c={\frac{1}{1+w}}$), ($a={\frac{1+w+w(w^2-3)c}{1+w^2}}$, $b={\frac{w-1+(1-3w^2)c}{w(1+w^2)}}$, ${\frac{1}{2+2w}}$ < c < ${\frac{1}{(1+w)^2(1-w)}}$, $c{\neq}{\frac{1}{1+2w-w^2}}$), ($a={\frac{1+w(1+w)c}{1+w}}$, $b={\frac{-1+(1+w)c}{w(1+w)}}$, 0 < c < $\frac{1}{2+2w}$) or ($a={\frac{1=w(1+w)c}{1+w}}$, $b={\frac{1-(1+w)c}{1+w}}$, $\frac{1}{1+w}$ < c < $\frac{1}{(1+w)^2(1-w)}$).

• 한국재료학회지
• /
• 제8권6호
• /
• pp.545-550
• /
• 1998

6H-SiC와 W의 계면에서 열처리에 따라 일어나는 반응을 X-선 회절분석 및 투과전자현미경을 이용하여 분석하였다. 연구결과 $900^{\circ}C$까지 새로운 상의 형성은 없었고, $1100^{\circ}C$와 $1300^{\circ}C$에서 $W_5Si_3$와 $W_2C$가 형성되어 서로 혼재되어 있으며 반응하지 않은 W은 없음을 관찰하였다. 이는 이미 보고된 W/$\beta$-SiC의 경우와 일치하는 결과로서 이 온도영역에서 $W_5Si_3$와 $W_2C$가 안정상임을 시사하고 있다.

• Fisheries and Aquatic Sciences
• /
• 제15권1호
• /
• pp.69-72
• /
• 2012

Effects of dietary nutrient content on the biological index and serum chemistry of olive flounder Paralichthys olivaceus achieving compensatory growth were investigated. Six treatments were prepared in triplicate. Fish were hand-fed with the control (C) diet twice daily for 8 weeks (8W-C) or fish were starved for 2 weeks and then hand-fed with the C, high protein (HP), high carbohydrate (HC), high lipid (HL), or intermediate protein, carbohydrate and lipid (IPCL) diets for 6 weeks, referred to as 6W-C, 6W-HP, 6W-HC, 6W-HL, and 6W-IPCL, respectively. Weight gain of fish in the 8W-C, 6W-HP, and 6W-IPCL treatments was higher than that of fish in the 6W-C treatment. Condition factor (CF) of the fish in the 6W-HP, 6W-HC and 6W-IPCL treatments was higher than that of fish in the 8W-C and 6W-C treatments. The hepatosomatic index (HSI) of fish in the 6W-HC, 6W-HL and 6W-IPCL treatments was higher than that of the fish in the 8W-C, 6W-C and 6W-HP treatments. Serum chemistry except triiodothyronine ($T_3$) was not significantly different among the treatments. In conclusion, CF and HSI of the fish could be indices reflecting compensatory growth, whereas $T_3$ seemed to play a partial role in achieving compensatory growth.

• Wind and Structures
• /
• 제26권5호
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• 대한수학회지
• /
• 제53권1호
• /
• pp.1-17
• /
• 2016

Let $\mathcal{W}$ be an additive full subcategory of the category R-Mod of left R-modules. We provide a method to construct a proper ${\mathcal{W}}^H_C$-resolution (resp. coproper ${\mathcal{W}}^T_C$-coresolution) of one term in a short exact sequence in R-Mod from those of the other two terms. By using these constructions, we introduce and study the stability of the Gorenstein categories ${\mathcal{G}}_C({\mathcal{W}}{\mathcal{W}}^T_C)$ and ${\mathcal{G}}_C({\mathcal{W}}^H_C{\mathcal{W}})$ with respect to a semidualizing bimodule C, and investigate the 2-out-of-3 property of these categories of a short exact sequence by using these constructions. Also we prove how they are related to the Gorenstein categories ${\mathcal{G}}((R{\ltimes}C){\otimes}_R{\mathcal{W}})_C$ and ${\mathcal{G}}(Hom_R(R{\ltimes}C,{\mathcal{W}}))_C$ over $R{\ltimes}C$.

• 생물환경조절학회지
• /
• 제31권1호
• /
• pp.14-21
• /
• 2022

광질은 묘의 형태를 조절하는 중요한 환경 요인 중 하나이다. warm-white와 cool-white LED의 칩에 비율이 다른 bar type를 제작하여, 백색 LED의 광질에 따른 묘의 생육을 조사하고자 연구를 수행하였다. 오이, 토마토 및 수박의 접수와 대목의 종자를 파종하여, LED를 광원으로 하는 식물공장에서 재배하였다. 처리구는 W1C0(warm-white 단독), W1C1 (warm-white:cool-white=1:1), W3C1 (warm-white:cool-white=3:1), W5C2 (warm-white:cool-white=5:2)이다. 모든 처리구에서 W1C1 처리구에서 재배한 묘목의 배축장이 가장 짧았으며, W1C0에서 재배된 묘목의 배축장이 가장 길었다. 수박 접수, 수박 대목, 그리고 토마토 대목의 배축장은 W1C1, W3C1, W5C2, W1C0 순이었으며, 이는 cool-white의 비율이 높은 순서와 같았다. 토마토 접수는 각각 W1C0과 W3C1에서 첫 번째와 두 번째로 배축이 길었고 W5C2와 W1C1에서 가장 짧았으며, 통계적 차이는 없었다. 경경은 토마토 접수, 토마토 대목 및 수박 대목을 제외하고는 큰 차이가 없었다. 토마토 접수, 토마토 대목 및 수박 대목의 줄기 직경은 W1C0에서 가장 굵었다. 오이, 수박의 접수와 대목의 지상부 생체중과 오이 접수의 지하부 생체중은 W1C1에서 가장 작았다. 본 연구를 통해 LED 광원의 다양한 비율은 묘목의 배축 신장에 크게 영향을 미치는 것을 확인하였다.

• 한국정보전자통신기술학회논문지
• /
• 제12권5호
• /
• pp.499-506
• /
• 2019

본 논문은 SiC Hybrid module를 적용한 7kW 인버터의 동작 안정성에 관한 것으로 손실 방정식과 시뮬레이션 결과를 비교하여 시뮬레이션 결과의 유효성을 검증하였으며, 시뮬레이션을 통해 Si module과 SiC Hybrid module의 스위치 손실과 다이오드 손실을 비교하였다. 손실 방정식 계산을 통하여 SiC Hybrid module의 도통 손실은 168W, 스위칭 손실은 9.3W, 다이오드 손실은 10.5nW의 결과를 나타내었으며, 시뮬레이션 결과와 비교하였을 때 유사한 값을 나타내었다. 이를 바탕으로 Si module과 SiC Hybrid module의 시뮬레이션 결과 값 비교 결과, Si module의 총 소자 손실값은 246.2W, SiC Hybrid module의 총 소자 손실 값은 189.9W를 나타내었으며, 손실 차이 값은 56.3W로써 약 0.8W의 효율 차이를 보였다. 이로 인하여 SiC SBD의 Reverse recovery 특성을 검증하였다. 또한 고온 포화상태에서 SiC Hybrid module 및 Si module의 안정성을 확인하기 위하여 온도 포화 테스트를 진행하였으며, Si module의 경우, 출력전력 4kW에서 동작을 멈추었고, SiC Hybrid module은 7kW까지 동작을 확인하였다. 이를 바탕으로, 효율 그래프와 온도 그래프를 제시하였으며, Si module은 4kW까지, SiC Hybrid module은 7kW까지 그래프로 나타내었다.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.415-421
• /
• 2014

W-10vol.%ZrC composites reinforced by micrometric and nanosized ZrC particles were prepared by hot-pressing of 25 MPa for 2 h at $1900^{\circ}C$. The effect of ZrC particle size on microstructure and mechanical properties at room temperature and elevated temperatures was investigated by X-ray diffraction analysis, scanning electron microscope and transmission electron microscope observations and the flexural strength test of the W-ZrC composite. Microstructural analysis of the W-ZrC composite revealed that nanosized ZrC particles were homogeneously dispersed in the W matrix inhibiting W grain growth compared to W specimen with micrometric ZrC particle. As a result, its flexural strength was significantly improved. The flexural strength at room temperature for W-ZrC composite using nanosized ZrC particle being 740 MPa increased by around 2 times than that of specimen using micrometric ZrC particle which was 377 MPa. The maximum strength of 935 MPa was tested at $1200^{\circ}C$ on the W composite specimen containing nanosized ZrC particle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권8호
• /
• pp.1148-1156
• /
• 2011

Compensatory growth of juvenile olive flounder Paralichthys olivaceus fed different diets with different feeding regime was compared. Four hundred fifty fish (twenty five fish per tank) were randomly distributed into 18 of 180 L flow-through tanks. Six treatments were prepared: fish were hand-fed with the control (C) diet to satiation twice a day, six days a week, for 8 weeks (C-8W treatment); and other groups of fish were starved for 2 weeks and then fed with the C, high protein (HP), high carbohydrate (HC), high lipid (HL), and combined protein, carbohydrate and lipid (CPCL) diets to satiation twice a day, six days a week, for 6 weeks, referred to as C-6W, HP-6W, HC-6W, HL-6W, and CPCL-6W treatments, respectively. Final body weight of fish in HP-6W treatment was higher than that of fish in C-6W, but not different from that of fish in C-8W, HC-6W, HL-6W and CPCL-6W treatments. Specific growth rate of fish in HP-6W treatment was higher than that of fish in all other treatments except for fish in CPCL-6W treatment. Feeding rate of fish in C-8W treatment was higher than that of fish in HP-6W, HC-6W, HL-6W and CPCL-6W treatments, but not different from that of fish in C-6W treatment. In addition, feeding rate of fish in C-6W treatment was higher than that of fish in HP-6W, HL-6W and CPCL-6W treatments. Feed and protein efficiency ratios of fish in HP-6W, HC-6W, HL-6W and CPCL-6W treatments were higher than those of fish in C-6W treatment. None of moisture, crude protein and ash content of the whole body of fish excluding the liver was different among treatments. Dietary supplementation of protein, carbohydrate, lipid and their combination could improve compensatory growth of fish when fish were fed for 6 weeks after 2-week feed deprivation; especially, supplementation of dietary protein was the most effective to improve compensatory growth of fish.

• 한국자기학회지
• /
• 제18권1호
• /
• pp.32-35
• /
• 2008

차세대 반도체 산업의 발전을 위하여 반도체 소자의 구조는 DRAM, FRAM, MRAM 등 여러 분야에서 다양한 연구가 진행되고 있다. 특히 이런 차세대 반도체 소자에서 금속 배선으로는 Cu가 사용되며, Cu 금속 배선을 위한 확산방지막에 대한 연구는 반드시 필요하다[1-3]. Cu 금속 배선을 위한 확산방지막에 대한 현재까지의 연구에서는 Tungsten(W)을 기반으로 Nitride(N)를 불순물로 첨가한 확산방지막에 대하여 연구되었다[4-7]. 이러한 W-N를 기반으로 본 연구에서는 물리적 기상 증착법(PVD) 방법인 RF Magnetron Sputter 방법으로 W-N 이외에 Carbon(C) 과 Boron(B)을 첨가하여 확산방지막의 특성을 확인하였고, 특히 Boron Target의 power를 변화하여 W-B-C-N 확산방지막의 Boron에 의한 특성과 열적 안정성을 연구하였다[8-10]. 실험은 다양한 Boron의 조성을 가지는 확산방지막을 증착하여 $\beta$-ray와 4-point probe를 사용하여 확산방지막의 특성을 확인하였고, 고온($700^{\circ}C{\sim}1000^{\circ}C$) 열처리한 후 X-ray Diffraction 분석을 하여 열적 안정성을 확인하였다.