• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.30-37
• /
• 2000

Wet porous media representing agronomic soil that contains variable water content with variable electrolyte concentration was measured to study the shape of the curves of the electric double layer capacitance versus frequency (from 10 KHz to 10 MHz. This was done in an attempt to find the lowest practical operating frequency for developing low cost dielectric constant soil moisture probes. Cellulose sponge was used as the porous media. A high frequency electronic bridge circuit was developed for measuring the equivalent network parallel resistance and capacitance of porous media. It appears that the effects of the electric double layer component of the total parallel network capacitance essentially disappear at operating frequencies greater than approximately 25 MHz at low electrolyte concentrations but are still important at 50 MHz at higher concentrations. At these frequencies, the double layer capacitance masks the diffusion region capacitance where true water content capacitance values reside. The general shape of the curve of volumetric water content versus porous media dielectric constant is presented, with an empirical equation representing data for this type of curve. It was concluded that the lowest frequency where dielectric constant values which represent true water content information will most likely be found is between 30 and 50 MHz at low electrolyte concentrations but may be above 50 MHz when the total electrolyte concentration is near the upper level required for most mesophyte plant nutrition.

• Agricultural and Biosystems Engineering
• /
• 제2권2호
• /
• pp.63-68
• /
• 2001

The objective of this study was to develop a real-time soil moisture meter using RF impedance. The impedance suchas capacitance and resistance (or conductance) was analyzed using parallel cylinder type capacitance probe(C-probe) and Q-meter (HP4342). The capacitance and conductance of soil increased as volumetric water content increased. The 5 MHz of modified Colpitts type crystal oscillator was designed to detect the capacitance change of the C-probe with moist soil. A third order polynomial regression model was proposed to describe the relationship between RF impedance and volumetric water content. The prototype real time moisture meter consisted of the C-probe, sample container, oscillator, frequency counter and related signal processing units. The calibration equation for measurement of volumetric moisture content of soil was developed and validated. The correlation coefficient and root mean square error between measured volumetric water content by oven method and predicted values by prototype moisture meter for unknown soil samples were 0.984 and 0.032$cm^3$$cm\^3$, respectively.

• Carbon letters
• /
• 제22권
• /
• pp.70-80
• /
• 2017

Activated carbons (ACs) have been used as electrode materials of electric double-layer capacitors (EDLC) due to their high specific surface areas (SSA), stability, and ecological advantages. In order to make high-energy-density ACs for EDLC, petroleum pitch (PP) pre-carbonized at $500-1000^{\circ}C$ in $N_2$ gas for 1 h was used as the electrode material of the EDLC after KOH activation. As the pre-carbonization temperature increased, the SSA, pore volume and gravimetric capacitance tended to decrease, but the crystallinity and electrode density tended to increase, showing a maximum volumetric capacitance at a medium carbonization temperature. Therefore, it was possible to control the crystalline structure, SSA, and pore structure of AC by changing the pre-carbonization temperature. Because the electrode density increased with increasing of the pre-carbonization temperature, the highest volumetric capacitance of 28.4 F/cc was obtained from the PP pre-carbonized at $700^{\circ}C$, exhibiting a value over 150% of that of a commercial AC (MSP-20) for EDLC. Electrochemical activation was observed from the electrodes of PP as they were pre-carbonized at high temperatures above $700^{\circ}C$ and then activated by KOH. This process was found to have a significant effect on the specific capacitance and it was demonstrated that the higher charging voltage of EDLC was, the greater the electrochemical activation effect was.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.186-191
• /
• 2012

DC Bus Electrolytic capacitors have been widely used in power conversion system because they can achieve high capacitance and voltage ratings with volumetric efficiency and low cost. This type of capacitors have been traditionally used for filtering, voltage smoothing, by-pass and other many applications in power conversion circuits requiring a cost effective and volumetric efficiency components. Unfortunately, electrolytic capacitors are some of the weakest components in power electronic converter. Many papers have proposed different methods or algorithms to determinate the ESR and/or capacitance C for fault diagnosis of the electrolytic capacitor. However, both ESR and C vary with frequency and temperature. Accurate knowledge of both values at the capacitors operating conditions is essential to achieve the best reference data of fault judgement. According to parameter analysis, the capacitance increases with temperature and the ESR decreases. Higher frequencies make the ESR and C to decrease. Analysis results show that the proposed electrolytic capacitor parameter estimation technique can be applied to reference signal of capacitor diagnosis systems successfully.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.65-68
• /
• 2001

This study was conducted to develop a soil moisture meter using capacitance probe. A parallel cylinder type capacitance probe (C-probe) was fabricated The 5 MHz of crystal oscillator was constructed to detect the capacitance change of the C-probe with moist soil. A third order polynomial regression model for volumetric water content having oscillation frequency changes at 5 MHz as independent variables presented the determination coefficient of 0.979 and root mean square error of $0.031\;cm^{3}cm^{3}$ for all soil samples. A prototype soil moisture meter consisting of the sample container, C-probe, oscillator, frequency counter and related signal procession units presented the correlation coefficient of 0.987 and the root mean square error of $0.032\;cm^{3}cm^{3}$ as compared with the oven drying method for unknown soil samples.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.918-924
• /
• 1997

A method for measuring the accuracy of rotating objects was studied. Rotating axis errors are significant; such as the spindle error of a manufacturing machine which results in the surface roughness of machined work pieces. Three capacitance type displacement sensors were used to measure the rotating master ball position. The sensors were mounted to the three orthogonal points on the spindle axis. The measurement data were analyzed and shown for rotating spindle accuracy, not only for average roundness error but also for spindle volumetric positional error during the revolutions. This method is simple and economical for industrial field use with regular inspection of rotating machines using portable equipment. Measuring and analyzing time using this method takes only a couple of hours. This method can also measure microscopic amplitude and 3-dimensional direction of vibrating objects.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• 생물환경조절학회지
• /
• 제28권4호
• /
• pp.366-375
• /
• 2019

본 실험은 토마토(Solanum lycopersicum L. 'Hoyong' 'Super Doterang') 암면재배에서 배지 전체의 정전용량을 측정할 수 있는 장치(Substrate capacitance measurement device, SCMD)를 기반으로 한 적정 급액 방법을 구명하기 위하여 누적일사량 제어구(Integrated solar radiation automated irrigation, ISR)와 물관수액흐름 제어구(sap flow automated irrigation, SF)를 대조구로 비교하면서 봄부터 여름철과 겨울철에 재배를 실시하였다. SCMD 제어구는 급액 개시 후 배지 한 개당 설정된 배액 목표량이 처음 발생하는 시점까지 10분간격으로 급액하였고 첫 배액이 배출되면 그 때의 배지의 정전용량(Capacitance)을 100%로 간주하고 그 기준치의 급액제어점(Capacitance threshold, CT)에 도달하면 급액 되었고 그 뒤 목표 배액량이 발생하면 급액이 멈추는 방식으로 제어되었다. 봄부터 여름재배에서 실험 처리를 위해 SCMD제어구의 일회 급액량 (Irrigation volume per event)을 50, 75, 또는 100mL로 설정하였고 겨울철 재배에서는 CT가 0.65, 0.75, 또는 0.90가 되면 급액 되도록 설정하였다. 봄부터 여름철 재배에서 일회 급액량을 50, 75, 100mL로 설정하였을 때 급액 횟수는 각각 39, 29, 19회였고 배액율은 각각 3.04, 9.25, 20.18%였다. 겨울철 재배에서 CT를 0.65, 0.75, 0.90로 설정하였을 때 급액횟수는 각각 5.67, 6.50, 14.67회였고 배액율은 9.91, 10.78, 35.3%였다. 봄부터 여름철 재배에서 일회 급액량 처리에 따른 물관수액흐름속도(SF) 변화는 1회 급액량과 배액량을 각각 50과 75mL로 제한한 경우 100mL로 제한한 경우와 비교하여SF 신호가 외부 광량 신호 (SI) 보다 늦어지는 경향(time lag)을 보였고 겨울철 재배에서 CT를 0.65로 설정한 경우는 물관수액흐름 속도나 함수율이 매우 낮아졌고 CT를 0.90로 설정한 경우는 함수율과 물관수액흐름 속도는 매우 높았으나 많은 배액이 배출되었다. 따라서 토마토 봄부터 여름철 재배에서 SCMD를 활용하여 CT를 0.9로, 배지 한 개당 배액 목표량을 100mL로 설정하였을 때 일회 급액량은 75~100mL 범위가 적합하고 겨울철 재배에서는 1회 급액량을 75mL로, 배액 목표량을 70mL로 설정하였을 때 CT는 0.75이상 0.9이하 범위가 적합할 것으로 판단되었다. 앞으로 정전용량 값과 배지 용적수분함량의 관계성을 구명하고 보정계수를 구하는 연구가 필요할 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.369-376
• /
• 2003

This study was conducted to develop a precision measurement method of water content in soil (find sand and silty sand) using dual RF impedance changes. The electrically stable perpendicular plate capacitive sensor was fabricated and utilized to sense the water content in soil. Crystal oscillators of 5 and 20 MHz and related circuits were designed to detect the capacitance changes of a perpendicular plate capacitive sensor with soil samples at various volumetric water contents. A multiple regression model for volumetric water content having dual oscillation frequency changes at 5 and 20 MHz as independent variables resulted in coefficient of determination of 0.963 and standard error calibration of 0.030 cm$^3$/cm$^3$ for calibration and coefficient of determination of 0.966, standard error of prediction of 0.027 cm$^3$/cm$^3$ and bias of 0.001 cm$^3$/cm$^3$ for prediction.

• 대한화학회지
• /
• 제59권1호
• /
• pp.36-44
• /
• 2015

본 논문은 layer-by-layer 자가조립법을 이용해서 polyaniline(PANi), graphene oxide(GO) 및 phytic acid(PA)으로 구성된 $(PANi/GO/PANi/PA)_{10}$ 다층을 제작하고, 전기화학적 방법을 활용하여 GO를 ERGO으로 환원하여 완성된 $(PANi/ERGO/PANi/PA)_{10}$ 다층 필름 전극의 전기화학적 특성을 분석하였다. 특히 이 과정에 다층 필름 전극 내에서 고리형 다인산 화합물 나노입자가 PANi을 도핑함과 동시에 전극 내부에 다공성과 표면적을 높여서 $(PANi/ERGO)_{20}$ 전극의 용적 커패시턴스를 개선할 수 있는 지를 조사하였다. 다층 필름 전극의 전기화학적 특성은 1 M $H_2SO_4$ 전해질 하에서 삼 전극 시스템을 이용하여 측정되었다. 그 결과, $(PANi/ERGO)_{20}$ 전극은 $1A/cm^3$ 전류밀도에서 $666F/cm^3$의 용적 커패시턴스을 보여주었고, $(PANi/ERGO/PANi/PA)_{10}$ 전극은 $769F/cm^3$에 해당되는 개선된 용적 커패시턴스를 보여주었다. 또한 1000 사이클 이후에도 초기 커패시턴스의 79.3%의 순환 안정성을 유지하였다. 이와 같이 공액성 구성성분들이 서로 포개져서 밀집되게 형성된 $(PANi/ERGO)_{20}$ 전극 내부에 고리형 다인산 화합물 나노입자를 이용한 구조변환을 통해서 전극의 전기화학적 특성을 개선할 수 있음을 확인하였다.