• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.480-486
• /
• 1995

Turbulent flow field in a subchannel of bare rod bundles has been numerically simulated using the control volume based finite element method. Launder & Ying model of Reynolds stress and Lam & Bremhorst low-Reynolds number model are implemented in k-$\varepsilon$ equations and momentum equations. Secondary flows are simulated using the stream function and vorticity approach. The control volume based finite element method enable to use the upwind scheme (donor cell scheme). Sensitivity of the constants in the models are studied, and proper values are found to get the close result to the measured flow distributions.

• Water Engineering Research
• /
• 제3권3호
• /
• pp.155-162
• /
• 2002

This study presents the theoretical approach for volume concentration, velocity profile, and granular discharge on the fluid-granule mixed flow downstream of the scour hole at the outlet of the hydraulic structure. Concept of dilatant model was applied for the stress-strain relationships of fluid-granule mixed flow since the flow downstream of the scour hole corresponds to debris flow, where momentum transfers through particle collisions. Mathematical formulations were derived using momentum equation and stress-strain relation of the fluid-granule mixture. Velocity profile under the assumption of uniform concentration over flowing layer showed the downward convex type. Deposition angle of downstream hump was found to be a function of an upstream slope angle, a dynamic friction angle and a volume concentration irrespective of flow itself, Granular discharge and the overflow depth were obtained with given values of inflow rates. Experimental results showed relatively good agreements with theoretical ones.

• 한국주조공학회지
• /
• 제37권6호
• /
• pp.199-206
• /
• 2017

In this study, the variations of microstructures and tensile properties of Ti-(44-54)at.%Al binary alloys were investigated. The heat-treated microstructure depended greatly on their solidification structure and annealing temperature. We measured the variations of volume fractions of primary and secondary lamellar structure as a function of the heat treatment temperature in a Ti-47at.%Al alloy. The variation of ductility as a function of Al content was in good agreement with the change of fracture mode in the tensile fracture surface. It can be inferred that the variations of yield stress and hardness of ${\gamma}$ phase in a single ${\gamma}$-phase field region are enhanced by anti-site defects created by deviations from the stoichiometric composition. In a Ti-47at.%Al alloy within the (${\alpha}_2+{\gamma}$) two-phase field, the yield stress tended to be the maximum at a near equal volume fraction of lamellar and ${\gamma}$ grains. The ductility depended sensitively on the overall grain size and Al content. The calculation of fracture strain using Chan's model indicated that the change of ductility as a function of annealing temperature was primarily determined by the variations in the overall grain size and lamellar volume fraction.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.160-170
• /
• 2006

If hydraulic pump controlled by mechanical type regulator has more than one control function, the construction of regulator will be very complicated and control performance falls drastically. It is difficult to have more than one control function for hydraulic pump controlled by electronic type hydraulic valve due to the inconsistency of controllers. This paper proposes a multi-function control technique which controls continuously flow, pressure and power by using EPPR(Electronic Proportional Pressure Reducing) valve in swash plate type axial piston pump. Nonlinear mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. A reaction spring is installed in servo cylinder to secure the stability of the control system. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.652-657
• /
• 2007

This paper is an interim report on the investigation of thermodynamic properties of $CO_2$/oil mixture refrigerant. First, liquid density of POE (poly-ol ester) and PAG (poly alkylene glycol) were measured and expressed as a function of temperature. Then, a solubility equation was developed which enables us to calculate the weight fraction of $CO_2$ for the mixture in a liquid state. An experimental apparatus with a cell was constructed to measure P-$\upsilon$-T-$\chi$ data for $CO_2$/oil mixture. The volume of the cell was determined using a certain formula considering change in volume as a function of temperature and pressure. Then, experimental data were obtained over the temperatures $40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$ and $80^{\circ}C$ with various mole fractions. Finally, assuming a primitive model of ideal gas, the volume of $CO_2$/oil mixture was predicted with a relatively larger error of 5.05% for $CO_2$/PAG and 8.81% for $CO_2$/POE. The volume of $CO_2$/oil mixtures would be better predicted using an appropriate equation of state, of which results will be reported soon.

• Journal of the Korean Data and Information Science Society
• /
• 제16권2호
• /
• pp.237-253
• /
• 2005

In Korea, the volume of insurance industry has been increased rapidly with helping the economic growth, the increment of GNP and derive of public welfare policy. But the other side of the volume increment, the life insurers have some problems, such as the high rate of turnover, lapses and surrenders, in processing of acquiring more insurance contracts. The object of this paper is the analysis of the causes and properties of the high rate of turnover, lapses and surrenders using statistical survival model. Also we hope that the insurers will use the results of analysis to reduce the rates.

• 대한의생명과학회지
• /
• 제29권4호
• /
• pp.263-273
• /
• 2023

This study aimed to investigate effect of scalp acupuncture (SA) and repetitive transcranial magnetic stimulation (rTMS) intervention on neuromotor function in photothrombotic cerebral infarction (PCI) rat model. Sixty male SD rats were used. PCI was induced on M1 cortex of right frontal lobe. SA was performed at the Qianding (GV21), Xuanli (GB6) acupoints of ipsilesional M1. Low-frequency rTMS was delivered to contralesional M1. All rats were randomly divided into 4 groups: group A, normal (n, 15); group B, PCI without any stimulation intervention (n, 15); group C, PCI with SA (n, 15); group D, PCI with rTMS (n, 15). Rota-rod test and Ladder rung walking test (LWT) were done weekly for 8 weeks after PCI. SA or rTMS was started from post-PCI 4^th day as protocol for 8 weeks. H/E stain and IHC were done. Western blot and qRT-PCR study were performed for MAP2 and BDNF from ipsilesional M1 peri-infarction tissue. Brain MRI study was conducted to quantify the volume of cerebral infarction. As a result, left forelimb and hindlimb function significantly improved more in group C and D than control group, with expressed more BDNF and MAP2. And brain MRI showed focal infarction of right M1 after PCI, and infarction volume progressively decreased in group C and D than group B from post-PCI 5^th to 8^th week. SA or rTMS was more effective than no intervention group on neuromotor function of PCI rat model. The functional recovery was associated with stimulation intervention-related neurogenesis.

• 한국항만경제학회지
• /
• 제23권1호
• /
• pp.1-18
• /
• 2007

본 연구에서는 환율의 컨테이너 물동량에 대한 영향의 비중을 고려하여 외환위기 이후 환율변동성이 커짐에 따라 컨테이너 물동량도 상당히 영향을 받은 것으로 예상되기 때문에 환율변동성의 컨테이너 물동량에 대한 장 단기적 영향을 체계적으로 분석하고 시사점을 도출하고자 한다. 환율변동성을 도출하기 위하여 GARCH 모형을 이용하여 우리나라의 환율 변동성 모형을 분석한다. 물론 구축된 모형을 분석하기 이전에 설정된 변수들과 모형의 안정성 검정을 위하여 단위근 검정과 공적분 검정을 실시한다. 또한 환율의 변동성이 컨테이너 물동량에 미치는 동태적 영향을 보기 위해 오차수정모형과 충격반응 및 분산분해를 실시하고 마지막으로 결론과 시사점을 도출한다. 분석결과 환율변동성을 포함시킨 컨테이너물동량함수를 회귀 분석한 결과 추정계수가 모두 이론적 예상과 부호가 일치하고 통계적 유의성도 높은 것으로 나타났다. 환율변동성은 우리나라의 컨테이너 물동량에 부(-)의 영향을 미치는 것으로 나타났다. 환율변동에 의한 불확실성이 예상됨으로써 위험기피에 의하여 무역과 생산이 감소하고 이에 따라 컨테이너 물동량도 영향을 받은 것으로 판단된다. 오차수정모형에 근거한 인과관계 검정에서 단기와 장기 모두 환율변동성에서 컨테이너 물동량간의 일방적 인과관계가 존재하였다. 또한 충격반응함수에서 나타난 바와 같이 환율변동성 충격에 대하여 컨테이너 물동량은 부(-)의 영향을 받으며 그러한 부의 효과는 비교적 짧은 기간 내에 안정적인 추세로 수렴된다. 예측오차의 분산분해의 결과는 환율변동성과 실질환율이 컨테이너 물동량의 분산에 상당한 영향을 미치고 있음을 알 수 있다.

• KIEAE Journal
• /
• 제9권1호
• /
• pp.107-113
• /
• 2009

The energy cost is resulted from the energy use. Its sources are divided into some types and depended on the building use or energy-use type. The energy cost should be affected by the amount of the energy use. The cost could be calculated to consider various factors such as the insulation, heating type, building shape and others. But it can not consider all of the affect factors to the energy cost and need to categorize the factors to the condition for estimating the cost. In this paper, it aimed at providing the estimation model in linear equation and multiple linear regression, utilizing the building exterior condition and management characteristics in apartment housing. Its survey are conducted in two parts of management characteristics and building exterior condition. The correlation analysis is conducted to get rid of the multicolinearity among the inputted factors. The number of linear equation model is 11 and includes the 1st, 2nd and 3rd equation function, power function and others. Among these, it suggested the 2nd and 3rd function and power function in terms of the statistics. In multiple linear regression model, the building volume and management area are inputted to the estimation.