• Journal of the Korean Society of Visualization
• /
• v.12 no.1
• /
• pp.25-29
• /
• 2014

The outlet flow of the centrifugal blower were quantitatively visualized using particle image velocimetry. Because the centrifugal blower is one of the key parts of electric vehicle battery cooling system, the quantitative information of centrifugal blower is necessary to design and optimize the cooling system. The effect of different inlet flow condition to the outlet flow was investigated in this study. Two different inlet ducts were used. One is the straight inlet and the other is a bended one. The results clearly showed the outlet flow asymmetry in both inlet ducts. When the blower has the bended inlet, the flow rate decreases due to the increase of the head loss.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.69-76
• /
• 2020

In the present study, we investigate the flow separation characteristics of a paraglider canopy model by tuft visualization. The experiment is conducted at Re = 3.3×105 in a wind tunnel large enough to contain the three-dimensional paraglider canopy model, where Re is Reynolds number based on the mean chord length and the free-stream velocity. The flow separation characteristics of the canopy model near the wing root are similar to those of a two-dimensional airfoil with a cross-section similar to the model. On the other hand, near the wingtip region, the flow separation is suppressed by the downwash induced by the wingtip vortex. As a result, as the angle of attack increases, the flow separation occurs from the wing root region of the canopy model and develops toward the wingtip.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.443-448
• /
• 2006

본 논문에서는 고화질 협업 환경에서 다수의 고화질 영상들을 처리하기 위한 타일드 디스플레이(tiled display)기반의 확장성있는 디스플레이 구조를 제안한다. 제안하는 구조는 대형 고화질 디스플레이를 제어하기 위한 기술과 다수의 고화질 영상을 제한된 시스템 자원을 이용하여 효율적으로 디스플레이 하기위한 기술을 다룬다. 제안된 시스템은 영상의 획득/디코딩/디스플레이와 같은 가시화를 담당하는 Scalable Visualization Consumer 로 명명된 확장형 가시화 응용을 포함한다. 제안된 기법들을 토대로 구현된 확장형 가시화 시스템의 성능을 평가하고자 한다.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.2
• /
• pp.80-85
• /
• 2014

In this study, we visualized the internal flow of a regenerative turbomachinery using the direct injection tracer method. For visualization, the working fluid was water and the tracer was oil colors (marbling colors). Droplets were injected at the inlet of the machinery and the streak were recorded using a high-speed camera with high-power light sources. While circulating inside the groove, the droplets were translated by the rotational motion of the impeller. When the droplets flow out of the impeller groove, relative to the impeller, they moved more slowly. And the droplets repeatedly reentered into the groove and circulated again. Then the droplets either flowed to the outlet or to the stripper. As a result, this experiment has confirmed the internal circulating flow of a regenerative turbomachinery.

• International Journal of Contents
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2017

Abnormal data in the manufacturing process makes it difficult to find useful information that can be applied in data management for the manufacturing industry. It causes various problems in the daily process of production. An issue from the abnormal data can be handled by our method that uses big data and visualization. Visualization is a new technology that transforms data representation into a two-dimensional representation. Nowadays, many newly developed technologies provide data analysis, algorithm, optimization, and high efficiency, and they meet user requirements. We propose combined production of the data visualization approach that uses integrative visualization of sources of abnormal pattern analysis results. The perceived idea of the proposed approach can solve the problem as it also works for big data. It can also improve the performance and understanding by using visualization and solving issues that occur in the manufacturing process with a calendar heat map.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.530-534
• /
• 2007

Flow visualization is one of visualization techniques and it means a visual expression of vector data using 2D or 3D graphics. It aims for human to easily understand a special feature of the vector data. Flow visualization can be classified into various criterions such as visualization technique, data dimension, type of the flow, and so on. Visualization technique can be categorized into direct method, integration method and derived data based method. Data dimension can be divided into 2D, 2.5D and 3D. Type of flow data may be classified into steady and unsteady. In this paper, various LIC based flow visualization methods will be introduced which is one of representative integration based techniques. Those methods will be categorized with more detailed criterions such as dimension and type of flows.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.27-37
• /
• 2018

Streamline generation is one of the most representative visualization methods to analyze the flow stream of fluid dynamics dataset. It is a challenging problem, however, to determine the seed locations for effective streamline visualization. Meanwhile, it needs much time to compute effective seed locations and streamlines on the massive flow dataset. In this paper, we propose not only an importance based method to determine seed locations for the effective streamline placements but also a parallel streamline visualization method on the distributed visualization system. Moreover, we introduce case studies on the real fluid dynamics dataset using GLOVE visualization system to evaluate the proposed method.

• Archives of Plastic Surgery
• /
• v.48 no.4
• /
• pp.427-432
• /
• 2021

The conventional approach of looking down a microscope to perform microsurgical procedures is associated with occupational injuries, anti-ergonomic postures, and increased tremor and fatigue, all of which predispose microsurgeons to early retirement. Recently, three-dimensional (3D) visualization of real-time microscope magnification has been developed as an alternative. Despite its commercial availability, no supermicrosurgical procedures have been reported using this technology to date. Lymphovenous anastomoses (LVAs) often require suturing vessels with diameters of 0.2-0.8 mm, thus representing the ultimate microsurgical challenge. After performing the first documented LVA procedure using 3D-augmented visualization in our unit and gaining experience with this technique, we conducted an anonymized in-house survey among microsurgeons who had used this approach. The participants considered that 3D visualization for supermicrosurgery was equivalent in terms of handling, optical detail, depth resolution, and safety to conventional binocular magnification. This survey revealed that team communication, resident education, and ergonomics were superior using 3D digital hybrid visualization. Postoperative muscle fatigue, tremor, and pain were also reduced. The major drawbacks of the 3D visualization microscopic systems are the associated costs, required space, and difficulty of visualizing the lymphatic contrast used.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1482-1494
• /
• 2013

As the result of this research, the user platform, which reflects the latest interface technology, supports the ideal interface environment in a future city through using the data from social media. The goal of this research is constructing the user interface platform to approach to the data in an easier and practical condition of the interface environment smart space of the future intelligent city for user. It constructs the main module to organize the platform. Interface user platform modules, which were all based on visualization of service, are constructed by visualization agents, visualization social networks, visualization icons, visualization services, visual data, visual maps and visual classes. In this research, by the variety of services including delivering information, to find the interface environment for the proper interface technology, this research suggests "Interface User Platform" as the result.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1427-1434
• /
• 2017

Due to the acceleration of the 4th industrialization, the data around us rapidly increased. Therefore, it is necessary to be able to more easily grasp the nature and meaning of data obtained through data analysis than to collect data, and apply it flexibly to the value judgment of data. Visualization technology is now attracting attention in many fields. Visualization allows the user to more easily grasp the information of the data with graphs, charts, etc. so that the data analysis result can be understood more easily, so that the user can make an immediate judgment and make a quick decision. Among them, there is a high degree of interest in visualization using public data, which is highly useful to users. In this paper, we implemented R - library and R Studio to visualize public data at the installation sites of bicycle storage sites among various software that can express visualization.