• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.104-104
• /
• 2011

ZnO는 3.37 eV의 넓은 에너지 밴드갭을 갖는 투명 전도성 반도체이며 우수한 전기적, 광학적 특성으로 인해 광원소자 개발을 위한 새로운 물질로 많은 주목을 받아왔다. 더욱이, ZnO는 쉽게 나노구조 형성이 가능하기 때문에 이를 응용한 가스센서, 염료감응태양전지, 광검출기 등의 소자 개발이 활발히 이루어지고 있다. 최근에는 GaN 기반 발광다이오드 (light emitting diode, LED)의 광추출 효율을 향상시키기 위한 ZnO 나노구조 응용에 관한 연구가 보고되고 있다. GaN 기반 LED의 경우 반도체 물질과 공기 사이의 높은 굴절률 차이로 인하여 낮은 광추출 효율을 나타낸다. 이를 해결하기 위한 방법으로 표면 roughening, texturing 등 에칭공정을 이용해 광추출 효율을 개선하려는 연구들이 보고되고 있으나, 복잡한 공정과정을 필요로 하고 에칭공정에 의한 소자 표면 손상으로 전기적 특성이 나빠질 수 있다. 반면 전기화학증착법으로 성장된 ZnO 나노구조를 이용할 때, 보다 간단한 방법으로 쉽고 빠르게 나노구조를 형성할 수 있고 낮은 공정온도를 가지기 때문에 소자의 전기적 특성에 큰 영향을 주지 않는다. 수직방향으로 잘 정렬된 ZnO 나노구조를 갖는 LED의 경우 내부 Fresnel 반사 손실을 효과적으로 줄여 발광 효율을 크게 향상시킬 수 있다. 따라서, ZnO 나노구조의 성장제어 및 성장특성을 분석하는 것은 매우 중요하다. 본 연구에서는 ITO glass 위에 ZnO 나노구조를 성장하고 그 특성을 분석하였다. ITO glass 기판 위에 RF magnetron 스퍼터를 사용하여 Al 도핑된 ZnO (AZO)를 얇게 증착한 후 전기화학증착법으로 ZnO 나노구조를 성장하였다. 농도, 인가전압, 공정시간 등 다양한 공정조건을 변화시키면서 성장 메커니즘을 분석하였고, scanning electron microscope (SEM) 및 X-ray diffraction (XRD)을 통하여 구조 및 결정성 등을 분석하였다. 또한, UV-Visible-NIR spectrophotometer를 사용하여 투과율을 실험적으로 측정하여 ZnO 나노구조의 광학적 특성을 분석하였고, rigorous coupled wave analysis (RCWA) 방법을 사용하여 계면에서 발생하는 내부 반사율을 계산함으로써 나노구조의 효과를 이론적으로 분석하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.29.1-29.1
• /
• 2009

Fabrication of good quality P-type GaN remained as a challenge for many years which hindered the III-V nitrides from yielding visible light emitting devices. Firstly Amano et al succeeded in obtaining P-type GaN films using Mg doping and post Low Energy Electron Beam Irradiation (LEEBI) treatment. However only few region of the P-GaN was activated by LEEBI treatment. Later Nakamura et al succeeded in producing good quality P-GaN by thermal annealing method in which the as deposited P-GaN samples were annealed in N2 ambient at temperatures above $600^{\circ}C$. The carrier concentration of N type and P-type GaN differs by one order which have a major effect in AlGaN based deep UV-LED fabrication. So increasing the P-type GaN concentration becomes necessary. In this study we have proposed a novel method of activating P-type GaN by electrochemical potentiostatic method. Hydrogen bond in the Mg-H complexes of the P-type GaN is removed by electrochemical reaction using KOH solution as an electrolyte solution. Full structure LED sample grown by MOCVD serves as anode and platinum electrode serves as cathode. Experiments are performed by varying KOH concentration, process time and applied voltage. Secondary Ion Mass Spectroscopy (SIMS) analysis is performed to determine the hydrogen concentration in the P-GaN sample activated by annealing and electrochemical method. Results suggest that the hydrogen concentration is lesser in P-GaN sample activated by electrochemical method than conventional annealing method. The output power of the LED is also enhanced for full structure samples with electrochemical activated P-GaN. Thus we propose an efficient method for P-GaN activation by electrochemical reaction. 30% improvement in light output is obtained by electrochemical activation method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.16-23
• /
• 2019

Fine particulate matter known as PM 2.5 refers to the atmospheric particulate matter that has a diameter less than 2.5 micrometer identified as dangerous element for human health and its concentration can provide us a clear picture about air dust concentration. Humans stay indoor almost 90% of their life time and also there is no official indoor dust concentration data, so our study is focused on measuring the indoor air quality. Indoor dust data monitoring is very important in hospital environments beside that other places can also be considered for monitoring like classrooms, cements factories, computer server rooms, petrochemical storage etc. In this paper, visible light communication system is proposed by Manchester encoding technique for electromagnetic interference (EMI)-free indoor dust monitoring. Important indoor environment information like dust concentration is transferred by visible light channel in wide range. An average voltage-tracking technique is utilized for robust light detection to eliminate ambient light and low-frequency noise. The incoming light is recognized by a photo diode and are simultaneously processed by a receiver micro-controller. We can monitor indoor air quality in real-time and can take necessary action according to the result.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.306-311
• /
• 2001

Natural colorants haute attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental Issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption Peaks in the range of 240 ∼400 In. From the result of IR spectra, the major ingredient of extract of Gikgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.713-718
• /
• 2013

In this paper, additional data transmission scheme was proposed based on SSB-OFDM Communication system which was know as efficient technique for bandwidth, because it used only single side band instead of double side band. When sending additional data which should be well spreaded for low power characteristics and error robustness. Gold code was selected for spreading code because it has excellent low-cross correlation characteristics. Through computer simulation, the validity was proved that proposed system is well worked with SSB-OFDM system.

• Korean Security Journal
• /
• no.3
• /
• pp.117-144
• /
• 2000

Not only has there been movement along the sectoral continuum, Johnston argues, but changes in the spatial balance of policing are also visible. More concretely, he suggests that British policing has been undergoing a century-long process that has gathered pace since the 1960s. Three factors have been central to this process. First, legislative centralization brought about by the Police Act 1964 - which established the tripartite structure for police governance and amalgamated forces - and the Local Government Act 1972 which reorganized local government. Secondly, the political and industrial unrest of the 1970s and early 1980s led to the establishment of new levels of national police co-operation and, in the words of one author, to the establishment of a 'de facto national police force'. Thirdly, increasing European influence has further internationalized police co-operation and organization. Johnston concludes that the spatial restructuring that appears to be taking place in British policing is indicative of a broader process of fragmentation of social structures and systems for maintaining order.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.289-294
• /
• 2017

A high-performance time-division multiplexing (TDM) -based multiuser (MU) multiple-input multipleoutput (MIMO) system for efficient indoor visible-light communication (VLC) is presented. In this work, a MIMO technique based on RGB light-emitting diodes (LEDs) with selection combining (SC) is utilized for data transmission. That is, the proposed scheme employs RGB LEDs for parallel transmission of user data and transmits MU data in predefined slots of a time frame with a simple and efficient design, to schedule the transmission times for multiple users. Simulation results demonstrate that the proposed scheme offers an approximately 6 dB gain in signal-to-noise ratio (SNR) at a bit error rate (BER) of $3{\times}10^{-5}$, as compared to conventional MU single-input single-output (SISO) systems. Moreover, a data rate of 66.7 Mbps/user at a BER of $10^{-3}$ is achieved for 10 users in indoor VLC environments.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2002

The world at the end of the $20^{th}$ Century has become "blue" Indeed, this past decade has witnessed a "blue rush" towards the development of violet-blue-green light emitting diodes (LEDs) and laser diodes (LDs) based on wide bandgap III-Nitride semiconductors. And the hard work has culminated with, first, the demonstration of commercial high brightness blue and green LEDs and of commercial violet LDs, at the very end of this decade. Thanks to their extraordinary properties, these semiconductor materials have generated a plethora of activity in semiconductor science and technology. Novel approaches are explored daily to improve the current optoelectronics state-of-the-art. Such improvements will extend the usage and the efficiency of new light sources (e.g. white LEDs), support the rising information technology age (e.g. high density optical data storage), and enhance the environmental awareness capabilities of humans (ultraviolet and visible photon detectors and sensors). Such opportunities and many others will be reviewed in this presentation.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.122-125
• /
• 2003

Consuming against a recently internet and the Mobile machinery and tools is expanded and it uses controls the machinery and tools of existing technique an internet and in necessity It made a wool one page from the dissertation which it tries to follow hereupon and web it led and controls the machinery and tools system design. It uses a Mobile one web server and the technique which controls the machinery and tools that application field the home network, telemetries the back is visible With the fact that the next continuous research will be necessary because wide.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.483-485
• /
• 2014

Transparent amorphous In-Si-O (ISO)/Ag/In-Si-O (ISO) has been reported for low emissivity (low-e) applications. Effective Si doping into the $In_2O_3$ matrix led to a completely amorphous ISO film as well as a low resistivity and a high optical transmittance. The optical and electrical performances were examined by measuring transmittance with a UV-VIS spectrophotometer and resistivity with a Hall effect measurement. Consequently, low-e glass with ISO/Ag/ISO showed a high transparency in the visible region and low emissivity in the infrared region, indicating that ISO is a promising amorphous transparent electrode for low-e glass.