• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.186-193
• /
• 2019

Visible light communication technology is being studied and developed in various ways due to advantages such as high transmission speed, excellent positioning and higher security. However, existing visible light communication systems have difficulties in entering the market because they use special transmitters and receivers. We will overcome the difficulty if we develope a VLC system that uses a conventional LED light as a transmitter and a smartphone camera as a receiver. What matters is that LED lights include a scatter filter to prevent glareness for human eyes, but the existing VLC(Visual Light Communication) method can not be applied. In this paper, we propose a method to encode data with On / Off patterns of LEDs in the lighting with $M{\times}N$ LEDs. We defined parameters like L-off-able and K-seperated to facilitate the recognition of On / Off patterns in the diffused Lights. We conducted experiments using an LED lighting and smart phones to determine the parameter values. Also, the maximum transmission rate of our encoding technique is mathematically presented. Our encoding scheme can be applied to indoor and outdoor positioning applications or settlement of commercial transactions.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.425-430
• /
• 2007

Depends on the running dry of the radio resources for the next generation of wireless communication system the estimated possibilities of the visible light which used for the devices such as signal light, the electric display board, guide board and so on applied for the next generation wireless network is the topic to be explored in this paper. Since radiation efficiency utilization for the wireless network has its capacity to become a trend direction we will study also on its application as well as the technique standardization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1375-1381
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap energy of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.32-36
• /
• 2016

In this paper, a transceiver of VLC (Visible Light Communication) using LED white lighting has been implemented. We analyzed differences between conventional wireless communication and VLC with high-speed data transmission in a variety of environments, and confirmed symbols which passed through a channel using QAM. In order to get a high data rate, we found some variables that should be considered essentially though experiments. In addition, we set a bandwidth and found an optimal gain according to the distance between transmitter and receiver. We analyzed proposed system model through Labview and finally showed a system performance and to efficient data transmission and detection for VLC, we apply the orthogonal sequences to VLC system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.905-910
• /
• 2010

In this paper, visible light communication(VLC) system modulated by a switching driver circuit of lighting light emitting diode(LED), not only for illumination but also for optical wireless communication, is implemented. Presented system could overcome the drawbacks of prior linear modulation technique such as low efficiency, heat generation, and limits to realization of high power lighting LED. Experimental results from the realized digital audio system are presented to confirm the superiority of the proposed circuit. Our prototype achieves a transmission data rate of 10 Mbps with a radius of 1.5 meters using 20 W output power, and the signals were detected successfully.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.41-46
• /
• 2012

Visible light communication(VLC) system based on LED devices has some specific advantages compared with RF system. First, visible light is harmless to human and there is no limit to using frequency band. Also, VLC system has good security performance, and it can use the very wide frequency band for data transmission. However, for simultaneously using the illumination and data transmission in VLC systems, degradation of code rate is occurred. So, in this paper, we proposed the novel line coding scheme for flicker free and efficient dimming control in VLC systems. From the simulation results, it is confirmed that proposed scheme has good flicker, dimming, and transmission performance compared to conventional variable pulse position modulation(VPPM) scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.140-146
• /
• 2018

Recently, VLC(Visible Light Communication) fusing with LED(Light Emitting Diode) used in indoor lighting and wireless communication technology has attracted attention. However, the VLC can communicate only within the coverage to measure the optical signal and the communication disconnection phenomenon is occur in the NLoS(Non-Line-of-Sight) area. In this paper, we propose VLC relay module to extend the coverage of VLC and improve the communication disconnection phenomenon in NLoS area. The proposed VLC relay module transmits the packet received from the transmitter to the VLC relay module and receiver. The experiment was carried out by installing one VLC transmitter and three VLC relay modules, communication coverage expansion and the improvement of communication disconnection phenomenon in the NLoS were confirmed by the increase of the VLC relay module. Also, we confirmed that the optical signal measurement performance is improved 2.4 times by using the dual sampling method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1363-1370
• /
• 2018

In visible light (VL) positioning based on angle of arrival (AOA) estimation for smart indoor service, the AOA parameters obtained at the receiver has sometimes a random and distributed angle form instead of a point angle form due to the multipath transfer of the actual visible light and short positioning distance. The AOA estimation of a VL signal with a random and parametric distributed angle form may give incorrect AOA parameter estimates, which may result in poor VL positioning performance. In this paper, we classify the AOA parameters of the received VL signal into three forms according to the actual positioning channel environment and consider the short-range VL positioning method. We propose a subspace-based AOA parameter estimation technique and a data fusion method, and analyzed the proposed method by simulation and the measurement of the real VL channel characteristics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.76-79
• /
• 2015

Visible light communication (VLC) is a short range optical communication technology using light emitting diodes. In this paper, we implement variable pulse position modulation (VPPM) defined in the IEEE 802.15.7 standard with a Cortex-M processor, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The synchronization procedure between the transmitter and receiver is not defined clearly in the VPPM standard. In order to synchronize the transmitter and receiver easily, two overhead bits are used including one start bit and one stop bit modulated by on-off keying (OOK). Experimental results under various environmental conditions show that the proposed VPPM can support a seamless 100 Kbps data rate with 10 levels in the dimming control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.595-601
• /
• 2015

These days, research related to Intelligent Transportation System (ITS) technology is being widely considered. ITS is inevitable for future transportation systems to reduce accidents, congestion, and offer a smooth flow of traffic. The use of Visible Light Communication (VLC) in ITS systems has been considered widely because of its EMC/EMI free and LED infrastructure reusable properties. Among the VLC schemes, this study analyzed the performance of the Color Shift Keying (CSK) scheme under a Vehicle-to-Infrastructure (V2I) downlink scenario to verify the capability of CSK as a communication tool for ITS. By modeling daylight noise using the modified Blackbody radiation model, this study examined the performance of V2I VLC under daytime conditions. The relationship between BER, the communication distance, and the amount of ambient-light noises under the pre-described V2I scenario were determined by simulations.