• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.453-454
• /
• 2003

Most research materials (data), which are used for the study of digital mapping and digital elevation model (DEM) in the field of Remote Sensing and Aerial Photogrammetry are aerial photographs and satellite images. Additionally, they are also used for National land mapping, National land management, environment management, military purposes, resource exploration and Earth surface analysis etc. Although aerial photographs have high resolution, the data, which they contain, are not used for environment exploration that requires continuous observation because of problems caused by its coastline, as well as single - spectral and long-term periodic image. In addition to this, they are difficult to interpret precisely because Satellite Images are influenced by atmospheric phenomena at the time of photographing, and have by far much lower resolution than existing aerial photographs, while they have a great practical usability because they are mulitispectral images. The PKNU 2 is an aerial photographing system that is made to compensate with the weak points of existing aerial photograph and satellite images. It is able to take pictures of very high resolution using a color digital camera with 6 million pixels and a color infrared camera, and can take perpendicular photographs because PKNU 2 system has equipment that makes the cameras stay level. Moreover, it is very cheap to take pictures by using super light aircraft as a platform. It has much higher resolution than exiting aerial photographs and satellite images because it flies at a low altitude about 800m. The PKNU 2 can obtain multispectral images of visible to near infrared band so that it is good to manage environment and to make a classified diagram of vegetation.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.291-305
• /
• 2003

The cost of deploying Geological and Environmental information gathering systems, especially when such systems obtain remote sensing and photographic data through the use of commercial satellites and aircraft. Besides the high cost equipment required, adverse weather conditions can further restrict a researcher's ability to collect data anywhere and anytime. To mitigate this problem, we have developed a compact, multi-spectral automatic Aerial photographic system. This system's Multi-spectral camera is capable of the visible (RGB) and infrared (NIR) bands (3032*2008 pixel). It consists of a thermal infrared camera and automatic balance control, and can be managed by a palm-top computer. Other features includes a camera gimbal system, GPS receiver, weather sensor among others. We have evaluated the efficiency of this system in several field tests at the following locations: Kyongsang-bukdo beach, Nakdong river (at each site of mulkeum-namji and koryung-gumi), and Kyungahn River. Its tested ability in aerial photography, weather data, as well as GPS data acquisition demonstrates its flexibility as a tool for environmental data monitoring.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.123-131
• /
• 2019

In this study, the development of transparent UV blocking material using $TiO_{2-x}$ oxide thin film process was developed. A process technology is related to a process technology for making a sample with ultraviolet-shielding property of visible light transmittance of 78 % or more (total light transmittance at 550 nm) and of a UV cut-off characteristic of more than 95 % at 315 nm in ultraviolet wavelength band. In this study, it is possible to establish a flexible device process condition of high performance ultraviolet (UV) shielding thin film, to design mixed type of transparent flexible device with heterogeneous characteristics and to formulate composite deposition technology, according to various market demands. Establishment of actual roll-to-roll continuous process and equipment and process technology will affect related industries greatly.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.10-15
• /
• 2021

In this paper, we formed perovskite (CH3NH3PbI3) thin films on glass with wet coating methods, and used various analytical techniques to discuss film thickness, surface roughness, crystallinity, composition, and optical property. The coated semiconductor material has no defects and is uniform, the surface roughness value is very small, and a high absorption rate has been observed in the visible light area. Next, in order to implement the hole shape in the organic-inorganic layer, Samples in the order of a metal mask with holes at regular intervals, a glass coated with a perovskite material, and a magnet were etched with atmospheric pressure plasma equipment. The shape of the hole formed in the perovskite material was analyzed by changing the time. It can be seen that more etching is performed as the time increases. The sample with the longest processing time was examined in more detail, and it was classified into 7 regions by the difference according to the location of the plasma.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.287-292
• /
• 2023

In the case of fixed CCTV, there is a problem in that a shadow area occurs, even if the visible range is maximized by utilizing the pan-tilt and zoom functions. The representative solution for that problem is that a plurality of fixed CCTVs are used. This requires a large amount of additional equipment (e.g., wires, facilities, monitors, etc.) proportional to the number of the CCTVs. Another solution is to use drones that are equipped with cameras and fly. However, Drone's operation time is much short. In order to extend the time, we can use multiple drones and can fly one by one. In this case, drones that need to recharge their batteries re-enter into a ready state at the drone port for next operation. In this paper, we propose a system for precised positioning and stable landing on the drone port by utilizing a small drone equipped with a fixed forward-facing monocular camera. For our conclusion, we implement our proposed system, operate, and finally verify our feasibility.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.69-80
• /
• 2002

The objective of research provides the physical therapy of good quality to the patients to search for the problem pant against a physical therapy accident and it simultaneously respects physical therapy company law, the possibility of preparing a system defensive ability in order to be. The data were collected from 2000 October 1 to December 30th, and analyzed by a frequency and a percentage, oneway ANOVA, Scheffe method, $x^2$ official approvals. Conclusion (1) the accident where the patient falls from inside the treatment 'room is many and occasionally' 29.3% (63 people) with was many most. (2) Because of a mistake by a part-time therapist in holiday or a colleague therapist to do, the fracture or bum accident happens 12.5% (27 people), by a assist nurse due to more showed 12.1% (26 people) experience degree in the patient. (3) From physical therapy process breakdown of the medical treatment machinery and tools or it is in malfunction to do and the experience which has a failure to physical therapy is one enemy 68.1% (147 people) was in item. Also it treats and the patient or in the protector it sends an explanation in advance not to be, the experience which it enforces 50% (108 people), of service hour treatment equipment the medical treatment directives broad way of the doctor is accurate in insufficiency and does not enforce the experience is 45.4% (98 people), the patient whom I am treating Hot Pack (electricity has pack inclusion) with to do, the art dealer (over at 1 buffoonery) the experience which it puts on 27.1% (58 people), The patient whom I am treating is the electrotherapy flag (electricity has pack exclusion) with to do, the art dealer (1 degree art dealer over) the experience which it puts on 16.3% (35 people), the experience boat song the patient against a fracture from physical therapy process 9 person (4.2%) was visible an experience degree. (4) With hospital infection to do, from the patient the experience and the therapist which receive a problem proposal were caused by with hospital infection and the answer back regarding the experience which tries to receive a treatment appeared 6% (13 people), 42% (9 people) with each. (5) It listened to the treatment hour patient or the appeal of the protector and especially it does not appear to be being important it was not and and the management which is special it did not take, also the experience where the condition of the patient is deteriorated after that was 10.3% (22 people). (6) The condition or state of the patient does not agree with the medical treatment instruction of the doctor not to be, amendment one experience was 67.5% (145 people). (7) The experience degree of the physical therapy accident which relates with physical therapy recording and a secret maintenance 59.7% (129 people) 'is many and occasionally it is,' it showed an answer back and e it showed a most high accident experience degree. (8) The business overweight of physical therapy company 43.3% (93 people) with was high most from recognition degree of the physical therapy company against a physical therapy accident. (9) Against the question which asks the responsibility subject matter of physical therapy accident the whole answer back volition 42.8% did it is a joint responsibility where the multi person relates. (10) The accident occurs most the hour unit which plentifully in the afternoon 64.3% (133 people) with appeared from the recognition degree against the frequency hour unit of physical therapy accident. (11) Physical therapy it bought and after the various medical treatment accident which relates against the attitude of the, patient side against the physical therapy company it understood and trillion it was many most with 33.3% to be finished. (12) After physical therapy accident the management against the physical therapy company of the hospital authorities concerned above all do not experience 70.6% (149 people), from event right and wrong submission 22.7% (48 people), warning management 2.8% (6 people), the event report requirement and money compensation were each 0.5% (1 person). (13) As the prevention book of physical therapy accident most it is important, the fact which it thinks that, the persons supplement of physical therapy company 58.8% (127 people) with was high most. (14) It related with a physical therapy accident and the medical law 43.5%, civil law 23.9%, was visible the answer back ratio of the criminal law 13.7% from the degree which probably is a relation law.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2024

Along with economic growth and industrial development, there is an increasing demand for various electronic components and device production of semiconductor, SMT component, and electrical battery products. However, these products may contain foreign substances coming from manufacturing process such as iron, aluminum, plastic and so on, which could lead to serious problems or malfunctioning of the product, and fire on the electric vehicle. To solve these problems, it is necessary to determine whether there are foreign materials inside the product, and may tests have been done by means of non-destructive testing methodology such as ultrasound ot X-ray. Nevertheless, there are technical challenges and limitation in acquiring X-ray images and determining the presence of foreign materials. In particular Small-sized or low-density foreign materials may not be visible even when X-ray equipment is used, and noise can also make it difficult to detect foreign objects. Moreover, in order to meet the manufacturing speed requirement, the x-ray acquisition time should be reduced, which can result in the very low signal- to-noise ratio(SNR) lowering the foreign material detection accuracy. Therefore, in this paper, we propose a five-step approach to overcome the limitations of low resolution, which make it challenging to detect foreign substances. Firstly, global contrast of X-ray images are increased through histogram stretching methodology. Second, to strengthen the high frequency signal and local contrast, we applied local contrast enhancement technique. Third, to improve the edge clearness, Unsharp masking is applied to enhance edges, making objects more visible. Forth, the super-resolution method of the Residual Dense Block (RDB) is used for noise reduction and image enhancement. Last, the Yolov5 algorithm is employed to train and detect foreign objects after learning. Using the proposed method in this study, experimental results show an improvement of more than 10% in performance metrics such as precision compared to low-density images.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.180-188
• /
• 2013

The glass of E-glass fiber composition was fabricated by using refused coal ore which is obtained as by-product from Dogye coal mine in Samcheok. We used silica-alumina refused coal ore which has low carbon content relatively, and the amount of refused coal ore has been changed from 0 to 35 % in batch composition. E-glass was fabricated by the melting of mixed batch materials at $1550^{\circ}C$ for 2 hrs with different refused coal ore composition of 0~35 %. We obtained a transparent and clear glass with high visible light transmittance value of 81~84%, thermal expansion coefficient of $5.39{\sim}5.61{\times}10^{-6}/^{\circ}C$ and softening point of $851{\sim}860^{\circ}C$. The glass fiber samples were also obtained through fiberizing equipment at $1150^{\circ}C$, and tested chemical resistance and tensile strength to evaluate the mechanical property as a reinforced glass fiber of composite material. As the result, we identified the properties of E-glass fiber by using refused coal ore are plenty good enough compare to that of normal E-glass without refused coal ore, and confirmed the possibility of refused coal ore as for the raw material of E-glass fiber.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2018

General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.417-422
• /
• 2017

One of the most frightening aspects of weapons of mass destruction (WMD) is their ability to cause death in very small quantities without being visible to the public. The military authorities are making considerable effort to ensure the survivability of the combatants in the event of NBC(Nuclear, Biological and Chemical) contamination. Therefore, in this study, modules were developed for the measurement of the positive pressure and for the detection of the chemicals used for the control of the various shut-off valves used in an NBC shelter. In addition, a high performance gas tight shut-off valve was developed that can overcome the disadvantages associated with manual manufacturing, such as the occurrence of defective products and high manufacturing cost. By applying the positive pressure measurement and chemical detection modules, this valve was able to be used to control the facility. The developed gas-tight shut-off valve maintained airtight characteristics at a pressure loss of 28[Pa] at the prescribed wind velocity and an internal pressure of 30[kPa]. It is expected to be possible to control the gas-tight shut-off valve through the remote measurement of the positive pressure, thereby ensuring the foreign independence of import substitution and defense related technology in the future. In addition, by installing these valves in all of the intake ports or exhaust ports connected to the outside of the NBC shelter, it is possible to prevent the damage resulting from the rapid inflow of the storm pressure caused by conventional weapons and nuclear explosions, thereby protecting the people and equipment in the shelter.