• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1671-1680
• /
• 2014

There are always much concern about the leakage of radiation materials in the event of dismantle or unexpected accident of nuclear power plant. In order to remove the leakage of radiation materials, appropriate dispersion detection techniques for radiation materials are necessary. However, because direct handling of radiation materials is highly restricted and risky, developing radiation-related techniques needs computer simulation in advance to evaluate the feasibility. In this paper, we propose a radiation imaging technique which can acquire 3D dispersion information of radiation materials and tested by simulation. Using two virtual 1D radiation sensors, we obtain stereo radiation images and acquire the 3D depth to virtual radiation materials using stereo disparity. For point and plane type virtual radiation materials, the possibility of the acquisition of stereo radiation image and 3D information are simulated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2014

Petroglyphs is an essential part of the worldwide cultural heritage since it plays a key role for the comprehension of prehistoric communities previous to writing. nowadays 3D data are a critical component to permanently record the form of important cultural heritage so that they might be passed down to future generations. Recent 3D scanning technologies allow the generation of very realistic 3D model that can be used for multimedia museum exhibitions to attract the users into the 3D world. In this paper, we develop the 3D petroglyph VR contents based on a novel gesture recognition method. The proposed gesture recognition method can recognizes the movements of the user using 3D depth sensor by comparing with the pre-defined movements. Also this paper presents new approaches for 3D petroglyphs data recording using 3D scanning technology as accurate and non-destructive tools.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.294-304
• /
• 2022

PURPOSE. The purpose of this study was to evaluate the influence of different palatal vault configurations on the accuracy and scan speed of intraoral scans (IO) of completely edentulous arches. MATERIALS AND METHODS. Three different virtual models of a completely edentulous maxillary arch with different palatal vault heights- Cl I moderate (U-shaped), Cl II deep (steep) and Cl III shallow (flat)-were digitally designed using CAD software (Meshmixer; Autodesk, USA) and 3D-printed using SLA-based 3D-printer (XFAB; DWS, Italy) (n = 30; 10 specimens per group). Each model was scanned using intraoral scanner (Trios 3; 3Shape^TM, Denmark). Scanning time was recorded for all samples. Scanning accuracy (trueness and precision) were evaluated using digital subtraction technique using Geomagic Control X v2020 (Geomagic; 3DSystems, USA). One-way analysis of variance (ANOVA) test was used to detect differences in scanning time, trueness and precision among the test groups. Statistical significance was set at α = .05. RESULTS. The scan process could not be completed for Class II group and manufacturer's recommended technique had to be modified. ANOVA revealed no statistically significant difference in trueness and precision values among the test groups (P=.959 and P=.658, respectively). Deep palatal vault (Cl II) showed significantly longer scan time compared to Cl I and III. CONCLUSION. The selection of scan protocol in complex cases such as deep palatal vault is of utmost importance. The modified, adopted longer path scan protocol of deep vault cases resulted in increased scan time when compared to the other two groups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.250-259
• /
• 2023

The use of digital technology in fixed prosthetic treatment using implants enables predictive treatment through diagnosis and virtual surgery by integrating clinical and radiological information of patients. Existing digital scanning methods require several components to be removed, such as removing the healing abutment and connecting the scan body. In the scannable healing abutment developed in consideration of this point, scanning is performed directly on the healing abutment, maintaining soft tissue sealing and simplifying scanning. Digital technology can also be used when obtaining the intermaxillary relationship. Recently, various digital technologies have been reported to acquire the intermaxillary relationship of edentulous patients using surgical guides, patient-specific scanning devices, or scans of the inside of temporary dentures. In this case, the implant-supported fixed prosthesis treatment was performed through scanning the scannable healing abutment and the inner side of the temporary denture to obtain the intermaxillary relationship, thereby simplifying the treatment process and obtaining aesthetically and functionally excellent clinical results.

• The Journal of the Korean dental association
• /
• v.58 no.11
• /
• pp.700-712
• /
• 2020

The conventional mouthguard fabrication process consists of elastomeric impression taking and followed gypsum model making is now into intraoral scanning and direct mouthguard 3D printing with an additive manufacturing process. Also, dental professionals can get various diagnostic data collection such as facial scans, cone-beam CT, jaw motion tracking, and intraoral scan data to superimpose them for making virtual patient datasets. To print mouthguards, dental CAD software allows dental professionals to design mouthguards with ease. This article shows how to make 3D printed mouthguard step by step.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.377-384
• /
• 2017

The scope of the matrix application is so broad that it can not be limited. A typical matrix application area in computer science is image processing. Particularly, radar scanning equipment implemented on a small embedded system requires real-time matrix transposition for image processing, and since its memory size is small, a general matrix transposition algorithm can not be applied. In this case, matrix transposition must be done in disk space, such as flash disk, using a limited memory buffer. In this paper, we analyze and improve a recently published flash disk-based matrix transposition algorithm named as asymmetric sub-matrix transposition algorithm. The performance analysis shows that the asymmetric sub-matrix transposition algorithm has lower performance than the conventional sub-matrix transposition algorithm, but the improved asymmetric sub-matrix transposition algorithm is superior to the sub-matrix transposition algorithm in 13 of the 16 experimental data.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.331-336
• /
• 2004

The phase change due to the reflection from target surfaces in a white-light interferometer induces measurement errors when target surfaces are composed of dissimilar materials. We prove that this phase change on reflection as the polarization of the white-light changes causes a shift of both envelope peak position and fringe peak position of several tens of nanometers as the polarization of the white-light changes. In addition, we propose a new equation for white-light interference fringes depending on the polarization of the source.

• Proceedings of the KSLP Conference
• /
• 2016.03a
• /
• pp.49-49
• /
• 2016

• The Journal of the Korean dental association
• /
• v.56 no.6
• /
• pp.339-347
• /
• 2018

Conventional mouthguard fabrication process which consists of elastomeric impression taking and followed gypsum model making is changing into intraoral scanning and dental model printing with 3D printer. In addition, new 3D printing materials for mouthgurad, 3D Computer-Aided Design(CAD) software for dental appliance, evaluation of a virtual dentoalveolar model for testing virtually 3D designed mouthguard, and lightweight sensor technology will lead dental professionals to the new era of Sports Dentistry, including information technology integrated custom mouthguard fabrication and creating value with analytic data acquired from sensors in mouthguard.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.185-186
• /
• 2017

Even large construction projects of nuclear power plant construction and production data is increasing dramatically due to the introduction of ICT technologies, such as 3D scanning technology, wireless communication technology, virtual construction management technology. There are various attributes and types of data to be produced and managed because the documents generated by the contract method are different from the cost processing method. According to the requirements of the international nuclear bid, it is required to present the cost that is calculated based on resource quantity. This research considers ways in which the cost management based on the resource quantity.