• Smart Media Journal
• /
• v.13 no.6
• /
• pp.80-89
• /
• 2024

This study aims not only to address environmental issues caused by indiscriminate fashion consumption, specifically in the context of Fast Fashion but also to find an alternative and a sustainable solution that is 'Upcycling' using the 3D clothing simulation program Z-weave. Upcycling products have limitations in that it is difficult to produce samples since finished products must be produced directly with limited materials and resources like waste clothes. To overcome these limitations, a 3D clothing simulation program is introduced to effectively utilize the limited resources of waste clothing. The purpose of this study is to confirm the similarity between a virtual fabric created through Z-weave and a real fabric, through this, to evaluate the possibility of application in the actual fashion industry. As a research method, surveys and interviews were conducted with related majors on virtual clothing created as similar as possible to actual clothing by adjusting the physical properties within the Z-weave program. This study attempted to describe the impact of digital technology on the fashion industry and how 3D clothing simulation programs can be used in sustainable fashion production.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.673-678
• /
• 2015

The purpose of this study was to evaluate the reliability and accuracy of linear measurements in digital models compared to master model. A master model (ANKA-4; Frasaco GmbH, Tettnang, Germany) with the prepared upper full arch tooth was used. Four linear measurements were recorded between landmarks, directly on the master model and the digital models by a single examiner. Measurements were made with a digital caliper from manual model and with the software from the virtual models. The t-test for paired samples and intraclass correlation coefficient (ICC) were used for statistical analysis. The measurement of two methods showed good reliability. The mean differences between master and digital model were 0.06~0.12 mm. These in vitro studies show that accuracy and reliability of the digital impression is similar to that of the gold standard. Therefore digital impression was also considered to be a acceptable for placement clinically.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.2
• /
• pp.11-20
• /
• 2015

We present a new interactive technique for directing the motion sequences of an animated character by dragging its specific body part to a desired location in the three-dimensional virtual environment via a hand motion tracking device. The motion sequences of our character is synthesized by reordering subsequences of captured motion data based on a well-known graph representation. For each new input location, our system samples the space of possible future states by unrolling the graph into a spatial search tree, and retrieves one of the states at which the dragged body part of the character gets closer to the input location. We minimize the difference between each pair of successively retrieved states, so that the user is able to anticipate which states will be found by varying the input location, and resultantly, to quickly reach the desired states. The usefulness of our method is demonstrated through experiments with breakdance, boxing, and basketball motion data.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.97-104
• /
• 2007

At a time of emphasized need for user-oriented design, methods such as Post Occupancy Evaluation are being used to measure the exact demands of the users. The conventional methods, however, have mostly been conducted based on questionnaires printed on paper, which has posed numerous problems in researches designed to measure the visual demands. Along with the continued development of the internet and computer media, there have been examples of interactive media applications as a means of improving the existing paper-based research methods. This study is a follow-up to the primary study that unveiled cautious variances of the media. 200 samples of media-based researches were extracted to be used in analysis of in-depth visual demands. 200 housewives from rural Iud development zones, who exercises the most influence in household purchases in these regions where the problem of rate of distribution Is coming under the limelight, were chosen as the subjects. The subjects were selected from land development zones of Gimhae-si and Haeundae. At first, the research was prepared as a web-based endeavor but it employed direct research of field personnel in consideration of that this research is in the beginning. This follow-up study deals mainly with the visual demands for which cautious variances were detected in the primary study and includes analysis of mainly ground Plan layout, space coloration, livingroom utilization, and vlsual composition of LDK. Media research had the advantage of zero rate of questionnaire error due to a pre-programmed search routine, and it was possible to ascertain the actual trade-off basis demands of the residents in terms of ground plan layout. In addition, whereas conventional research methods based on still images were susceptible to the preconceptions of the respondents, the interactive media allowed for easy understanding of the spatial layout and thus made it possible for all respondents to provide answers under the same conditions.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.127-134
• /
• 2009

In spite of controversial debates on aesthetic issues of computer-generated electronic music, rapid advancement of music technologies in the past decade have resulted proliferation of using virtual software synthesizers and samplers in music composition. Computer-based music production platform has become not only a norm among some of contemporary music composers but also vital apparatus for their compositional process. There are two imperative parts of this compositional process involving sampling in computer-based music production, which are commercially available sample libraries that include pre-recorded audio samples, and music production software that processes them. The purpose of this study is to investigate the process and effectiveness of reconstructive compositional process utilizing distinctive features of sampling on computer music production software. This study addresses issues such as: the definition of audio sampling, how sampling is incorporated in compositional process, and what features of music production software are particularly effective in various musical expressions. The result of this study will hopefully accommodate and fulfill the needs of electronic and acoustic musicians' creativeness.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.86-99
• /
• 2007

In this study, the concept of play as an entertainment is redefined and applicable method of fashion design as a play are suggested by analyzing the feature of doll's costume design based on the play pattern. In literary study, the role of playing doll Is described and has been examined by the analysis of scholars' opinions. In positive study, the pattern and costume design of sample costume dolls are analyzed using 624 samples of the representative images collected from the literatures and real figures, and they are classified as collection dolls or fashion dolls in order to analyze the feature of fashion design in playing dolls. As a result of the analysis of doll's costumes based on its use, the costumers are divided into a real world costume which is similar to what human wear in daily life and a virtual costume which is used in the movie or play and the costumes only worn by the dolls. The examination of the type of costume worn by dolls, dress is principally dominant costume in collection doll, whereas in fashion doll, dress is still mainly worn but shirt blouse & pants, shirt blouse k skirt, jacket, coat, bathing suit. etc. are shown dispersedly as well. In the costume silhouette of dolls, collection doll uses mostly A line silhouette meanwhile fit and flare is mostly used in the fashion doll but other silhouettes are also relatively shown a lot. In the means of the color of the costume worn by dolls, collection doll is more similar to those in actual fashion design. On the contrary, the color of the costume that fashion doll is put on is more free and more various because the trendy rotors such as green, yellow, purple, etc are used.

• Journal of Biomedical Engineering Research
• /
• v.37 no.3
• /
• pp.105-111
• /
• 2016

Introduction: Surgical robot is the alternative instrument that substitutes the difficult and precise surgical operation; should have intuitiveness operationally to transfer natural motions. There are limitations of hand motion derived from contacting mechanical handle in the surgical robot master interface such as mechanical singularity, isotropy, coupling problems. In this paper, we will confirm and verify the feasibility of intuitive Non-restraint master interface which tracking the hand motion using infra-red camera and only 3 reflective markers without the hardware handle for the surgical robot master interface. Materials & methods: We configured S/W and H/W system; arranged 6 infra-red cameras and attached 3 reflective markers on hands for measuring 3 dimensional coordinate then we find the 7 motions of grasp, yaw, pitch, roll, px, py, pz. And we connected Virtual-Master to the slave surgical robot(Laparobot) and observed the feasibility. To verify the result of motion, we compare the result of Non-restraint master and that of clinometer (and protractor) through measuring 0~180 degree, 10degree interval, 1000 samples and recorded standard deviation stands for error rate of the value. Results: We confirmed that the average angle values of Non-restraint master interface is accurately corresponds to the result of clinometer (and protractor) and have low error rates during motion. Investigation & Conclusion: In this paper, we confirmed the feasibility and accuracy of 3D Non-restraint master interface that can offer the intuitive motion of non-contact hardware handle. As a result, we can expect the high intuitiveness, dexterousness of surgical robot.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.17-25
• /
• 2020

Purpose: The purpose of this study was to evaluate and compare the accuracy of definitive casts that are fabricated from digital intraoral impression and conventional impression technique. Methods: A master model(ANNA-4, Frasaco GmbH, Tettnang, Germany) with the prepared upper full arch tooth was used. Conventional impression and then stone model(n=10) were produced from this master model, and on the other hands, digital impressions were made with the CS-3600 intraoral scanner(n=10). Six linear measurements were recorded between landmarks, directly on each of the stone models on two occasions by a single examiner. Measurements were made with a digital caliper to the nearest 0.01mm from manual models and with the software(Delcam PowerSHAPE) from the virtual models. The t-student test for paired samples and intraclass correlation coefficient(ICC) were used for statistical analysis. Results: The measurement of two methods showed good reliability. The ICC of the two models were 0.88~0.91(stone model) and 0.94~0.99(digital model). The mean differences to master model for stone model and digital model were 0.10~0.14mm, and 0.14~0.20mm, respectively. Conclusion: The definitive casts obtained with digital intraoral technique model had significantly larger dimensions as compared to those of the stone model. However, the differences to the master model detected appear to provide enough accuracy and reliability for clinical application.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.634-644
• /
• 2021

This study aims to propose various ways to utilize CLO, which focuses mainly on the production of 3D virtual samples, by comparing it with the pattern drafting functions of Four apparel CAD experts, who have teaching experience in YUKA and CLO, participated in a focus group interview, and a basic bodice prototype drafting was carried out by each participant to evaluate the pattern drafting functions of YUKA and CLO. The result of this study showed that the pattern drafting tools of YUKA are subdivided since YUKA is a CAD tool inherently specialized in pattern making. Though CLO provided a relatively limited pattern drafting menu compared to YUKA, it was found that pattern drafting could be accomplished with the help of supplementary tools and functions. This finding suggests that each CAD offers the corresponding tools for the same use of menus or functions in the prototype drafting process. The major difference between YUKA and CLO is that YUKA defines the pattern area by a set of line segments, whereas CLO utilizes an outline composed of closed curves. YUKA provides various specific tools according to the options such as angles, straight lines, and curves, while CLO produces the same results using combinations of a limited number of tools. Compared with YUKA, the advantage of CLO is its user-friendly task environment such as the Windows-based user interface, from the usability perspective. This study concludes that pattern drafting education using CLO would help not only industrial 3D design practitioners but also pattern education in academia

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.294-304
• /
• 2022

PURPOSE. The purpose of this study was to evaluate the influence of different palatal vault configurations on the accuracy and scan speed of intraoral scans (IO) of completely edentulous arches. MATERIALS AND METHODS. Three different virtual models of a completely edentulous maxillary arch with different palatal vault heights- Cl I moderate (U-shaped), Cl II deep (steep) and Cl III shallow (flat)-were digitally designed using CAD software (Meshmixer; Autodesk, USA) and 3D-printed using SLA-based 3D-printer (XFAB; DWS, Italy) (n = 30; 10 specimens per group). Each model was scanned using intraoral scanner (Trios 3; 3Shape^TM, Denmark). Scanning time was recorded for all samples. Scanning accuracy (trueness and precision) were evaluated using digital subtraction technique using Geomagic Control X v2020 (Geomagic; 3DSystems, USA). One-way analysis of variance (ANOVA) test was used to detect differences in scanning time, trueness and precision among the test groups. Statistical significance was set at α = .05. RESULTS. The scan process could not be completed for Class II group and manufacturer's recommended technique had to be modified. ANOVA revealed no statistically significant difference in trueness and precision values among the test groups (P=.959 and P=.658, respectively). Deep palatal vault (Cl II) showed significantly longer scan time compared to Cl I and III. CONCLUSION. The selection of scan protocol in complex cases such as deep palatal vault is of utmost importance. The modified, adopted longer path scan protocol of deep vault cases resulted in increased scan time when compared to the other two groups.