• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.81-89
• /
• 2012

This paper presents a set of controlled simulated statical and engineering mechanical experiments accessible via the virtual world environment (VWE) and virtual physics lab S/W. Online courses of the university offering courses and/or programs online are growing and the number of students want education in ways which fit their personal places, e-learning is becoming more important and ubiquitous each year. In this study, first of all, question is rather 'How do we execute the learning effectiveness of e-learning courses?' than 'Why does they need e-learnig or VW-learning?'. In particular, is it possible to effectively teach mechanical engineering courses online? The answer was 'No'. So, there is little research on many of these questions. And another important question is 'Is e-learning cost effective?'. For the answer, This research provided that an instructional design model is used to 'How to think and apply the Newtonian forces' in the virtual physics lab S/W. Collected data from student are administered in the spring semester when students studied 'Introduction to Bio-resources and Systems Engineering'. Results show that a cadre of students can take highly interactively physical properties of mechanical engineering in the virtual laboratory environment. Those show that VWE is greater than that of a similar real world presentation or experimental lab, since most of students are delighted to modify and retry modeling works in the VWE.

• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.36-44
• /
• 2019

Variable displacement swash plate piston pump analysis requires electric, hydraulics and dynamics which are similar to the one's incorporated in the complex fluid power and mechanical systems. The main variable capacity for the swash plate piston pumps, hydraulics or simple kinematic (swash plate degree, piston displacement) models are analyzed using AMESim, a multi-physics analysis program. AMESim is a multi-physics hydraulic analysis program that is considered good for the environment but not appropriate for environmental analysis for multibody dynamics. In this study, the analytical model of the swash plate type hydraulic piston pump variable capacity is modeled by combining the hydraulic part and the dynamic part through co-simulation of multibody dynamics program (Virtual.lab Motion) and multi-physics analysis (AMESim). This paper describes the whole modeling analysis method on the mechanical analysis of the multi-body dynamics program and how the hydraulic analysis in multi-physics analysis program works. This paper also presents a methodology for analyzing complex fluid power systems.

• 한국컴퓨터그래픽스학회논문지
• /
• 제23권5호
• /
• pp.57-66
• /
• 2017

본 연구는 물리 기반의 자동차 애니에이션 기술을 연구하였으며, 일반인도 손쉽게 차량 애니에이션을 제작할 수 있도록 직관적인 저작도구를 제안하였다. 사용자가 직접 차량의 이동 경로 및 속도를 지정하면, 이동 경로의 방향적 특성에 기반한 시뮬레이션 구간 분할과 피드백 기반 주행 경로 탐색 기법을 통해 기존 연구보다 빠르고 정확한 주행 시뮬레이션을 수행하도록 하였다. 결과적으로 차선 변경 및 추월을 포함한 단순 주행 애니메이션뿐만 아니라 기존 관련 연구에는 없었던 차량 충돌 애니메이션 또한 제작할 수 있다. 아울러 차체 모델을 실제 차량과 유사하게 설계하였기 때문에, 제동 시 차량이 미세하게 혼들리는 현상이나 추돌 시 차량이 찌그러지는 현상 등 실제에 가까운 차량의 웅직임을 묘사할 수 있다.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.284-290
• /
• 2020

In this paper, we propose a method to generate and optimize the height map that is suitable to render a soap bubble. The height map represents the flow speed of soap bubbles. To this end, we have analyzed the flow of the soap bubble surface through experiment, derived the moving speed value for each section. Some image filters have been used for optimization that reflects the parameters of the derived height map. In addition, in order to verify the results of the study, actual data measuring the surface flow speed of soap bubbles, the speed of the initial height map, and the optimized height map speed have been compared and tested. Through this study, we reach the issue that it is possible to express the variable flow speed of soap bubbles with the optimized height map, and it will help to express various fluids.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1327-1337
• /
• 2018

This paper investigates the vibration behavior of pristine and defected triangular graphene sheets; which has recently attracted the attention of researchers and compare these two types in natural frequencies and sensitivity. Here, the molecular dynamics method has been employed to establish a virtual laboratory for this purpose. After measuring the different parameters obtained by the molecular dynamics approach, these data have been analyzed by using the frequency domain decomposition (FDD) method, and the dominant frequencies and mode shapes of the system have been extracted. By analyzing the vibration behaviors of pristine triangular graphene sheets in four cases (right angle of 45-90-45 configuration, right angle of 60-90-30 configuration, equilateral triangle and isosceles triangle), it has been demonstrated that the natural frequencies of these sheets are higher than the natural frequency of a square sheet, with the same number of atoms, by a minimum of 7.6% and maximum of 26.6%. Therefore, for increasing the resonance range of sensors based on 2D materials, nonrectangular structures, and especially the triangular structure, can be considered as viable candidates. Although the pristine and defective equilateral triangular sheets have the highest values of resonance, the sensitivity of defective (45,90,45) triangular sheet is more than other configurations and then, defective (45,90,45) sheet is the worst choice for sensor applications.

• 대한기계학회논문집B
• /
• 제38권5호
• /
• pp.423-430
• /
• 2014

파이프 유동 내에서 일어나는 소음 및 진동현상의 경우 일반적으로 난류유동과 근처의 벽면사이의 유동유기진동에 의해 일어나게 된다. 복잡한 난류유동을 가지는 확장관의 단순한 경우에서 본 연구는 수행되었지만, 방사소음의 경우 주어진 모델에서 크기와 형상 그리고 두께 등에 상당히 영향을 받게 된다. 또한, 방사소음은 그 파가 퍼져나가면서 주위 시스템에 교란특성이나 불안정성을 야기시키게 되는데 결국 중요한 파단과 파손을 일으키게 된다. 본 연구는 다양한 상용프로그램들 (Fluent, NASTRAN, 그리고 VIRTUAL LAB)을 이용하여 이러한 현상을 파악하고자 하였다. 이 연구를 통해 유동소음에 있어 깔려있는 물리현상들을 이해하고자 하였다. 확장관의 경우 단면적의 급격한 변화에 의해 박리와 높은 압력강하를 겪게 되는데, 방사소음의 계산으로 이 방사소음의 크기가 100에서 500Hz영역에서 전체적으로 약 20dB정도 감소시킬 수 있는 것을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.28-38
• /
• 2012

The characteristics of vibration and noise of a compressor used for electric appliances have significant influence on the quality of the products. For improvement on the quality of electric appliances, investigations for understanding the dynamic behaviour of the compressor are essential. Since Virtual Lab for the dynamics model and MAXWELL for the electromagnetics model are separate software programs with no interface, the joint simulation of the models could not be performed. This study suggests a way to develop the compressor model capable of the joint simulation with MATLAB/SIMULINK linking a flexible multi-body dynamics model, a torque model, and an electricity control model. The compressor model is found to be able to perform I/O data transfer among the sub-models and joint simulation. The simulation results of the flexible body and rigid body dynamics models were compared to check availability of the joint simulation system. In addition, the simulated vibration and driving torque of the compressor mechanisms were compared with measurements. Through the simulations, the influence of springs and LDT on the dynamic behaviour of the compressor was examined. This study examines the influence of the dynamic behaviour of the compressor mechanisms through joint simulation of the flexible multi-body dynamics model and electromagnetic circuit allows analysis.