Browse > Article
http://dx.doi.org/10.7839/ksfc.2019.16.1.036

Modeling Technique for a Positive and Negative Variable Displacement Swash Plate Hydraulic Piston Pump in a Multibody Dynamics and Multi-Physics Co-Simulation Environment  

Jang, Jin Hyun (Department of Mechanical Engineering, Kunsan National University)
Jeong, Heon Sul (Department of Mechanical Engineering, Kunsan National University)
Publication Information
Journal of Drive and Control / v.16, no.1, 2019 , pp. 36-44 More about this Journal
Abstract
Variable displacement swash plate piston pump analysis requires electric, hydraulics and dynamics which are similar to the one's incorporated in the complex fluid power and mechanical systems. The main variable capacity for the swash plate piston pumps, hydraulics or simple kinematic (swash plate degree, piston displacement) models are analyzed using AMESim, a multi-physics analysis program. AMESim is a multi-physics hydraulic analysis program that is considered good for the environment but not appropriate for environmental analysis for multibody dynamics. In this study, the analytical model of the swash plate type hydraulic piston pump variable capacity is modeled by combining the hydraulic part and the dynamic part through co-simulation of multibody dynamics program (Virtual.lab Motion) and multi-physics analysis (AMESim). This paper describes the whole modeling analysis method on the mechanical analysis of the multi-body dynamics program and how the hydraulic analysis in multi-physics analysis program works. This paper also presents a methodology for analyzing complex fluid power systems.
Keywords
Hydraulic swash plate piston pump; Multi-physics analysis; Multibody dynamics analysis; AMESim; Virtual.lab Motion;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 H. S. Jeong et al., "Torque Analysis on Swash plate in Swash plate Type Hydraulic Axial Piston Motor Using Constant Velocity Joint and Piston-Rod Mechanism Using Multi body dynamics program", Proceedings of 2017 Autumn Conference on Drive and Control, pp.191-194, 2017.
2 A. G. Alleyne and R. Liu, "Systematic control of a class of nonlinear systems with application to electrohydraulic cylinder pressure control", IEEE Transactions on Control Systems Technology, Vol.8, No.4, pp.623-634, 2000.   DOI
3 D. J. Kim et al., "Developments of HSU and Transmission Control Technology for Continuously Variable Transmission of Tractor and Forklift", Journal of Drive and Control Vol.15, No.1, pp.51-60, 2018.
4 H. S. Jeong and J. H. Jang, "Linear-nonlinear Modeing Comparative Study of the Pressure Control using EPPR Valve for Variable Displacement Piston Pumps of a Construction Machinery", Proceedings of 2016 Autumn Conference on Drive and Control, pp.131-136, 2016.
5 A. Roccatello, S. Manco and N. Nervegna, "Modelling a Variable Displacement Axial Piston pump in a Multibody Simulation Environment", Journal of Dynamic Systems, Measurement, and Control, Vol.129, pp.456-468, 2007.   DOI
6 H. S. Jeong et al., "A Study on the Design and Performance Evaluation of Servo Regulator for a Piston Pump Through Simulation", Proceedings of the KSME 2015 Fall Annual Meeting, pp.3374-3375, 2015.
7 H. S. Jeong, J. H. Jang and Y. M. Lim, "Positive and Negative Variable Swash plate Hydraulic Piston Pump Torque Analysis Using Multibody Dynamics Program", Proceedings of the KSME 2018 Spring Annual Meeting, pp.114-115, 2018.
8 H. S. Jeong et al., "A Comparative Study on the Equation of Motion about Models of Variable Displacement Piston Pump through MATLAB & DAFUL", Proceedings of the KSME 2016 Spring Annual Meeting, pp.75-76, 2016.
9 C. N. Kang et al., "Dynamic Characteristics of Electro-hydraulic Proportional Valve for an Independent Metering Valve of Excavator", Journal of Drive and Control, Vol.15, No.2, pp.46-51, 2018.   DOI
10 C. N. Lee, K. C. Hong and H. S. Jeong, "Analysis of the Influence of the Design Factors and Modeling for the 8inch Class Down-the-Hole Hammer", Journal of Drive and Control, Vol.14, No.4, pp.1-8, 2017.   DOI
11 G. Zeiger and A. Akers, "Torque on the Swashpalte of an Axial Piston Pump", Journal of Dynamic Systems, Measurement, and Control, Vol.107, pp.220-226, 1985.   DOI
12 H. S. Jeong and J. H. Cho, "AMESim Modeling Comparative Study of the Flow Control using EPPR Valve for Variable Displacement Piston Pumps of a Construction Machinery", Proceedings of the KSME 2014 Fall Annual Meeting, pp.1177-1182, 2014.
13 D. S. Jung, H. E. Kim and E. S. Kang, "Multi function Control of Hydraulic Variable Displacement Pump with EPPR Valve" Transactions of KSAE, Vol.14, No.6, pp.160-170, 2006.
14 Y. H. Yoon, J. S. Jang and Y. B. Lee, "An Analysis of Dynamic Characteristics for Varialbe Swash Plate Type Axial Piston Pump", Proceedings of the KSFC 2012 Spring Conference, pp.23-30, 2012.