• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.21-30
• /
• 1990

This paper describes a hardware implementation of the interframe monochrome video CODEC using a MC-CVQ(Motion Compensated and Classified Vector Quantization) algorithm. The specifications of this CODEC are (1) the resolution of image is $128{\times}128$ pixels, and (2) the transmission rates are about 10frames/sec at the 64Kbps channel. In order to design the CODEC under these conditions, it is implemented by a multiprocessor system composed of MC unit, CVQ nuit and decoder unit, which are controlled by microprogramming technique. And the 3~stage pipelined ALU(Arithmetic and Logic Unit) is adopted to calculate the minimum error distance in the MC unit and CVQ nuit. The realized system shows that the transmission rates are 6-15 frames/sec according to the relative motion of the video signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.439-446
• /
• 2011

In this paper, we proposed and implemented a dedicated hardware for Huffman coding which is a method of entropy coding to use compressing multimedia data with video coding. The proposed Huffman codec consists Huffman encoder and decoder. The Huffman encoder converts symbols to Huffman codes using look-up table. The Huffman code which has a variable length is packetized to a data format with 32 bits in data packeting block and then sequentially output in unit of a frame. The Huffman decoder converts serial bitstream to original symbols without buffering using FSM(finite state machine) which has a tree structure. The proposed hardware has a flexible operational property to program encoding and decoding hardware, so it can operate various Huffman coding. The implemented hardware was implemented in Cyclone III FPGA of Altera Inc., and it uses 3725 LUTs in the operational frequency of 365MHz

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.203-206
• /
• 2001

This Paper suggests real-time video streaming method by using DCT-based scalability, and evaluates and analyzes the function. It is similar to using lowpass filter. That is, as following figure, this method is to split the encoded data in splitter and transmit it, and to decode the data according to the situation. This method can be applied to any video CODEC which is based on DCT. Therefore, this thesis suggests easy video streaming method by using DCT-based scalability, and shows the result of experiment. By using suggested scalability, calculations are reduced, and spacial scalability is realized. Moreover, the objective data which meet user's need according to the network condition and choose the appropriate scalability according to the capability of terming can be extracted. And it is possible to apply any resources according to the specificity of image.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.323-326
• /
• 2005

Several video coding standards, such as MPEG-4 and H.263, have been investigated to reduce the resulting number of bits while pursuing the maximum video quality. The recent video coding standard, H.264, provides higher coding efficiency than previous coding standards by using the mode decision scheme. For mode decision, H.264 chooses the best macroblock mode among the several candidates using Lagrangian cost function which reflects both the rate and the distortion. H.264 employs only one rate-distortion optimization (RDO) model for all macroblocks. Since the characteristics of each macroblock is different, each macroblock should have its own RDO model. In this paper, we propose an adaptive rate-distortion optimization algorithm for H.264. We regulate the Lagrangian multiplier considering the picture type and characteristics of each macroblock.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.990-1000
• /
• 2013

This paper describes the scalable extension of High Efficiency Video Coding (HEVC) to provide flexible high-quality digital video content services. The proposed scalable codec is designed on multi-loop decoding architecture to support inter-layer sample prediction and inter-layer motion parameter prediction. Inter-layer sample prediction is enabled by inserting the reconstructed picture of the reference layer (RL) into the decoded picture buffer of the enhancement layer (EL). To reduce the motion parameter redundancies between layers, the motion parameter of the RL is used as one of the candidates in merge mode and motion vector prediction in the EL. The proposed scalable extension can support scalabilities with minimum changes to the HEVC and provide average Bj${\o}$ntegaard delta bitrate gains of about 24% for spatial scalability and of about 21% for SNR scalability compared to simulcast coding with HEVC.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.267-270
• /
• 2003

The DMB recently standardized in Korea is a Eureka-147 DAB(Digital Audio Broadcasting)-based standard which is able to provide multimedia services including moving pictures, still images, text and etc. That has the structure to add the MPEG media codec and the MPEG system, namely, video-multiplexer to the DAB system. In this paper, we analysis the video-multiplexer of the DMB standard and propose a new multiplexer, namely. M4GM(MPEG-4 General Mux) included in the DMB vido-multiplexer for the performance improvement with respect to the transmission efficiency and the expansible functions. In addition, we simulate the two video-multiplexers and then compare and estimate their performance entirely.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.366-373
• /
• 2016

This paper proposes a pre-processing algorithm to improve the coding efficiency of perceptual video coding. First, an input image is decomposed into multiple sub-bands through linear sub-band decomposition. Then, the sub-bands that have low visual sensitivity are suppressed by assigning small gains to them. Experimental results show that if the proposed algorithm is adopted for pre-processing in a High Efficiency Video Coding (HEVC) encoder, it can provide significant bit-saving effects of approximately 12% in low delay mode and 9.4% in random access mode.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.207-210
• /
• 2009

An efficient algorithm to compress high dynamic range (HDR) videos is proposed in this work. We separate an HDR video sequence into a tone-mapped low dynamic range (LDR) sequence and a ratio sequence. Then, we encode those two sequences using the standard H.264/AVC codec. During the encoding, we allocate a limited amount of bit budget to the LDR sequence and the ratio sequence adaptively to maximize the qualities of both the LDR and HDR sequences. While a conventional LDR decoder uses only the LDR stream, an HDR decoder can reconstruct the HDR video using the LDR stream and the ratio stream. Simulation results demonstrate that the proposed algorithm provides higher performance than the conventional methods.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.143-146
• /
• 2011

This paper presents human perception-based video coding method using an online learning framework. In this work, we analyze the relationship between human attention regions and video quality, and also consider human memory. We classify the motion patterns based on the analysis. Then, we devise a motion pattern classification method using Hedge algorithm. Along with the motion patterns, we smooth out the specific regions or sharpen details of the regions using the regional priorities. The preprocessed sequences are applied to the video codec. The performance is excellent on the overall quality as well as the regional quality.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.136-139
• /
• 2017

Recently, many companies and consumers has shown a lot of interest toward VR(Virtual Reality), so many VR devices such as HMD(Head mounted Display) and 360 degree VR camera are released on the market. Current encoded 360 degree VR video uses the codec which originally made for the conventional 2D video. Therefore, the compression efficiency isn't optimized because the en/decoder does not consider the characteristics of the 360 degree VR video. In this paper, we propose a method to improve the compression efficiency by using the reference frame which compensates for the distortions caused by characteristics the 360 degree VR video. Applying the proposed method we were able to increase the compression efficiency by providing better prediction.