• Textile Coloration and Finishing
• /
• v.30 no.1
• /
• pp.29-37
• /
• 2018

Cotton has no adsorption ability for the cationic dye and heavy metal but, if anionized cotton can be made, it will be possible. In this study, to enable the anionisation of cotton fabric, it was modified using sodium vinylsolfonate(SV) as the anionisation reagent, employing a pad-dry-cure(PDC) technique. The effects of curing time, treatment concentrations of urea, sodium hydroxide and SV on the weight increase were experimented and then, the physical characterizations of sulfoethyl cotton(SEC) depending on the finishing conditions were estimated, thus the application possibility of SV as anionisation reagent was investigated. It was not much changed by anionisation except wrinkle recovery. And the structure of SEC was elucidated by Raman and NMR spectoscopy. The feasibility of using Raman and NMR spectroscopy with the band at $1,043cm^{-1}$, and 50.5ppm, respectively as marker band to determine sulfoethyl group of SEC was reported. The total degree of SV substitution(DSV) was determined via elemental analysis. SEC with diverse total DSV up to 0.066 was obtained. In the thermal decomposition(pyrolysis) by DSC, it can be found that the pyrolysis temperature was about $30^{\circ}C$ lower than that of non-treated cotton fabric.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.37-42
• /
• 2001

The BGA package has been the area array package of choice for several years. Recently, the transition has been to finer pitch configurations called Chip Scale Packages (CSP). Several of these package types are available at 0.5 mm pitch. requiring surface mount assemblers to evaluate and optimize various elements of the assembly process. This presentation describes the issues associated with making the transition from BGA to CSP assembly. Areas addressed will include the accuracy of pick and place equipment, printed wiring board lines and spaces, PWB vias, in-circuit test issues, solder paste printing, moisture related factors, rework and reliability. The transition to 0.5 mm pitch requires careful evaluation of the board design, solder paste selection, stencil design and component placement accuracy. At this pitch, ball and board pad diameters can be as small as 0.25 mm and 0.20 mm respectively. Drilled interstitial vias are no longer possible and higher ball count packages require micro-via board technology. The transition to CSP requires careful evaluation of these issues. Normal paste registration and BGA component tolerances can no longer achieve the required process levels and higher accuracy pick and place machines need to be implemented. This presentation will examine the optimization of these critical assembly operations, contrast the challenges at 0.5 mm and also look at the continuation of the process to incorporate smaller pitch flip chip devices.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.04a
• /
• pp.27-34
• /
• 2001

The BGA Package has been the area array package of choice for several rears. Recently, the transition has been to finer pitch configuration called Chip Scale Packages (CSP). Several of these package types are available at 0.5 mm pitch, requiring surface mount assemblers to evaluate and optimize various elements of the assembly process. This presentation describes the issues associated with making the transition from BGA to CSP assembly. Areas addressed will include the accuracy of pick and piece equipment, printed wiring board lines and spaces, PWB vias, in-circuit test issues, solder paste printing, moisture related factors, rework and reliability. The transition to 0.5 mm pitch requires careful evaluation of the board design, solder paste selection, stencil design and component placement accuracy. At this pitch, ball and board pad diameters can be as small as 0.25 mm and 0.20 mm respectively. Drilled interstitial vias are no longer possible and higher ball count packages require micro-via board technology. The transition to CSP requires careful evaluation of these issues. Normal paste registration and BGA component tolerances can no longer achieve the required process levels and higher accuracy pick and place machines need to be implemented. This presentation will examine the optimization of these critical assembly operations, contrast the challenges at 0.5 mm and also look at the continuation of the process to incorporate smaller pitch flip chip devices.

• Nutrition Research and Practice
• /
• v.8 no.6
• /
• pp.618-624
• /
• 2014

BACKGROUND/OBJECTIVES: Isoflavones are widely believed to be beneficial to human health, in relation to their antioxidant potentials. Exercise can cause an imbalance between reactive oxygen species (ROS) and antioxidants. This study was conducted in order to investigate the ability of isoflavones in amelioration of oxidative stress induced by exercise. MATERIALS/METHODS: Male Sprague-Dawley rats were assigned to one of four groups: isoflavone-free with no exercise (CON-sd), isoflavone-free with exercise (CON-ex), isoflavone-supplemented with no exercise (ISF-sd), and isoflavone-supplemented with exercise (ISF-ex). Animals exercised on the treadmill for 30 minutes per day, five days per week. TBARS as a marker of oxidative stress and antioxidant enzyme activity, including SOD, GSH-px, and catalase were determined in liver tissue. Serum lipid profile was also examined. RESULTS: A significant effect of isoflavone alone was observed on abdominal fat pad mass. ISF-ex had significantly less abdominal fat pad than CON-ex. Both exercise and isoflavone treatment had significant effects on lowering plasma triglyceride (TG), thus, the ISF-ex group had a significantly lower TG level than the CON-sd group, by 30.9%. However, no differences were observed in plasma cholesterol, HDL-C, and cholesterol/HDL-C ratio. Exercise, isoflavone, and exercise-isoflavone interaction effects were significant on thiobarbituric acid reactive substances (TBARS) (P = 0.001, 0.002, and 0.005, respectively). The CON-ex group showed a higher TBARS level than the other three groups. By contrast, in the ISF-ex group, TBARS was restored to the level of the ISF-sd or CON-sd group. Isoflavone had a significant effect on superoxide dismutase (SOD) (P = 0.022) and catalase activities (P = 0.049). Significantly higher SOD and catalase activities were observed in ISF-ex than CON-ex. SOD and catalase activities showed an inverse pattern of TBARS. Taken together, isoflavones increased the activities of SOD and catalase with concomitant decreases in TBARS, indicative of decreased oxidative stress. CONCLUSIONS: Isoflavone supplementation enhances antioxidant action with attenuation of exercise-induced oxidative stress, as measured by decreases in TBARS, and inhibits body fat accumulation and plasma TG increase. Antioxidative effects ascribed to isoflavones may be partially exerted via enhancement of antioxidant enzyme activities.

• Journal of Music and Human Behavior
• /
• v.15 no.2
• /
• pp.69-92
• /
• 2018

The purpose of this study was to investigate whether a songwriting intervention would improve self-expression of adolescents with cochlear implants (CI). In this study, the songwriting intervention was designed to incorporate previous research findings on music perception of individuals with CIs and to provide musical experiences in which adolescents with CIs could be successful in using music resources for their self-expression. Accordingly, stepwise songwriting procedures were constructed and music technology (i.e., GarageBand as an iPad application) was used. Two adolescents with CIs participated in the intervention once a week for 8 weeks. Changes in level of participation in songwriting tasks, verbal expression, self-reports about the songwriting process were examined. The results demonstrated that the participants showed increased attempts to express themselves via music making. It was also shown that their negative perception of their ability to verbally express themselves decreased. They were observed as becoming more competent in creating music by deciding how various musical elements should be played and making rhythm or melodic patterns by themselves. These results indicate that the songwriting intervention can facilitate self-expression of adolescents with CIs. Further implications in terms of the psychosocial needs of individuals with CIs are presented.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.477-484
• /
• 2011

Purpose: Retro-orbicularis oculi fat (ROOF) and preseptal fat pad (PSF) are deep fat structures of frontal and supraorbital area, that encounter galeal fat pad (GFP). If galeal wall is weakened by aging process, GFP loses its anchoring structure, moved downward pushing ROOF and PSF. This especially occur in lateral brow area. As a result of drooping, eyebrow affects the eyelid covering PSF as a sac descended to a lateral hooding and ptotic eyelid simultaneously. Consequently, in the case of lateral hooding and brow ptosis, besides the skin, deep fat structures (ROOF and PSF) should be corrected as well. Methods: ROOF-PSF repositioning technique in subbrow resection were performed. 21 cases of patients from April, 2007 to January, 2008. Before surgery, all patients were examined carefully to evaluate the degrees of dermatochalasia, drooping of the eyebrow, marginal reflex distance 1 (MRD1), eyelid crease height. Surgery was performed under local anesthesia, then excised the drooped eyelid skin by lateral subbrow resection, removed proper amount of ROOF, repositioned ROOF-PSF at the supraorbital rim, and fix it on periosteum. During follow up periods, the patients were surveyed of the satisfaction of surgery, and postoperative MRD1 was evaluated. Results: One patient had a hematoma on left eyebrow, and another one patient had a numbness on left forehead for two months. Except for these two patients, all patients had good results without any significant complications. The mean follow up period was about 5 months, and the position of lateral eyebrow maintained above the supraorbital rim in all cases. Postoperatively, MRD1 increased by 0.8 mm in 5-months mean follow up period. Conclusion: In patient with lateral brow ptosis and lateral hooding, the ROOF-PSF repositioning technique in sub-brow resection could be a good operative option.

• Journal of Nutrition and Health
• /
• v.37 no.4
• /
• pp.273-280
• /
• 2004

This study was conducted to examine the effect of dietary iron levels on lipid metabolism, antioxidative and antithrombogenic capacities in 16-month-old rats. Thirty-two Sprague-Dawley male 16-month-old rats weighing 618 $\pm$ 6 g were raised for 10 days with medium-iron diet (35 ppm in diet) and blocked into 4 groups according to their body weights. One of groups was sacrificed to obtain initial data and the rest 3 groups were raised for 3 months with experimental diets containing different levels of iron (5 ppm, 35 ppm, and 350 ppm). Total lipid, triglyceride and total chole-sterol concentrations in plasma and liver, HDL-cholesterol concentration in plasma, fecal total lipid triglyceride and total cholesterol excretions, thiobarbituric acid reactive substances (TBARS) level in plasma LDL + VLDL (low density lipoprotein + very low density lipoprotein) fractions, blood-clotting time and eicosanoids levels in plasma were measured. The results are as follows: Plasma total lipid, triglyceride and total cholesterol concentrations, TBARS level in plasma LDL + VLDL fractions were increased and blood-clotting time tended to be shortened during 3 months of experimental period. Low (5 ppm) iron diet improved lipid metabolism via increasing HDL-cholesterol and fecal choles-terol excretion. High (350 ppm) iron diet decreased plasma total lipid, triglyceride and total cholesterol concentrations as compared to medium (35 ppm) iron diet and lowered body weight and epididymal fat pad weight. On the other hand, TBARS level in plasma LDL + VLDL fractions and blood-clotting time were increased with high iron diet. It is plausible that low iron diet improves lipid metabolism, antioxidative and antithrombogenic capacities in 16-month-old rats.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.294-301
• /
• 2020

Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

• International Journal of Oral Biology
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2017

In the present study, we investigated the role of peripheral ionotropic receptors in artemin-induced thermal hyperalgesia in the orofacial area. Male Sprague-Dawley rats weighting 230 to 280 g were used in the study. Under anesthesia, a polyethylene tube was implanted in the subcutaneous area of the vibrissa pad, which enabled drug-injection. After subcutaneous injection of artemin, changes in air-puff thresholds and head withdrawal latency time were evaluated. Subcutaneous injection of artemin (0.5 or $1{\mu}g$) produced significant thermal hyperalgesia in a dose-dependent manner. However, subcutaneous injection of artemin showed no effect on air-puff thresholds. IRTX ($4{\mu}g$), a TRPV1 receptor antagonist, D-AP5 (40 or $80{\mu}g$), an NMDA receptor antagonist, or NBQX (20 or $40{\mu}g$), an AMPA receptor antagonist, was injected subcutaneously 10 min prior to the artemin injection. Pretreatment with IRTX and D-AP5 significantly inhibited the artemin-induced thermal hyperalgesia. In contrast, pretreatment with both doses of NBQX showed no effect on artemin-induced thermal hyperalgesia. Moreover, pretreatment with H-89, a PKA inhibitor, and chelerythrine, a PKC inhibitor, decreased the artemin-induced thermal hyperalgesia. These results suggested that artemin-induced thermal hyperalgesia is mediated by the sensitized peripheral TRPV1 and NMDA receptor via activation of protein kinases.