• Advances in aircraft and spacecraft science
• /
• v.4 no.3
• /
• pp.219-235
• /
• 2017

The large container ships and fast patrol boats are complex marine structures. Therefore, their global mechanical behaviour has long been modeled mostly by refined beam theories. Important issues of cross section warping and bending-torsion coupling have been addressed by introducing special functions in these theories with inherent assumptions and thus compromising their robustness. The 3D solid Finite Element (FE) models, on the other hand, are accurate enough but pose high computational cost. In this work, different marine vessel structures have been analysed using the well-known Carrera Unified Formulation (CUF). According to CUF, the governing equations (and consequently the finite element arrays) are written in terms of fundamental nuclei that do not depend on the problem characteristics and the approximation order. Thus, refined models can be developed in an automatic manner. In the present work, a particular class of 1D CUF models that was initially devised for the analysis of aircraft structures has been employed for the analysis of marine structures. This class, which was called Component-Wise (CW), allows one to model complex 3D features, such as inclined hull walls, floors and girders in the form of components. Realistic ship geometries were used to demonstrate the efficacy of the CUF approach. With the same level of accuracy achieved, 1D CUF beam elements require far less number of Degrees of Freedom (DoFs) compared to a 3D solid FE solution.

• Journal of Navigation and Port Research
• /
• v.46 no.5
• /
• pp.435-440
• /
• 2022

The development and introduction of a Maritime Autonomous Surface Ship (MASS) are some of the most important changes leading to the fourth industrial era in the maritime area. The term 'MASS' refers to a ship operating independently, without human intervention, to reduce maritime accidents caused by human errors. Recent UK findings MASS also noted that particularly the dynamic positioning system will be considered to apply as newly function to a MASS. The DP system, a ship system developed decades ago and used for specific purposes like offshore operations, provides various functions to facilitate the accurate movements of the vessel, and operators can make decisions within the DP system, in addition to the ordinary ship system. In this paper, it would like to present the connection and application method with the main technical elements of the DP system in connection with the main technology of the DP system to achieve the safe operation of a MASS. In particular, among various position reference systems, the capability plot function of DP system, and the "follow target" mode in the operation mode are attractive functions that can contribute to the safe operation of autonomous ships.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4125-4133
• /
• 2022

KAERI (Korea Atomic Energy Research Institute) developed the conceptual design of PGSFR (Prototype Gen-IV Sodium Cooled Fast Reactor) and Burner Reactor. Since the reactor characteristics of the PGSFR and Burner Reactor are different, the shape, size and the arrangement of the main components in the reactors must be different. Therefore, the conceptual design for the fuel handling and transfer systems needs to be performed coinciding with the structure of the reactor. Especially, because a redan structure dividing hot and cold pool is installed in the reactor vessel, the conceptual design of the fuel handling and transfer system largely changes depending on the location of the redan structure. Various elements of the conceptual design and an integral arrangement for the fuel handling and transfer system were arranged according to the characteristics, sizes and shapes of the reactors. In this paper, the conceptual designs of the fuel handling and transfer system for PGSFR and Burner Reactor are described. Especially, an A-frame method is selected as the fuel handling and transfer system for the Burner Reactor, considering the layout of the internal structure. The tilt angle, diameter and length of A-frame is determined and the strength evaluation of the A-frame is performed.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1036-1044
• /
• 2023

The combination of MCNP6 and the FISPACT codes was used to predict inventories of radioisotopes produced by neutron exposure of a sample in a research reactor. The detailed MCNP6 model of the Budapest Research Reactor and the specific irradiation geometry of the NAA channel was established, while realistic material cards were specified based on concentrations measured by PGAA and NAA, considering the precursor elements of all significant radioisotopes. The energy- and spatial distributions of the neutron field calculated by MCNP6 were transferred to FISPACT, and the resulting activities were validated against those measured using neutron-irradiated small and bulky targets. This approach is general enough to handle different target materials, shapes, and irradiation conditions. A general agreement within 10% has been achieved. Moreover, the method can also be made applicable to predict the activation properties of the near-vessel concrete of existing nuclear installations or assist in the optimal construction of new nuclear power plant units.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.375-384
• /
• 2016

This study aimed to specify Vessel Traffic System(VTS) operators' situational awareness(SA) tasks and examine differences in subjective ratings for three levels of SA. Data for relative frequencies of SA tasks were collected by using direct in field observation. Subjective rating scores were obtained using a questionnaire method and compared in terms of VTS operator's gender and length of service career. The results are as follows. First, it was found that the VTS operators perform information perception task elements more frequently than those for information integration and prediction. Second, VTS operators tended to show subjectively lower evaluation scores for prediction than information perception or integration. Third, male VTS operators rated their SA ability higher than females. Fourth, the male VTS operators more than 15 years of career service showed higher subjective rating scores than those with under 5 years of service. Female VTS operators with different levels of career service showed a similar level of subjective rating scores. These results suggest that the frequency of SA related tasks and subjective SA evaluation can differ in terms of SA levels and individual differences.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.239-245
• /
• 2016

In the midst of continuing international recession, the rate of maritime traffic and marine leisure markets are consistently growing. The Republic of Korea controls the marine traffic volume through vessel traffic centers and various other management facilities. Nevertheless, the continuous growth and complexity of marine traffic is resulting in repeated occurrences of marine accidents. Recovery is very difficult in cases of human injuries or deaths caused by marine accidents due to its nature, and the scale of marine accidents is also becoming greater with advanced ship building technologies. Passenger ships, oil tankers, and other such vessels used for specific purposes requires a more detailed navigational status surveillance and analysis, and numerous research has been conducted with an objective for monitoring such special purpose vessels. However, the data elements transmitted from the ocean to the shore station are limited to AIS and ARPA. We are implementing IoT ship sensor collection and a syncing system capable of transmitting various ship sensing data to the shore station, and also proposing a Safe Navigation Status Analysis System utilizing the collected data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.635-641
• /
• 2016

In order to drive a hybrid propulsion device which combines an engine and an electric propulsion unit, battery packs that contain dozens of unit cells consisting of a lithium-based battery are used to maintain the power source. Therefore, it is necessary to more strictly manage a number of battery cells at any given time. In order to manage battery cells, generally voltage, current, and temperature data under load condition are monitored from a personal computer. Other important elements required to analyze the condition of the battery are the internal resistances that are used to judge its state-of-health (SOH) and the open-circuit voltage (OCV) that is used to check the battery charging state. However, in principle, the internal resistances cannot be measured during operation because the parallel equivalent circuit is composed of internal loss resistances and capacitance. In most energy storage systems, battery management system (BMS) operations are carried out by using data such as voltage, current, and temperature. However, during operation, in the case of unexpected battery cell failure, the output voltage of the power supply can be changed and propulsion of the hybrid vehicle and vessel can be difficult. This paper covers the implementation of a high safety battery management system (HSBMS) that can estimate the OCV while the device is being driven. If a battery cell fails unexpectedly, a DC power supply with lithium iron phosphate can keep providing the load with a constant output voltage using the remainder of the batteries, and it is also possible to estimate the internal resistance.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.31-55
• /
• 1986

Generally, the development of shipping is characterized by the amount of traffic flow (traffic volume) and seaborne cargo in the sea. Movement of ships is an essential element of constructing the traffic flow which is represented the dynamic movement of ships in the sea, but on the other band the numbers of arriving and departing the port is the basic factor consisting of the static movement of ships. The amount of cargoes by coastal vessels and ocean trade vessels have increased tremendously with the great growth of the Korean economy these days. This increase of the seaborne cargoes has made the Korean coastal traffic flow so congested that this can be a cause of large pollution as well as great marine casualities such as a loss of human lives and properties . And also the future coastal traffic is expected to increase considerably according to our economic development and high dependence upon foreign trade. Under the circumstance, to devise the safety of coastal traffic flow and to take a proper step of a efficient navigation, there is a necessity for analyzing and surveying the coastal traffic trend and the characteristics of cargo movement. In order to grasp the dynamic movement of ships in the Korean coast, O/D analysis is executed. This paper aims to secure the basic data necessary for a comprehensive plan and estimation of vessel traffic management system for the enhancement of safety, order and efficiency of vessel traffic in the Korean coast. The analyzed results of the traffic flow and seaborne cargoes of the Korean coast are summarized as follows : 1) The congestion by the vessels occurred around the ports such as-in proportion of ship's number (proportion of tonnage) -Incheon 18.5%(14.8%), Pohang 5.9% (9.9%), Samil 5.2%(8.3%), Mokpo 8.6%(0.8%), Pusan 13.5%(36.4%), Ulsan 9.1%(16.2%). 2) It is found that the area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed thatthe area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed that the coastal vessels are main elements constituting the coastal traffic and that there are much traffic flow among five ports as following through the precise O/D analysis of ship's coastal movement. Incheon-Samil, Ulsan, Pusan, Jeju Pusan -Samil, Ulsan, Incheon, Jeju Pohang -Samil, Inchoen, Jeju Pohang -Samil, Incheon, Jeju Ulsan -Samil, Incheon, Jeju Samil -Ulsan, Pusan, Incheon 4) The amount of cargoes to abroad are in proportion about 81% of total and the amount of coastal cargoes are about 19%. Of those, cargoes in and out to Japan are about 26% and to South-east Asia are about 27%. 5) The chief items of foreign cargoes are oil(38.33%), iron ore(13.98%), bituminoous coal(12.74%), grain(8.02%), lumber(6.45%) in the import cargoes and steel material(21.96%), cement(17.16%), oil(6.81%), fertilizer(3.80%) in the export cargoes. 6) The 80.5% of total export cargoes and 92.4% of total import cargoes are flowed in five main ports. 7) The chief items of coastal cargoes are oil (42.45%), cement(16.86%), steel material (6.49%), anthracite(6.31%), mineral product(4.3%), grain, and fertilizer. Almost 92.24% of total import and export oil cargoes in Korea is loaded and unloaded at the port of Samil & Ulsan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.409-414
• /
• 2021

Tightness performance that blocks compartments is important for surface ships to achieve superior mission performance and survivability in combat environments. To meet the above requirements, airtightness of the structural elements and the appropriate strength to specific areas are checked during a test run after ship construction. In particular, air tests of compartments adjacent to the water surface are performed. In an air test, air is injected into the compartment up to the test pressure of the test memo. The pressure drop value is checked after 10 minutes to determine if the requirements of the corresponding area are satisfied. In summer, however, when the influence of the outside temperature is large, a phenomenon in which the internal pressure increases during the air test was identified. This phenomenon reduces the reliability of the test result. Therefore, a system was designed to compensate for temperature changes in the compartments through this study. The developed system calculates the amount of pressure change caused by a temperature change in the compartment and outputs a correction value. The pressure change was calculated using the ideal gas equation, reflecting the maintenance, increase, and decrease in temperature during the test process. A comparison of the calculated pressure correction value with the database of NIST REFPROP revealed a difference of 0.126% to a maximum of 0.253%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.158-166
• /
• 2004

The optimal conditions are obtained for the decomposition of solid radioactive wastes, including ion exchange resin, zeolite, active charcoal, and sludge from nuclear power plant. In the process of decomposing the radioactive wastes were used the microwave acid digestion method with mixed acid. The solution after acid digestion by the following method was colorless and transparent. Each solution was analyzed with ICP-AES and AAS and the recovery yield for 5 different elements added the simulated radioactive wastes were over 94%. As an effective pre-treatment, the proposed microwave acid digestion conditions concerning the chemical trait of each radioactive waste are expected to be generally applied to above-mentioned radioactive wastes from nuclear power plant hereafter.