• The Korean Journal of Mycology
• /
• v.27 no.6 s.93
• /
• pp.394-398
• /
• 1999

Taxonomic and genetic analysis of Phytophthora species belonging to six different morphological groups (GI, GII, GIII, GIV, GV, GVI) was conducted using RAPD method. Amplified fragments ranged $0.3{\sim}3.2$ kb in their molecular weights. Among total of 145 bands, there were 109 polymorphic bands. Seven isolates of P. infestans showed high similarities of $0.92{\sim}0.99$, and P. infestans isolate 3 from potato showed similarities of $0.93{\sim}0.95$ compared with other P. infestans. Among isolates of P. capsici, similarities of $0.77{\sim}0.86$ were observed and they were grouped in 80% level. P. cinnamomi and P. cryptogea isolates which belonging to group GVI showed very similar RAPD fingerprinting pattern. Primers OPA-04, OPA-17, OPA-18, OPA-19, and OPB-12 showed high level of differences among the tested isolates in major bands and molecular weights. The similarity between the isolates was 0.67. P. megasperma and P. sojae in group GV showed similarity of 0.65. These two isolates showed big differences in single major band in reactions with primers OPA-08, OPA-17, and OPA-19. Phytophthora-specific and P. infestans-specific molecular markers were also selected with one of the random primers tested. In reaction with primer OPA-20, all the genus Phytophthora showed common band at 600 bp, and all the P. infestans isolates showed specific band at 680 bp. These markers can be useful for identification of Phytophthora speices or P. infestans. As a result, P. infestans isolated from tomato and/or potato can easily be differentiated from other Phytophthora species with this primer.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3208-3212
• /
• 2012

Controlled drug delivery systems employing microparticles offer lots of advantages over conventional drug dosage formulations. Microencapsulation technique have been conducted with biodegradable polymers such as poly(lactic-co-glycolic acid) (PLGA) and poly(lactic acid) (PLA) for its adjustable biodegradability and biocompatibility. In this study, we evaluated two techniques, oil-in-water (o/w) emulsion solvent evaporation and spray drying, for preparation of polymeric microparticles encapsulating a newly synthesized drug, SS-AG20, for the long-term drug delivery of this low-molecular-weight drug with a very short half-life. Drug-loaded microparticles prepared by the solvent evaporation method showed a smoother morphology; however, relatively poor encapsulation efficiency and drastic initial burst were discovered as drawbacks. Spray-dried drug-loaded microparticles had an imperfect surface with pores and distorted portions so that its initial burst was critical (70.05-87.16%) when the preparation was carried out with a 5% polymeric solution. By increasing the concentration of the polymer, the morphology was refined and undesirable initial burst was circumvented (burst was reduced to 35.93-74.85%) while retaining high encapsulation efficiency. Moreover, by encapsulating the drug with various biodegradable polymers using the spray drying method, gradual and sustained drug release, for up to 2 weeks, was achieved.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.36.2-36.2
• /
• 2009

Low dielectric materials have been great attention in the semiconductor industry to develop high performance interlayer dielectrics with low k for Cu interconnect technology. In our study, the dielectric properties of SiOC /SiO2 thin film derived from polyphenylcarbosilane were investigated as a potential interlayer dielectrics for Cu interconnect technology. Polyphenylcarbosilane was synthesized from thermal rearrangement of polymethylphenylsilane around $350^{\circ}C{\sim}430^{\circ}C$. Characterization of synthesized polyphenylcarbosilane was performed with 29Si, 13C, 1H NMR, FT-IR, TG, XRD, GPC and GC analysis. From FT-IR data, the band at 1035 cm-1 is very strong and assigned to CH2 bending vibration in Si-CH2-Si group, indicating the formation of the polyphenylcarbosilane. Number average of molecular weight (Mn) of the polyphenylcarbosilane synthesized at $400^{\circ}C$ for 6hwas 2, 500 and is easily soluble in organic solvent. SiOC/SiO2 thin film was fabricated on ton-type silicon wafer by spin coating using 30wt % polyphenylcarbosilane incyclohexane. Curing of the film was performed in the air up to $400^{\circ}C$ for 2h. The thickness of the film is ranged from $1{\mu}m$ to $1.7{\mu}m$. The dielectric constant was determined from the capacitance data obtained from metal/polyphenylcarbosilane/conductive Si MIM capacitors and show a dielectric constant as low as 2.5 without added porosity. The SiOC /SiO2 thin film derived from polyphenylcarbosilane shows promising application as an interlayer dielectrics for Cu interconnect technology.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.5
• /
• pp.425-429
• /
• 2016

Objective : Rod-screw fixation systems are widely used for spinal instrumentation. Although many biomechanical studies on rod-screw systems have been carried out, but the effects of rod contouring on the construct strength is still not very well defined in the literature. This work examines the mechanical impact of straight, $20^{\circ}$ kyphotic, and $20^{\circ}$ lordotic rod contouring on rod-screw fixation systems, by forming a corpectomy model. Methods : The corpectomy groups were prepared using ultra-high molecular weight polyethylene samples. Non-destructive loads were applied during flexion/extension and torsion testing. Spine-loading conditions were simulated by load subjections of 100 N with a velocity of $5mm\;min^{-1}$, to ensure 8.4-Nm moment. For torsional loading, the corpectomy models were subjected to rotational displacement of $0.5^{\circ}\;s^{-1}$ to an end point of $5.0^{\circ}$, in a torsion testing machine. Results : Under both flexion and extension loading conditions the stiffness values for the lordotic rod-screw system were the highest. Under torsional loading conditions, the lordotic rod-screw system exhibited the highest torsional rigidity. Conclusion : We concluded that the lordotic rod-screw system was the most rigid among the systems tested and the risk of rod and screw failure is much higher in the kyphotic rod-screw systems. Further biomechanical studies should be attempted to compare between different rod kyphotic angles to minimize the kyphotic rod failure rate and to offer a more stable and rigid rod-screw construct models for surgical application in the kyphotic vertebrae.

• Archives of Pharmacal Research
• /
• v.27 no.5
• /
• pp.570-575
• /
• 2004

2-Hydroxymuconic semialdehyde (2-HMS) dehydrogenase catalyzes the conversion of 2-HMS to 4-oxalocrotonate, which is a step in the meta cleavage pathway of aromatic hydrocarbons in bacteria. A tomC gene that encodes 2-HMS dehydrogenase of Burkholderia cepacia G4, a soil bacterium that can grow on toluene, cresol, phenol, or benzene, was overexpressed into E. coli HB 101, and its gene product was characterized in this study. 2-HMS dehydrogenase from B. cepacia G4 has a high catalytic efficiency in terms of V$_{max}$K$_{max}$ towards 2-hydroxy-5-methyl-muconic semialdehyde followed by 2-HMS but has a very low efficiency for 5-chloro-2-hydroxymuconic semialdehyde. However, the enzyme did not utilize 2-hydroxy-6-oxo-hepta 2,4-dienoic acid and 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid as substrates. The molecular weight of 2-HMS dehydrogenase from B. cepacia G4 was predicted to be 52 kDa containing 485 amino acid residues from the nucleotide sequence of the tomC gene, and it exhibited the highest identity of 78% with the amino acid sequence of 2-HMS dehydrogenase that is encoded in the aphC gene of Comamonas testosteroni TA441. 2-HMS dehydrogenase from B. cepacia G4 showed a significant phylogenetic relationship not only with other 2-HMS dehydrogenases, but also with different dehydrogenases from evolutionarily distant organisms.sms.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.11 no.1
• /
• pp.49-52
• /
• 2013

Fentanyl, a synthetic, highly selective opioid ${\mu}$-receptor agonist, is 50 to 100 times more potent than morphine. The low molecular weight, high potency, great transdermal permeation rate and lipid solubility of fentanyl make it very suitable for transdermal administration. Durogesic is a novel matrix transdermal system providing continuous systemic delivery of fentanyl. In recently, there are many reports that misused or overused fentanyl transdermal patches result in severe intoxication of fentanyl. We present a case of fentanyl toxicity with misused durogesic transdermal patch and discuss the safe and appropriate application of the patches. In conclusion, fentanyl patches should be used in opioid tolerant patients and prescribed at the lowest possible dose and titrated upward as needed. All patients and their caregivers should be educated safe application of fentanyl patches and advised to avoid exposing the patches application site to direct external heat sources, such as heating pads, or electric blankets, heat lamps, sauna, hot tubs, and others. In addition, concomittant medications that affect fentanyl's metabolism should be avoided.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.470-476
• /
• 1991

The distribution of peroxidase activity in 9 kinds of cruciferous plants was investigated. Among the plants examined, peroxidase activity was found to be high levels in roots of Chinese cabbage. One kind of peroxidase was purified approximately 56-fold from crude extracts of Chinese cabbage roots. The molecular weight of the enzyme was 50, 000 and consisted oif a single polypeptide chain, as estimated by sodium dodecyl sulfate polyacrylamide gel electrophoresis and Sephadex G-150 gel column chromatography. The enzyme showed optimum activity at pH 7.0 and $50^{\circ}C$. Phenol and phenol derivatives serves as substrates of the enzyme and Km value for $H_2O_2$ was 1.6 mM toward pyrogallol. The enzyme showed a Soret band at 406 nm and this result indicate that the enzyme contained heme as a prosthetic group. The immunochemical and electrophoretic properties of purified peroxidase from Chinese cabbage were very similar to horseradish peroxidase.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.3
• /
• pp.241-250
• /
• 1987

A total 64 strains of Escherichia coli including 38 strains of urinary tract infection and 26 strains from other clincal sources were studied for several properties related to the virulence markers of organisms. Urinary isolates(76.3%) showed higher frequency of mannose resistant hemagglutination(MRHA) wi th human erythrocytes(A type, $Rh^+$) than the strains of control group isolated from other sources(34.6%). Seventeen strains(44.4%) of urinary isolates and 2 strains(7.7%) of control group showed hemolysis on blood agar plate. There was no significant difference in MIC's of 23 drugs between both groups of urinary isolates and control group. But they showed high frequency of resistance to ampicillin, carbenicillin, piperacillin, kanamycin, and trimethoprim, but were very susceptible to cefotaxime, moxalactam, ceftizidime, imipenem, and norfloxacine. Fourteen strains(36.8%) of urinary isolates and 10 strains(38.5%) of control group showed conjugally transferable resistance conferred to R plasmids. The urinary isolates carried one or more to 6(mean 3.4) plasmids of approximate molecular weight ranged 3.1 to 94 megadalton(Mdal) and strains of control group carried 2 to 5(mean 3.8) plasm ids of size ranged 3.6 to 130 Mdal. The size of conjugally transferable R plasmid identified with transconjugants ranged 32 to 130 Mdal.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.133-148
• /
• 1987

Gibberellin(GA) 3-$\beta$ hydroxylation is very important for the shoot elogation in the higher plants, since only 3$\beta$-hydryoxylated GAs promote shoot elogation in several plants. Fluctuation of 3$\beta$-hydryoxylase activity was examined during seed maturation using two cultivars of , P. vulgaris, Kentucky Wonder (normal) and Masterpiece (dwarf). Very immature seeds of both cultivars contain high level of 3$\beta$-hydroxylase activity (per mg protein). Both cultivars showed maximum of enzyme activity (per seed) in the middle of their maturation process. Gibberellin 3$\beta$-hydroxylase catalyzing the hydroxylation of GA20 to GA1 was purified 313-fold from very early immature seeds of P. vulgaris. Crude soluble enzyme extracts were purified by 15% methanol precipitation, hydrophobic interaction chromatogrphy, DEAE ion exchange column chromatography and gel filtration HPLC. The 3$\beta$-hydroxylase activity was unstable and lost much of its activity duting the purification. The molecular weight of purified enzyme was extimated to be 42, 000 by gel filtration HPLC and SDS-PAGE. The enzyme exhibited maximum activity at pH 7.7. The Km values for [2.3-3H] GA20 and [2.3-3H]GA9 were 0.29 $\mu$M and 0.33 $\mu$M, respectively. The enzyme requires 2-oxoglutarate as a cosubstrate; the Km value for 2-oxoglutarate was 250 $\mu$M using 3H GA20 as a substrate. Fe2+ and ascorbate significantly activated the enzyme at all purification steps, while catalase and BSA activated the purified enzyme only. The enzyme was inhibited by divalent cations Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Hg2+. Effects of several GAs and GA anaogues on the putrified 3$\beta$-hydroxylase were examined using [3H]GA9 and GA20 as a substrates. Among them, GA5, GA9, GA15, GA20 and GA44 inhibited the enzyme activity. [13C, 3H] GA20 was converted by the partially purified enzyme preparation to [13C, 3H]GA1, GA5 and GA6, which were identified by GC-MS, GA9 was converted only GA4, GA15 and GA44 were converted to GA37 and GA38, respectively. GA5 was epoxidized to GA6 by the preparation. This suggests that 3$\beta$-hydroxylation of GA20 and epoxidation of GA5 are catalyzed by the same enzyme in P, vulgaris.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2008

To obtain maximal efficacy with minimal systemic side-effects, many studies have been carried out to achieve the controlled release of 5-fluorouracil (5-FU). In this study, biodegradable poly(L-lactide) (L-PLA) microparticles containing 5-FU were prepared by a process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide. The effects of various organic solvents, drug/polymer feeding ratio, polymer molecular weight, and blending with the same polymers with different molecular weights on the formation of 5-FU loaded microparticles were investigated under a predetermined operating condition from our previous study. The drug recovery, entrapment efficiency, and in vitro drug release kinetics were determined by HPLC assays. The drug recovery obtained from the ASES process was found to be very high, whereas the drug entrapment efficiency was considerably low in all the experiments due to the poor affinity between L-PLA and 5-FU. These results indicated that the precipitation rate of L-PLA might be quite different from that of 5-FU so that there was little chance to form 5-FU loaded L-PLA microparticles.