• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.35-38
• /
• 1990

Depths of the vertical cracks in the concrete were determined by the time of flight of the ultrasonic waves. The ultrasonic waves are diffracted at the crack tip, and the arrival time of ultrasonic waves are dependent on the crack depth and speration distance between transmitting and receiving ultrasonic transducers. The vertical cracks with 0.2-2mm width and 10-100mm depth were examined by multi-layered ultrasonic transducers. It was found that the time of flight of ultrasonic waves were proportional to the depth of vertical cracks. The depth of vertical cracks in the range of 20-100mm depth could be determined by the transient time of the diffracted ultrasonic waves

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.627-636
• /
• 2002

Identification and sizing of surface breaking vertical cracks using angle beam ultrasonic testing in practical situation quite often become very difficult tasks due to the presence of non-relevant signals caused by geometric reflectors. The present work introduces effective and systematic approaches to take care of such a difficulty by use oi angle beam ultrasonic testing models that can predict the expected signals from various targets very accurately. Specifically, the model-based TIFD (Technique for Identification of Flaw signals using Deconvolution) is Proposed for the identification of the crack tip signals from the non-relevant geometric reflection signals. In addition, the model-based Size-Amplitude Curve is introduced for the reliable sizing of surface breaking vertical cracks.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.965-981
• /
• 2017

Stability of vertical escarpments has been the subject of discussion for long time. However, available literature provides scarce knowledge about the effect of the formation of undercut and surface cracks on the stability of a vertical escarpment. The present study deals with a systematic analysis of the effect of surface cracks and undercut on slope stability using finite element based lower bound limit analysis. In the present analysis, the non-dimensional stability factor (${\gamma}H/c$) is used to inspect the degrading effect of undercut and cracks developed at different offset distances from the edge of the vertical escarpment. Failure patterns are also studied in detail to understand the extent and the type of failure zone which may generate during the state of collapse.

• 암석학회지
• /
• 제17권4호
• /
• pp.238-244
• /
• 2008

국보 제 112호로 지정되어 있는 감은사지 삼층석탑(서탑)은 표면 풍화로 인한 훼손 상태가 심각하여 빠른 시간 내에 보수되어야 한다. 표면균열에 대한 부분적인 관찰 결과 2층 탑신면에는 수직균열이 발달한다. 이는 상하로 작용하는 강한 주 압축력에 평행하게 발달한 균열이 더욱 더 성장한 것이라고 판단된다. 균열 성장의 원인에는 이미 존재하던 수직균열을 이용한 화학적 풍화작용 및 생물학적 풍화작용이 가세했을 가능성이 높다. 3층 옥개석의 경우 표면균열은 북동방향과 북서방향으로 교차하는 향상으로 발달하고 있다. 3층 옥개석의 동쪽과 남쪽에서 많은 수의 균열이 관찰되며, 중심축에서 바깥쪽으로 잇는 수직균열과 바깥쪽의 수평균열들이 발달하고 있다. 한편, 3층 옥개석의 서쪽과 북쪽은 균열이 많이는 관찰되지 않으며, 대부분 수평균열이 발달하고 있다. 이는 중심축에서의 압축력이 모든 방향으로 동일하지 않으며, 무게 중심이 동쪽과 남쪽 방향으로 기울어져 이 방향으로 강한 압축력이 제공되는 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.237-255
• /
• 2015

From the related engineering principles, analytical solutions for horizontal crack initiation and propagation on a coal panel floor-underlying strata interface due to coal panel excavation are derived in this paper. Two important concepts, namely the critical panel width of horizontal crack initiation on the panel floor-underlying strata interface and the critical panel width of vertical fracture (crack) initiation in the panel floor, have been presented. The resulting analytical solution indicates that: (1) the first criterion can be used to express the condition under which horizontal plane cracks (on the panel floor-underlying strata interface or in the panel floor because of delamination) due to the mining induced vertical stress will initiate and propagate; (2) the second criterion can be used to express the condition under which vertical plane cracks (in the panel floor) due to the mining induced horizontal stress will initiate and propagate; (3) this orthogonal set of horizontal and vertical plane cracks, once formed, will provide the necessary weak network for the flow of gas to inrush into the panel. Two characteristic equations are given to quantitatively estimate both the critical panel width of vertical fracture initiation in the panel floor and the critical panel width of horizontal crack initiation on the interface between the panel floor and its underlying strata. The significance of this study is to provide not only some theoretical bases for understanding the fundamental mechanism of a longwall floor gas inrush problem but also a benchmark solution for verifying any numerical methods that are used to deal with this kind of gas inrush problem.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.50-50
• /
• 2004

• 화약ㆍ발파
• /
• 제23권2호
• /
• pp.45-56
• /
• 2005

본 연구에서는 철근 콘크리트 기둥 발파시 수직하중과 철근의 영향에 따른 파쇄형태 및 파쇄체적에 대해 축소모형실험을 수행하였다. 수직하중이 증가할수록 수직하중에 의한 수직방향의 인장균열 및 철근에 의한 수직방향의 균열이 발생하였으며, 2.0톤에서는 수직방향의 인장균열이 철근에 의한 수직방향의 균열보다 우세하게 나타났다. 또한 수직하중이 증가할수록 수직방향의 인장균열이 우세하여 철근의 휨정도는 감소하였다. 발파공수가 증가하여도 수직하중에 따른 평균 파쇄체적은 크게 증가하지 않았으며, 이는 철근이 파쇄체적에 영향을 미치는 것으로 판단된다. 따라서 콘크리트 기둥 발파시 수직하중은 콘크리트의 파쇄형태와 철근의 휨정도에 중요한 영향을 미치며 철근은 파쇄체적에 영향을 미친다. 그러므로 철근 콘크리트 기둥 발파해체시 수직하중과 철근의 영향에 따라 천공패턴 및 발파패턴을 조절해야 한다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.49-58
• /
• 2018

Open-mode cracks could be commonly observed in layered rocks. A concept model is firstly used to explore the mechanism of the vertical cracks (VCs) in the top layer. Then the crack behaviour of the two-layer model is simulated based on a cohesive zone model (CZM) for layer interfaces and a plastic-damage model for rocks. The model indicates that the tensile stress normal to the VCs changes to compression if the crack spacing to layer thickness ratio is lower than a threshold. The results indicate that there is a threshold for interfacial shear strength that controls the crack patterns of the layered system. If the shear strength is lower than the threshold, the top layer is meshed by the VCs and interfacial cracks (ICs). When the shear strength is higher than the threshold, the top layer is meshed by the VCs and parallel cracks (PCs). If the shear strength is comparative to the threshold, a combining pattern of VCs, PCs and ICs for the top layer can be formed. The evolutions of stress distribution in the crack-bound block indicate that the ICs and PCs can reduce the load transferred for the substrate layer, and thus leads to a crack saturation state.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.204-206
• /
• 2008

In this paper, we proposed the recognition method that automatically extracts cracks from a surface image acquired by a digital camera and recognizes the directions (horizontal, vertical, -45 degree, and 45 degree) of cracks using the fuzzy single layer perceptron. We compensate an effect of light on a concrete surface image by applying the closing operation, which is one of the morphological techniques, extract the edges of cracks by Sobel masking, and binarize the image by applying the iterated binarization technique. Two times of noise reduction are applied to the binary image for effective noise elimination. After the specific regions of cracks are automatically extracted from the preprocessed image by applying Glassfire labeling algorithm to the extracted crack image, the cracks of the specific region are enlarged or reduced to $30{\times}30$ pixels and then used as input patterns to the fuzzy single layer perceptron. The experiments using concrete crack images showed that the cracks in the concrete crack images were effectively extracted and the fuzzy single layer perceptron was effective in the recognition of the extracted cracks directions.

• 한국건설순환자원학회논문집
• /
• 제2권3호
• /
• pp.233-238
• /
• 2014

합벽, 옹벽, 교량 주탑과 같이 세장한 매스콘크리트 구조물의 경우 온도균열 제어를 위해 저발열 콘크리트 배합의 적용 및 균열유발줄눈의 설치 등이 주로 적용되고 있다. 하지만 이러한 대책이 적용되어도 세장한 매스 구조물들은 내부구속에 비해 외부구속이 크기 때문에 완벽한 균열제어가 불가능하고, 특히 균열이 발생하게 되면 거의 관통을 하기 때문에 온도균열제어를 위한 특별한 관리가 필요하다. 합벽, 옹벽, 교량 주탑과 같이 세장한 매스콘크리트 구조물의 적극적인 온도균열 제어를 위하여 기존의 파이프쿨링 공법을 개선시킨 연직파이프쿨링 공법을 개발하였으며, 현장 우수조/중수조 합벽 콘크리트에 적용이 되었다. 그 결과 합벽의 중심부 최고 온도를 10도 이상 낮츨 수 있는 것으로 나타났으며, 균열은 50% 이상 감소시킬 수 있는 것으로 나타났다.