• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2000년도 정기총회 및 봄 학술발표회
• /
• pp.251-254
• /
• 2000

In this study, we investigated vertical distribution and seasonal changes of phytophlankton community in the Hae-Dong Reservoir from March 1999 to Feburary 2000. This reservoir is relativly small (surface area, 2.7 $km^2$) and is the source of drinking water supply to the eastern part of Pusan City. Samples were collected at 2 sites (1, 3, and 6 m; site 1, in front of the dam; site 2, inlet). The dominant group was Bacillriophyceae at both sites (over 63%), and other groups exhibited seasonal changes (high cyanobacterial density in summer; green algal communities in winter). Chrysophyceae and Dinophyceae were maintained lower level during the study period. Along the water depth, all classess of phytoplankton did not show distintive vertical distribution at both sites except during the blue-green algal bloom in the middle of July and late September. The phytoplankton community dynamics in the Hoe-Dong Reservoir was strongly affected by the hydrological factors such as concentrated precipitation and short retention time.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.557-562
• /
• 2004

A surface-piercing barrier model is presented for understanding morphological development in the sheltered region and investigating the main factors causing the severe accumulation. Surface-piercing structures like vertical barriers, surface docks and floating breakwaters are recently favored from the point of view of a marine scenario since they do not in general partition the natural sea. The numerical solutions are compared with experimental data on wave profiles and morphological change rates within a rectangular harbor of a constant depth protected by surface-piercing thin breakwaters as a simplified problem. Our numerical study involves several modules: 1) wave dynamics analyzed by a plane-wave approximation, 2) suspended sediment transport combined with sediment erosion-deposition model, and 3) concurrent morphological changes. Scattering waves are solved by using a plane wave method without inclusion of evanescent modes. Evanescent modes are only considered in predicting the reflection ratio against the vertical barrier and energy losses due to vortex shedding from the lower edge of plate are taken into account. A new relationship to relate the near-bed concentration to the depth-mean concentration is presented by analyzing the vertical structure of concentration. The numerical solutions were also compared with experimental data on morphological changes within a rectangular harbor of constant water depth. Through the numerical experiments, the vortex-induced flow appears to be not ignorable in predicting the morphological changes although the immersion depth of a plate is not deep.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 2006

Vertical fence has the coherent flow structure in front of the fence. In the present study, the wake change due to the flow separator in front of the vertical fence was experimentally investigated. Quantitative method was applied to study the separated shear flow field. The results show the flow separator changes the downstream shear flow and alters the curvature of separated shear layer As the freestream velocity increased, the reattachment length also increased.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.622-627
• /
• 2001

The paper presents the possibilities of a wide practical application of the modal analysis methods in dynamic testing of vertical pump. A pneumatic impact of testing vertical pumps submerged under deep water was developed and successfully applied. The problem with the enviroment is the it causes significants changes in modal parameters, compared with those in the airenviroment.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.101-113
• /
• 1993

For the purpose of interpretation of positional changes of craniofacial structures in Class III malocclusion between mixed and permanent dentition, 73 normal samples and 103 Class III samples of mixed dentition and 125 normal samples and 168 Class III samples of permanent dentition were selected. Comparative cephalometric analysis was undertaken between them respectively by mesh diagram method to evaluate the positional changes of maxilla and mandible in anteroposterior direction and vertical direction and also the inclination changes of maxillary and mandibular incisors in labio-lingual direction. The following results were obtained : 1. The antero-posterior positional changes of the maxilla and mandible were posterior direction of maxilla and anterior direction of mandible. 2. The vertical positional changes of the maxilla and mandible were superior direction of both maxilla and mandible. 3. The labio-lingual inclination changes of the maxillary and mandibular incisors were lingual direction of both maxillary and mandibular incisors.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.177-184
• /
• 2006

핸드오버는 이동통신 단말기가 기지국과 기지국 사이를 이동해도 끊김없이 데이터 송수신이 가능하도록 해주는 기술이다 핸드오버 종류는 크게 두 가지로 구분되는데 네트워크 링크의 변경 없이 라디오 링크 연결만 변경되는 것을 수평(horizontal) 핸드오버라 하고, 서로 다른 네트워크 환경을 이동하는 것을 수직(vertical) 핸드오버로 정의할 수 있다. 본 논문은 SDR(Software Defined Radio)을 기반으로 W-CDMA망과 WiBro망을 동시에 지원하는 기지국내에서의 수직 핸드오프 프로토콜을 제안하고, 제안된 프로토콜을 상태천이도 및 페트리 넷을 이용하여 검증하고 또한 NS-2 시뮬레이터를 이용하여 제안된 프로토콜의 성능을 평가하였다

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.355-360
• /
• 2005

The properties of contaminants, contaminated soil, and the elapsed time are important factors to in-situ soil remediation. Gabr et. al. (1996) derived the solution equation of contaminant concentration ratio as initial one $(C/C_0)$ with time and spatial changes in contaminated area with vertical drains. The contaminant concentration ratio $(C/C_0)$ is analyzed with time and spatial changes as varying the effective diameter, porosity, shape factor, density of contaminated soil and temperature in ground and unit weight, viscosity of contaminants by using FLUSH1 model. Results from numerical analysis indicate that the most important factor to the in-situ soil remediation using vertical drains is the effective diameter of contaminated soil. It also shows that the viscosity of contaminants, porosity of soil, shape of soil, temperature in ground, unit weight of contaminants are, in order, affected to the soil remediation but density of soil is insignificant to the soil remediation.

• 대한후두음성언어의학회지
• /
• 제10권2호
• /
• pp.102-118
• /
• 1999

In this study, the author developed a new animal model to examine morphological changes and functional recoveries after vertical hemilaryngeal transplantation in the canine. Seven vertical hemilaryngeal transplantations were carried out in the canine. After preparing the host dog removing right sided hemilarynx, hemilarynx of the donor dog was transplanted by hooking up the arteries, veins, nerves and hypopharyngeal mucosa. Especially, recurrent laryngeal nerve was anastomosed at the branch level(anterior and posterior) respectively. After 7 days, for the first evaluation of the transplantation, four out of seven dogs were considered successful. Three dogs survived more than one month, which is the critical period to evaluate the functional recovery after transplantations. After EMG examination, two dogs(#3, #5 dog) showed some functional recoveries. The five-transplanted hemilarynges were sectioned at the arytenoid cartilage region to examine the morphological changes. The results showed that the transplanted hemilarynx appeared normal as control in #5 dog. In addition, #2 dog showed fairly good condition even though died from asphyxia after 9 days out of transplantation. The other. three dogs(#3, #6, #7) showed various levels of atrophy and disappearance of the muscles and cartilages in their larynges. It can be suggested that this model could contribute an advance to preparing human laryngeal transplantation in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.315-317
• /
• 2013

To analyze vertical fire spreadability of aluminum composite panel, real scale test of aluminum composite panel and fire retardant aluminum composite panel was conducted as well as analysis of domestic code, test and domestic reaserch resulted in following conclusion. Fire spread risk assessment of aluminum Composite Panel is impossible with the current regulations (Cone Calorimeter Test). It need to changes of regulatory and combustion expanded risk assessment and regulatory changes in the test methods need to be judged. Also, there is quite a big different between the general aluminum Composite Panel and semi-non combustible of aluminum Composite Panel. However it is also deemed to be danger when present in the sidewall to the top consisting of fire spread. From now on, it is needed the study about interpretation of fire spread and sidewall of vertical fire spread analysis not only experiments for aluminum Composite Panel.