• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.161-167
• /
• 1999

There is an increasing need for the estimation of foundation piles whose depths are unknown. Especially in repair and reinforcement works or in safety inspection and assessment to the big structures whose foundations are piles, the accurate information about the depth of foundation piles is one of the most important factors. A borehole magnetic tool has been developed and tested to meet this object. The fundamental base is that there usually exist many re-bars inside the foundation structure such as piles, and these re-bars are ferromagnetic materials which cause strong induced magnetic field comparable to the earth magnetic field. It utilizes flux-gate type magnetometer which measures 3-components of the magnetic field. Taking vertical derivatives of vertical component of the measured magnetic field, we can expect the error limit of estimating the depth of the pile end less than 20 cm in favorable condition. The maximum measurable distance is about 3 m to the pile from the borehole. The field data show that borehole magnetics is one of the most accurate, fast, and reliable methods for this object so far, as long as there is no magnetic materials such as deep located steel pipe or power cables close to the foundation piles.

• 한국공간구조학회논문집
• /
• 제20권2호
• /
• pp.31-38
• /
• 2020

U-flanged truss beam is composed of u-shaped upper steel flange, lower steel plate of 8mm or more thickness, and connecting lattice bars. Upper flange and lower plate are connected by the diagonal lattice bars welded on the upper and lower sides. In this study, the details of delayed buckling of lattice members were developed through reinforcement of the end section, in order to improve structural capacity of U-flanged Truss Steel Beam. To verify the effects of these details, the simple beam experiment was conducted. The maximum capacity of all the specimens were determined by the buckling of the lattice. The vertical reinforced details of the ends with steel plates, rather than the details reinforced with steel bars, are confirmed to be a valid method for enhancing the structural capacity of the U-flanged Truss beam. In addition, U-flanged Truss Steel Beam with reinforced endings with steel plates can exhibit sufficient capacity of the lattice buckling by the formulae according to Korean Building Code (KBC, 2016) and Eurocode 3.

• 콘크리트학회지
• /
• 제3권2호
• /
• pp.115-121
• /
• 1991

보-기둥 접합부에서 보의 축방향 철근의 슬립은 정하중 및 동하중 하에서 철근 콘크리트 골조를 손상시키는 중요한 요인중 하나이다. 이 논문은 이형철근의 국부 부착-슬립 특성에 관한 콘크리트강도 및 보강철근에 대해 실행된 실험결과를 요약하였다. 실험결과로부터 부착할렬균열(bond splitting crack)이 기둥은 축방향 철근에 의해 제어되는 한 횡방향 보강철근이 국부부착거동에 직접적인 영향을 미치지 않으며 극한부착강도는 콘크리트강도의 콘크리트강도의 제곱근에 비례해 증가함을 알 수 있었다. 이를 근거로 압축강도에 따른 보강철근 내부의 콘크리트와 이형철근의 국부 부착 응력-슬립 상관관계를 나타내는 실험모델을 유도하였다.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.307-318
• /
• 2013

The purpose of this study was to analyze the kinematic variables of glide kip motion on the uneven bars through a two-dimensional cinematography. Three expert female gymnastics players were involved in the data gathering process. The followings were concluded according to the results. The arm, trunk and leg segments were fully extended throughout the kip movement. The whole body center of gravity showed the biggest changes during 66 to 87% of the kip motion. During the kip phase, the horizontal displacement of the leg was greater than the vertical displacement the leg. Glide kip motion should be done in orders of upward movement of leg, forward movement of leg, upward movement of trunk and forward movement of trunk segment. It was found that trunk segment and hip joint movements showed bigger changes than those of leg segment and shoulder joint in the glide kip motion. The largest angular velocity of hip joint was shown in the middle of the kip Phase. In conclusion, effective kip movement could be resulted when the trunk was displaced posterior-upward direction with fast hip joint extension after the leg segment was elevated upward and thrusted forward in advance.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.333-333
• /
• 2017

최근 내성천에서는 오래도록 유지되어 온 하천 경관이 식생의 활착에 의해 바뀌어 가고 있다. 이러한 변화의 양상과 원인을 분석하기 위해 한국건설기술연구원에서는 내성천 56.8 km 구간에 대한 장기 모니터링 연구를 수행하고 있다. 2012년부터 2016년까지 얻은 연속적인 항공 라이다 데이터를 이용하여 사주와 같은 하도 형상의 변화를 탐지할 수 있었다. 지난 4년간의 모니터링 경과 직선 구간에서 하중 사주의 형성이 있었으며, 기존의 사주들은 식생 활착된 표면에서의 퇴적에 의해 수직적인 퇴적이 발생하는 변화가 야기되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.5-8
• /
• 2004

In order to investigate the effect of the height of application point of lateral loads and reinforcing steel bars in walls and columns in improving the seismic behavior of confined concrete block masonry walls, an experimental research program is conducted. A total of four one-half scale specimens are tested under repeated lateral loads. Specimens are tested to failure with increasing maximum lateral drifts while a vertical axial load was applied and maintained constant. The constant vertical axial stresses applied are 0, 0.84 and 1.80MPa, while the amount of reinforcements in horizontal and vertical directions are $0\%,\;0.08\%\;and\;0.18\%$ respectively. Test results obtained for each specimen include cracking patterns, load-deflection data, and strains in reinforcement and walls in critical locations. Analysis of test data showed that above parameters generate a considerable effect on the seismic performance of confined concrete block masonry walls.

• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.419-431
• /
• 2001

본 연구에서는 단부 RC 중앙보 S조 혼합보에 대해 RC부 주근의 정착방법(플랜지 위에 직접 용접, 스터드 볼트 용접 정착) 과 이질구조부 (SRC 부)의 보강 방법에 따른 구조적 거동 분석을 고찰하였다. 이질구조부 보강방법으로는 무보강, 수직전단보강근 보강[D10-@50], 경사보강(X자형 보강), 수평보강1[웨브보강(0.3L)], 수평보강2[웨브보강(0.3L)], 수직보강[플랜지보강(0.3L)]과 같은 보강방법을 주요변수로 하여 구조적 특성을 상호 비교 분석하였다. 그 결과 보 주근의 정착방법에 따른 연성능력 및 내력 등과 같은 구조적 특성에는 큰 차이가 없었으며, 혼합구조보의 구조적 특성을 극대화시키기 위해서는 이질구조부를 수직보강한 경우와 2열 수평으로 보강한 방법이 가장 효과적인 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.95-102
• /
• 2023

본 연구에서는 다양한 래티스 단부 지점조건을 갖는 철선일체형 데크플레이트의 구조성능을 유한요소해석을 통하여 평가하였다. 해석결과, 래티스 단부에서 풋의 위치가 지점부 구조부재 위에 위치하는 경우가 그렇지 않은 경우에 비해 시스템 강성이 더 큰 것으로 나타났다. 또한 래티스 풋이 지점부에 위치하는 경우, 단부 직봉이 전체 데크플레이트 시스템의 강성과 강도에 미치는 영향은 무시할 정도로 작았다. 특히 래티스 풋의 길이가 40mm 보다 작지 않을 때에는 단부 직봉이 설치되지 않아도 무방한 것으로 평가되었다. 래티스 단부 지지형상이 데크플레이트 시스템의 최대 하중저항 성능에 미치는 영향은 크지 않은 것으로 조사되었고, 시스템의 파괴모드는 설계의도에 따라 데크플레이트 중앙에서 상부 주철근의 좌굴, 래티스 단부 좌굴, 또는 이들의 조합으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.87-94
• /
• 1994

During the construction of externally prestressed 7-span continuous segmental bridge, cracks beyond permissible limit were found at anchor zone of expansion joint segment. To eliminate this problem, tension side of diaphragm was prestressed by post-tensioning bars in vertical and horizontal direction. To investigate this remedy is acceptable, stresses of reinforcing bars and concrete surface were measured for the real structure in the field. The measurement was performed through each step of prestressing sequence during construction. Also to investigage stresses induced by live load, static load test was performed and the results was analyzed. In this paper it will be presented the procedure and results for this experimental study along with comparison with analytical study.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.59-62
• /
• 2007

The hollow RC(Reinforced concrete) pier has decrease of weight and reduced of materials compared to solid RC pier. However, the hollow RC pier shows a low ductile behavior due to brittle failure of inside concrete. To overcome this problem, the internally confined hollow reinforced concrete column has been developed. In this study, the behavior of internally confined hollow RC piers were evaluated with safety ratio, ductility, total material cost, the total weight of the pier, etc. The chosen parameters for the study are hollow ratio, thickness of internal steel tube, intervals between vertical re-bars, numbers of horizontal re-bars, and strength of concrete.