• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권6호
• /
• pp.1357-1378
• /
• 2013

Energy constraint of wireless sensor networks makes energy saving and prolonging the network lifetime become the most important goals of routing protocols. In this paper, we propose an Energy Efficient Chain-based Routing Protocol (EECRP) for wireless sensor networks to minimize energy consumption and transmission delay. EECRP organizes sensor nodes into a set of horizontal chains and a vertical chain. Chain heads are elected based on the residual energy of nodes and distance from the header of upper level. In each horizontal chain, sensor nodes transmit their data to their own chain head based on chain routing mechanism. EECRP also adopts a chain-based data transmission mechanism for sending data packets from the chain heads to the base station. The simulation results show that EECRP outperforms LEACH, PEGASIS and ECCP in terms of network lifetime, energy consumption, number of data messages received at the base station, transmission delay and especially energy${\times}$delay metric.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1998

빔 성형 안테나를 개발하기 위해서 변형된 전송선로형 안테나(MTLA)의 둘레 및 수평, 수직 소자 길이를 가변한다. 빔 틸트 특성의 검증을 위해 각각의 변형된 형상을 갖는 MTLA에 대한 수직면 방사패턴을 모먼트법으로 해석한다. 해석 결과로부터 구현될 수 있는 최대 빔 틸트는 주로 수직 소자길이에따라 결정된다는 사실올 확 인하였다. 최대 빔 틸트를 갖는 안테나를 셜게하고 입력 임피던스 및 방사 특성을 이론적으로 계산하고 실험에 의하여 확인하였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.225-232
• /
• 1998

Currently NTSC, PAL, and SECOM are widely used for TV broadcasting systems. In Korea, NTSC has been used to reduce transmission bandwidth and broadband flickers using the Interlaced scanning method. Image data in the Interlaced scanning method require De-interlacing compensation for PC-based multimedia applications. The existing compensation algorithms such as ZOI, FOI, and ELA provieds simple computations and effective image compensation while the PSNR is low and horizontal and vertical edges are hardly detected. In this paper, the ADI(Adaptive De-Interlacing) algorithm that can increase PSNR and detect horizontal and vertical edges is proposed and a hardware system is implemented using three ACTEL 1020B FPGA chips. The system consists of the algorithm part implemented using two FPGAs and the memory control part implemented using rest one. Also the system operation is investigated for real time processing.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1356-1363
• /
• 1999

In this paper, a new method for controlling the pointing device using EOG(electrooculogram) signal generated from eye movement was suggested. The basic idea of the method is to control the direction of pointer, as using the results of measuring each component of the horizontal EOG and the vertical EOG by angle of eye-gaze. As a practical example, pointing device controlling the personal computer's pointer is manufactured. The designed pointing device consists of pre-amplifier, A/D converter, serial transmission device and PC program. That is, first, the EOG is amplified by pre-amplifier. Secondly, the amplified EOG is digitized and transmitted to personal computer by PIC16C74A. Finally, the software for controlling the pointer on personal computer is programed. As the result, the measured horizontal EOG and vertical EOG by eye-gaze angle had high linearity; the correlation coefficients of the regression line were 0.998 and 0.996 respectively. And the developed pointing device is able to control the personal computer's pointer, and the average of the errors between the objective value and the observed value had 3.77% for horizontal axis and 5.85% for vertical axis. The pointing device developed in this study is able to control personal computer's pointer by subject's eye movement, that is, the user's intention. Furthermore, the algorithm of this study is applicable for many field, such as a new method remote control, a new wheelchair control and so forth.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.337-341
• /
• 2010

In this paper, an extremely low voltage operated micro corner cube retroreflector (CCR) was fabricated for free-space optical communication applications by using bulk silicon micromachining technologies. The CCR was comprised of an orthogonal vertical mirror and a horizontal actuated mirror. For low voltage operation, the horizontal actuated mirror was designed with two PZT cantilever actuators, torsional bars, hinges, and a mirror plate with a size of $400{\mu}m{\times}400{\mu}m$. In particular, the torsional bars and hinges were carefully simulated and designed to secure the flatness of the mirror plate by using a finite element method (FEM) simulator. The measured tilting angle was approximately $2^{\circ}$ at the applied voltage of 5 V. An orthogonal vertical mirror with an extremely smooth surface texture was fabricated using KOH wet etching and a double-SOI (silicon-on-insulator) wafer with a (110) silicon wafer. The fabricated orthogonal vertical mirror was comprised of four pairs of two mutually orthogonal flat mirrors with $400{\mu}m4 (length) $\times400{\mu}m$ (height) $\times30{\mu}m$ (thickness). The cross angles and surface roughness of the orthogonal vertical mirror were orthogonal, almost $90^{\circ}$ and 3.523 nm rms, respectively. The proposed CCR was completed by combining the orthogonal vertical and horizontal actuated mirrors. Data transmission and modulation at a frequency of 10 Hz was successfully demonstrated using the fabricated CCR at a distance of approximately 50 cm.

• 한국결정성장학회지
• /
• 제18권3호
• /
• pp.101-104
• /
• 2008

GaN films were grown on the vertical and horizontal reactors by the hydride vapour phase epitaxy (HVPE). The structural and optical characteristics of the GaN films were investigated depending on the reactor-type. GaN epilayers were characterized by double crystal X-ray diffraction (DC-XRD), transmission electron microscopy (TEM) and photoluminescence (PL). Surface defects of two kinds of the GaN films were revealed by the wet chemical etching method, using $H_3PO_4$ acid at $200^{\circ}C$ for 8 minutes. Hexagonal etch pits were analyzed by optical microscopy and SEM. Etch pit densities were calculated to be approximately $1.4{\times}10^7$ and $1.2{\times}10^6\;cm^{-2}$ for GaN layers grown on horizontal and vertical reactors, respectively. Those results show GaN grown in the vertical reactor having a better quality of optical properties and crystallinity than that in the horizontal reactor.

• Applied Microscopy
• /
• 제25권4호
• /
• pp.115-123
• /
• 1995

This study was carried out to observe the functional ultrastructures of photoreceptor cells in frog(Rana catesbeiana) retina using transmission electron microscope. The photoreceptor cells are divided into two types-rod and cone cells-consist of outer and inner segment. The long outer segment of rod cell contains dense stacks of membrane and formed vertical and horizontal folds. The outer segment of cone cell is small, and vertical and horizontal folds are not exist. The electron dense cytoplasm of rod cell contains compact mitochondria, Golgi complexes, and endoplasmic reticula. The inner segment of cone cell shows low electron density and contains a large lipid droplet in the upper part of inner segment. In addition, cone cell contains many mitochondria, Golgi complexes. rough endoplasmic reticula, ribosomes and numerous glycogen particles. It is believed that these ultrastructural characteristics are closely associated with photoreceptive function of photoreceptor cells in frog retina.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.177-184
• /
• 2006

핸드오버는 이동통신 단말기가 기지국과 기지국 사이를 이동해도 끊김없이 데이터 송수신이 가능하도록 해주는 기술이다 핸드오버 종류는 크게 두 가지로 구분되는데 네트워크 링크의 변경 없이 라디오 링크 연결만 변경되는 것을 수평(horizontal) 핸드오버라 하고, 서로 다른 네트워크 환경을 이동하는 것을 수직(vertical) 핸드오버로 정의할 수 있다. 본 논문은 SDR(Software Defined Radio)을 기반으로 W-CDMA망과 WiBro망을 동시에 지원하는 기지국내에서의 수직 핸드오프 프로토콜을 제안하고, 제안된 프로토콜을 상태천이도 및 페트리 넷을 이용하여 검증하고 또한 NS-2 시뮬레이터를 이용하여 제안된 프로토콜의 성능을 평가하였다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.409-412
• /
• 2001

This paper decides provision of brightness by average value of horizontal pixel, vertical pixel association. Give weight at association value calculation to improve diagonal line characteristics, and applied method to add average of vertical pixel and average of diagonal line pixel at interpolation. Therefore it improves PSNR, and it proposed algorithm that improve horizontal outline and vortical outline characteristics in big area of luminance contrast. It changed scanning line of serial scan based on proposed algorithm and designed variable image system for efficient data transmission through PCI interface circuit.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.58-61
• /
• 2000

Viewing zone shape and size perform a key role in creating viewing comfort for the viewer. The horizontal and vertical sizes of viewing zones, formed by a full color transmission type holographic screen with a stereoscopic image projection are investigated. The screens have been recorded as holograms of a narrow stripe shaped object with different width; to extend the vertical size of the viewing zone the holograms were exposed two times with the hologram shifting between exposures. The viewing zone parameters were measured as a function of the stripe width of the object and of the exit pupil size of projection optics for several holographic screens having the size of the 30 $\times$ 40 $\textrm{cm}^2$.