• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1814-1818
• /
• 2007

본 연구는 낙동강 본류 5개 유량 측정 지점에 대한 유량측정성과 검토와 더불어 개발된 수위-유량 관계 곡선식에 대한 검증 평가를 위해 객관적인 비교 분석항목을 이용하여 적절성을 평가 하였다. 이번 개발된 수위-유량관계곡선식을 이용하여 곡선식 불확실도 및 평수시, 홍수시 상하류 유량비교와 연간 유출률을 산정하였다. 그 결과, 낙동강 수계 본류의 주요 5개 대상 지점에 대해 신뢰성 있는 수위-유량관계곡선식을 개발할 수 있었다. 개발된 곡선식을 이용하여 확정된 유량자료는 양질의 수준을 갖는 것으로 평가되었다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권6호
• /
• pp.756-764
• /
• 2002

SoC 설계의 검증 비용이 전체 설계 비용의 70%를 차지한다. 이런 검증을 위한 노력과 시간을 줄이기 위해서는 SOC 설계 검증 수준을 시그널 수준 또는 사이클 수준에서 트랜잭션 수준으로 높여야 할 필요성이 있으며, 또한 그렇게 하는 것이 바람직하다. 이 논문에서는 인터페이스 신호를 모니터하고, 트랜잭션의 수행을 로그 파일에 기록하고, 트랜잭션 오류를 보고하는 트랜잭션 모니터 모듈의 생성 방법에 대해 기술한다. 인터페이스 프로토콜에 대한 기술을 입력으로 모니터 모듈을 생성한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2230-2235
• /
• 2008

As a consequence of the standardization process developing in Europe, on April 2005 the new European standard EN 13749 was issued by the European standardization body CEN. The norm EN 13749 standardizes and develops the requirements already present in UIC leaflets for test verifications and define all technical requirements for the acceptance process in order to achieve a complete satisfactory design of the bogie. The aim of the norm is to define the complete design process of new railway bogies. It includes design procedures, assessment methods, verification and manufacturing quality requirements. In this study, fatigue analysis of the bogie frame is investigated comparing different approaches between conventional methodology and simulation results based on the VPD(Virtual Product Development).

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.86-91
• /
• 2018

This paper presents about design efforts of a human-sized quadruped robot leg for high energy efficiency, and verifications. One of the representative index of the energy efficiency is the Cost of Transport (COT), but increased in the energy or work done is not calculated in COT. In this reason, the input to the output energy efficiency should be also considered as a very important term. By designing the robot with customized motor housing, small rotational inertia, and low gear ratio to reduce friction, high energy efficiency was achieved. Squatting motion of one leg was performed and simulation results were compared to the experimental results for validation. The developed 50 kg robot can lift the weight up to 200 kg, and during squatting, it showed high energy efficiency. The robot showed 71% input to output energy efficiency in positive work. Peak current during squatting only appears to be 0.3 A.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1055-1064
• /
• 2015

We demonstrate a next-generation high-capacity mobile fronthaul based on radio over fiber (RoF) technology, which links between a digital unit and a radio unit supporting two frequency assignments and $2{\times}2$ multiple input, multiple output antennas. To confirm the technical feasibility of a mobile fronthaul, we experimentally investigate its down- and uplink end-to-end performances including the optical and radio frequency (RF) signal path. Frequency-dependent performance deviations, error vector magnitude variations, overall system performance variations caused by optical to electrical conversion, and intermediate frequency to RF conversions are examined. Experimental verifications on multiple LTE uplink signals are performed for the first time. We also demonstrate several commercial mobile Internet services, YouTube video streaming, and file transfers using off-the-shelf mobile devices, through a mobile fronthaul based on RoF.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.635-642
• /
• 1997

This research focused on the development of concrete overlay and test, which was conducted at 88 Highway 105k, 2 lanes of 290 m. The field application test consists of 6 cm and 10 cm bonded concrete overlay and 25 cm unbonded concrete overlay, using the slag cement for opening lanes for traffic early. The overlay were placed in a day. The whole period of traffic closing wes 8 day and it was reopened to traffic after concrete overlay has cured for 3 day. 5 cracks were founded when the field test section was investigated after 1 month, but all these may not make significant problems to overlay because these initiated and growed at the same line of repair section. The rideability and skid resistance become much better like in the new pavement after overlay. The structural capacity against deflection was much. which were verified by FWD(Falling Weight Deflectometer). The field test section is being used in a good condition and the results of field application and pavement performance analysis are encouraging. This rehabilitation methods may be adopted in Korea after a more field performance verifications.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1122-1130
• /
• 2016

This paper presents a novel approach for achieving both a tight DC voltage regulation and a power factor control by applying the Reaching Law Sliding Mode Control (RL-SMC) and the conventional Sliding Mode Control (SMC). Applying these strategies on a matrix rectifier (MR) can achieve a unity grid side power factor when the DC load changes widely and it can provide a ripple-free output voltage that is easily affected by distortions of the three-phase ac voltage supply. Furthermore, by employing the reaching law on the SMC can solve the chatting problem of the sliding motion. Comparative Matlab simulations and experimental verifications for these strategies have been presented and discussed in this paper. The results show that by applying the SMC and RL-SMC on a MR can achieve a unity grid side power factor and a regulated ripple-free DC output.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1362-1364
• /
• 2000

This paper presents the control algorithm verification process for VCB (Vacuum Circuit Breaker) of Korean High Speed Train. In order to enhance the reliability of the control algorithm, the verification process must be performed. The verification is conducted by comparing the pre-designed control algorithm with the pre-planned scenario by simulation tools such as SDL and MSC. This verification process will be applied to the other control algorithms of various control units of Korean High Speed Train.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1270-1273
• /
• 2000

A novel zero voltage and zero current switching (ZVZCS) full bridge (FB) PWM converter is proposed. The new converter improves the drawbacks of the previously proposed ZVZCS FB PWM converters [1-5]. A simple auxiliary circuit with neither lossy components nor active switches achieves ZVZCS of the primary switches. Since the proposed converter has many advantages such as simple auxiliary circuit, high efficiency, and low voltage stress of the rectifier diode, it is very attractive for the high power applications. The principles of operation and design considerations are presented. The experimental verifications from 2.5kW prototype converter operating at 70kHz are presented.

• 전산구조공학
• /
• 제2권2호
• /
• pp.113-119
• /
• 1989

기존구조물의 안전성검토와 관련하여 구조물의 강성에 대한 현재상태를 추정하는 방법에 대하여 연구하였다. 구조계의 동특성계수들을 입력지진기록과 이에 의한 거동응답의 측정기록을 바탕으로 추정하였는데, 이때에 Extened Kalman Filtering기법을 사용하였다. 이를 위하여 상태방정식을 통상의 시간영역에서 구성하는 방법과 주파수영역에서 구성하는 방법을 제시하였다. 이 기법들의 검증은 시뮬레이션기법에 의한 방법과 함께 Shaking Table에 설치된 소형구조모형을 이용한 실험적 방법으로 수행되었다.