• Tribology and Lubricants
• /
• v.20 no.4
• /
• pp.177-182
• /
• 2004

In a turbopump cryogenic ball bearings are used to carry static and hydraulic loads, and these ball bearings must stand up to high load and speed in cryogenic circumstance. Verification of bearing performance is crucial to successful development of a turbopump. In this paper, focusing on the turbopump under developing by KARI, the performances of 203 and 207 bearings are verified through the series of tests simulating the real operating condition of turbopump.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.361-366
• /
• 2019

In developing the avionics system, a system integration laboratory (SIL) is established to verify the function and interworking of individual components. In case of individual verification of SIL's components and system integration, a SIL model that simulates the function and interworking of each equipment is developed and used. A SIL model shall be pre-verified against all data defined in the interface control document (ICD) before interworking with the actual equipment and reverified even when the ICD changes or functions change. However, if the verification of the SIL model is performed manually, the verification of the individual SIL model takes considerable time. For this reason, selective regression tests are often performed to determine a impact of SIL models on ICD changes and some functional changes. In this paper, we designed SIL model verification automation method to perform regession test by reducing verification time of SIL model and verify the usefulness of verification automation design by developing SIL model verification automation tool.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3897-3908
• /
• 2022

High-fidelity nuclear data libraries and neutronics simulation tools are essential for the development of fast reactors. The IAEA coordinated research project on "Neutronics Benchmark of CEFR Start-Up Tests" offers valuable data for the qualification of nuclear data libraries and neutronics codes. This paper focuses on the verification and validation of the CEFR start-up modelling using OpenMC Monte-Carlo code against the experimental measurements. The OpenMC simulation results agree well with the measurements in criticality, control rod worth, sodium void reactivity, temperature reactivity, subassembly swap reactivity, and reaction distribution. In feedback coefficient evaluations, an additional state method shows high consistency with lower uncertainty. Among 122 relative errors in the benchmark of the distribution of nuclear reaction, 104 errors are less than 10% and 84 errors are less than 5%. The results demonstrate the high reliability of OpenMC for its application in fast reactor simulations. In the companion paper, the influence of cross-section libraries is investigated using neutronics modelling in this paper.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.263-266
• /
• 2002

The KSR-III developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea. Not only the engine itself, but also the propellant feeding system is one of the most important component in liquid rocket vehicle. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests). With the results of these tests, we can identify the characteristics of rocket feeding system and decide the optimum setting values of feeding system for the successful flight.

• The Korean Journal of Elementary Counseling
• /
• v.6 no.1
• /
• pp.49-71
• /
• 2007

The purpose of this study was to examine the effects of a career group counseling program on the career maturity and achievement motivation of elementary school underachievers. This study targeted the fifth grader underachievers. Twenty underachievers, whose pre-test homogeneity in career maturity and achievement motivation was verified, were allocated to an experimental group and a control group by 10 underachievers each. The program was conducted for a total of 12 sessions, twice per week, and each session lasted 80 minutes. For verification of the program effects in this study, MANOVA and ANOVA were carried out for pre- and post-score tests between the groups, and repeated-MANOVA and paired t-test were peformed to look into the changes within a group by using SPSS/WIN(version 12.0) in terms of statistical analyses. The findings in this study are as follows: First, as a result of post test for the experimental and control groups, and difference verification of post and pre-tests within the experimental group, both career maturity and sub-factors of career maturity demonstrated significant differences. Second, as a result of difference verification of the pre- and post-tests within the experimental group, achievement motivation significantly improved, but there was no statistically significant difference in achievement motivation in the post-test of experimental and control groups. However, of the sub-factors of the achievement motivation, self-confidence and Interest in the long-term future significantly improved. Third, we can see that the career group counseling program provided opportunities for the underachievers to search their own character, interest, and aptitude, and broadly encounter the world of occupations. Also, we can infer that the underachieves had active and developmental attitudes towards future dreams and their current efforts. As noted above, the career group counseling program proved that it has a positive effect to the improvement of the elementary school underachievers' career maturity and achievement motivation in some variables.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1051-1056
• /
• 2014

A Fuel Feeding Unit of electric propulsion system has been developed for the small-satellite applications. The fuel feeding unit stores the xenon gas with high pressure and density as a fuel. Xenon can affect to system stability since xenon has the transient condition under the critical point which is in ambient temperature on the launch environment. The functional and structural stability on the launch environment needs verification through the ground tests. The design points and verification tests of the system were discussed and test results were described on this text. The system stability on the launch environment was verified through these verification tests.

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.41-48
• /
• 2011

The act of writing a unit test is more an act of design than of verification. It is also more an act of documentation than of verification. The act of writing a unit test closes a remarkable number of feedback loops, the least of which is the one pertaining to verification of function. Unit testing is a fundamental practice in Extreme Programming, but most non-trivial code is difficult to test in isolation. Normal unit testing is hard because It is trying to test the code from outside. On the other hand, developing unit tests with Mock Objects leads to stronger tests and to better structure of both domain and test code. In this paper, I first describe how Mock Objects are used for unit testing of federation integration. Then I describe the benefits and costs of Mock Objects when writing unit tests and code. Finally I describe a design of Mock federate for using Mock objects.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.363-379
• /
• 2013

Dynamic displacement of structures is an important index for in-service structural condition and behavior assessment, but accurate measurement of structural displacement for large-scale civil structures such as long-span bridges still remains as a challenging task. In this paper, a vision-based dynamic displacement measurement system with the use of digital image processing technology is developed, which is featured by its distinctive characteristics in non-contact, long-distance, and high-precision structural displacement measurement. The hardware of this system is mainly composed of a high-resolution industrial CCD (charge-coupled-device) digital camera and an extended-range zoom lens. Through continuously tracing and identifying a target on the structure, the structural displacement is derived through cross-correlation analysis between the predefined pattern and the captured digital images with the aid of a pattern matching algorithm. To validate the developed system, MTS tests of sinusoidal motions under different vibration frequencies and amplitudes and shaking table tests with different excitations (the El-Centro earthquake wave and a sinusoidal motion) are carried out. Additionally, in-situ verification experiments are performed to measure the mid-span vertical displacement of the suspension Tsing Ma Bridge in the operational condition and the cable-stayed Stonecutters Bridge during loading tests. The obtained results show that the developed system exhibits an excellent capability in real-time measurement of structural displacement and can serve as a good complement to the traditional sensors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.998-1005
• /
• 2017

In this paper, we first introduce a systematic verification procedure for hierarchically structured avionics system. By making use of equipment models, it can perform individual verifications of each subsystem, integrated verifications of multiple subsystems, and an integrated verification of a whole system. A multi-mode system integration laboratory is then proposed to make it possible to execute various individual or integrated verification tests at the same time. By mathematically proving that the proposed multi-mode system integration laboratory needs less verification time than the conventional verification methodology, it is expected to enhance the efficiency of the systematic verification procedure and as a result, reduce the overall verification period and costs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.207-208
• /
• 2022

Recently, with the development of digital technology, new research cases which applied new technology were increased. Also, the related equipment and services are being developed in the industry. Before new equipment is developed and released, it must go through a verification process. In the maritime industry, equipment is verified through simulation tests or environmental tests on land. However, if only the test on land is conducted, verification data in the actual operating environment might be insufficient. In this paper, considerations are described in the development of an onboard demonstration scenario for verification in the operating environment.