• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.611-617
• /
• 2004

This paper presents a simple method of rotational motion estimation and correction for roll axis stabilization of an image. The scheme first computes the rotation center by taking least squares of selected local velocity vectors, and the rotational angle is found from special subset of motion vectors. Roll motion correction is then performed by the nearest neighbor interpolation technique. To show the effectiveness of our approach, the synthetic and real images are evaluated, resulting in better performance than the previous ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.231-236
• /
• 2003

This paper presents a simple approach on the rotational motion estimation and correction for the roll stabilization of the sight system. The algorithm first computes the rotational center from the selected local velocity vectors of related pixels by least square methods. And then, rotational angle is found from the special subset of the motion vector. Finally, motion correction is performed by the nearest neighbor interpolation technique. In order to show the performance of the algorithm, the evaluation for the synthetic and real image was performed. The test results show good performance compared with previous approach.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.80-86
• /
• 1997

H:LiNbO$_{3}$ optical modulator buffered by parylene layer, which has a merits in the bandwidth, power consumption and fabrication as compared with conventional SiO$_{2}$ buffered optical modulator, is proposed and analyzed. The dependences of velocity matching condition, charcteristics impedance, and driving voltage on dielectric constants, thickness of buffer layer, and electrode configurations are demonstrated with finite element calculation. And we performed the physical and chemical test of parylene buffer layer deposited on LiNbO$_{3}$ and under Au electrodes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.555-559
• /
• 2001

A new stereoscopic PIV is developed using two CCD cameras, stereoscopic photogrammetry, and a 3D-PTV principle. The wake of a circular cylinder is measured by the developed stereoscopic PIV technique. The B mode vortical structure of the wake over the Reynolds number 300 is clearly seen by the developed technique. The arrangement of the two cameras is based on angular position. The calibration of cameras and the pair-matching of the three-dimensional velocity vectors are based on 3D-PTV technique.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.680-687
• /
• 2007

The paper presents a numerical simulation of flow of a turbulent boundary layer, representing a typical wind environment and matching a series of wind tunnel observations. The simulations are carried out at a Reynolds number of 20,000, based on the velocity U at a pseudo-height h, and large enough that the flow be effectively Reynolds number independent. Some wall models are proposed for the LES(Large Eddy Simulation) of the turbulent boundary layer over a rough surface. The Jenson number, $J=h/z_0$, based on the roughness length $z_0$, is 600 to match the wind tunnel data. The computational mesh is uniform with a spacing of h/32, as this aids rapid convergence of the multigrid solver, and the governing equations are discretised using second order finite differences within a parallel multiblock environment. The results presented include the comparison between wind tunnel measurements and LES computations of the turbulent boundary layer over rough surface.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.255-258
• /
• 2006

With the increasing availability of high-resolution satellite imagery, the demand for ortho-rectified products will also be growing. High-resolution of the imagery (up to 1m) the desired accuracy of the ortho-rectification is more sensitive to a number of factors. including satellite position, velocity, internal sensor error (specifically, misalignment. lens distortion, etc.). sensor modeling, relief displacement and matching error, etc. The main objective of this study is to analysis the accuracy of high resolution satellite data using simulation data.

• 한국가시화정보학회지
• /
• 제1권1호
• /
• pp.92-97
• /
• 2003

A new Stereoscopic PTV was developed using two CCD cameras, stereoscopic photogrammetry based on a 3D-PTV principle. Virtual images were produced for the benchmark test of the constructed Stereoscopic PTV technique. The arrangement of the two cameras was based on angular position. The calibration of cameras and the pair-matching of the three-dimensional velocity vectors were based on the Genetic Algorithm based 3D-PTV technique. The constructed Stereoscopic PTV technique was tested on the standard images of the impinged jet proposed by VSJ. The results obtained by the constructed system showed good agreements with the original data.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.14-21
• /
• 2007

This paper proposes SDINS(strapdown inertial navigation system) transfer alignment method for vertical launcher using an adaptive filter in the ship. First, the velocity and attitude matching transfer alignment method is designed to align SDINS for vertical launcher. Second, the adaptive filter is employed to estimate measurement noise variance in real time using the residual of measurements. Because it is difficult to decide measurement noise variance when noise properties of the ship SDINS are changed. To verify its performance, it is compared with the EKF(Extended Kalman filter) using uncorrect measurement variance. The monte carlo simulation results show that proposed method is more effective in estimating attitude angle than EKF.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.789-796
• /
• 2009

Microdroplet deposition in a micro-groove is studied numerically. The droplet shape is determined by a level-set method which is improved by incorporating a sharp-interface modeling technique for accurately enforcing the matching conditions at the liquid-gas interface and the no-slip and contact angle conditions at an immersed solid surface. The computations are carried out to investigate the droplet behavior derived by the interfacial characteristics between the liquid-gas-solid phases. The effects of contact angle, impact velocity and groove geometry on droplet deposition in a micro-groove are quantified.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.539-544
• /
• 2009

An estimation of 3D velocity field including occluded parts without maxing tracer to the fluid had not only never been proposed but also impossible by the conventional computer vision algorithm. In this paper, we propose a new method of three dimensional optical flow of the fluid based on physical model, where some boundary conditions are given from a priori knowledge of the flow configuration. Optical flow is obtained by minimizing the mean square errors of a basic constraint and the matching error terms with visual data using Euler equations. Here, Navier-Stokes motion equations and the differences between occluded data and observable data are employed as the basic constrains. we verify the effectiveness of our proposed method by applying our algorithm to simulated data with partly artificially deleted and recovering the lacking data. Next, applying our method to the fluid of observable surface data and the knowledge of boundary conditions, we demonstrate that 3D optical flow are obtained by proposed algorithm.