• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.662-669
• /
• 1994

In the combustion system, the optimum spray conditions reduce the pollutant emission of exhaust gas and enhance the fuel efficiency. The spray characteristics-the drop size, the drop velocity, the number density and the mass flux, become increasingly important in the design of combustor and in testifying numerical simulation of spray flow in the combustor. The purposes of this study are to clarify the spray characteristics of twin-fluid nozzle and to offer the data for combustor design and the numerical simulation of a spray flow. Spatial drop diameter was measured by immersion sampling method. The mean diameter, size distribution and uniformity of drop were analyzed with variations of air/liquid mass flow ratio. The results show that the SMD increases with the liquid supply flow rate and decreases with the air supply velocity. The radial distribution of SMD shows the larger drops can diffuse farther to the boundary of spray. And the drop size range is found to be wider close to the spray boundary where the maximum SMD locates.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.317-336
• /
• 2011

A time domain finite element based method is employed to analyze wave radiation by multiple cylinders. The nonlinear free surface and body surface boundary conditions are satisfied based on the perturbation method up to the second order. The first- and second-order velocity potential problems at each time step are solved through a finite element method (FEM). The matrix equation of the FEM is solved through an iteration and the initial solution is obtained from the result at the previous time step. The three-dimensional (3D) mesh required is generated based on a two-dimensional (2D) hybrid mesh on a horizontal plane and its extension in the vertical direction. The hybrid mesh is generated by combining an unstructured grid away from cylinders and two structured grids near the cylinder and the artificial boundary, respectively. The fluid velocity on the free surface and the cylinder surface are calculated by using a differential method. Results for various configurations including two-cylinder and four-cylinder cases are provided to show the mutual influence due to cylinders on the first and second waves and forces.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.199-204
• /
• 2014

2성분 응고계에서 다공성 mush 층에서의 조성 대류는 생성되는 제품의 질에 영향을 준다. 본 연구에서는 일정한 속도로 응고되는 mush 층을 고려하였다. 선형 안정성 이론을 사용하여 mush 층에 대한 교란방정식을 유도하였고, 기본상태 온도장과 mush 층에서 기공률의 분포를 수치해법으로 조사하였다. 과열량이 클 때 mush 층의 두께는 열경계층의 두께에 비해 상대적으로 작았다. 과열량이 감소함에 따라 mush 층의 두께를 기준으로 한 Rayleigh 수는 증가하였고, mush 층은 조성 대류에 대해 안정해졌다. mush 층의 윗면에 등온조건을 적용한 경우보다 온도 및 열속의 연속조건을 액체-mush 계면에 적용한 경우에 임계 Rayleigh 수가 더 작게 얻어졌다.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.895-910
• /
• 2013

The reflood test data from the rod bundle heat transfer (RBHT) test facility showed that the grids in the upper portion of the rod bundle could become wet well before the arrival of the quench front and that the sizes of liquid droplets downstream of a wet grid could not be predicted by the droplet breakup models for a dry grid. To investigate the water droplet generation from a wet grid spacer, a viscous linear temporal instability model of the water sheet issuing from the trailing edge of the grid with the surrounding steam up-flow is developed in this study. The Orr-Sommerfeld equations along with appropriate boundary conditions for the flow are solved using Chebyshev series expansions and the Tau-Galerkin projection method. The effects of several physical parameters on the water sheet oscillation are studied by determining the variation of the temporal growth rate with the wavenumber. It is found that a larger relative steam velocity to water velocity has a tendency to destabilize the water sheet with increased dynamic pressure. On the other hand, a larger ratio of steam boundary layer to the half water sheet thickness has a stabilizing effect on the water sheet oscillation. Droplet diameters downstream of the spacer grid predicted by the present model are found to compare reasonably well with the data obtained at the RBHT test facility as well as with other data recently reported in the literature.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.245-250
• /
• 2002

This report describes the effects of following flaws due to ship's propeller on the fish farm structure when the ship's propeller is operated in full power. This study is applied an incompressible newtonian fluid theory, which is governed the Navier-Stokes equation. For the numerical solution, Neumann equation are applied as the boundary conditions. The result shows that the flow velocity near the fish farm is 1.0 m/sec. The actual measurement carries out by using propeller type velocimeter in order to measure the velocity of following flows and currents around the fish farm area. The result shows that the maximum velocity near the fish farm structure is 1.2 m/sec in depth of 1.5 m. This velocity is used for calculation of external force on the fish farm structure. The results of structural strength of the fish farm structures show that the actual maximum bending moment and bending stress are less than the damage strength of material. So the fish farm structure is not affected by the following flows and currents of ship's propeller.

• 물과 미래
• /
• 제8권2호
• /
• pp.56-60
• /
• 1975

Traditional descriptions of water movement in soils and of calculations of infiltration rates neglect the air movement and its compressibility. The movement of two fluids in the bounded layered porous medium is treated analytically and computer simulations are conducted for given boundary conditions and initial saturation profiles. The movement of a given saturation across the interface between the different soil layers is theoretically developed by considering the conservation of mass. It is shown that the existence of the interface affects the infiltration rate when the average total velocity is greater than zero. The transition from one layer to another layer cause a change in the capillary drive and consequently influences the infiltration rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.625-630
• /
• 2000

In this paper, the governing equation and the boundary conditions of deploying rods are derived by using Hamilton's principle. The Galerkin method using the comparison function of the instantaneous natural modes is adopted by which the governing equation is discretized. Based on the discretized equations, the time integration analysis is performed and the longitudinal vibrations for the deploying and the retrieving velocity are analyzed.

• 소음진동
• /
• 제10권1호
• /
• pp.138-143
• /
• 2000

Longitudinal vibration of an axially moving material is investigated by using the assumed modes method. To circumvent a difficulty in choosing the comparison functions which satisfy the boundary conditions, the assumed modes method is adopted by which equations of motion are discretized. Based on the discretized equations, the complex eigenvalue problem is solved and then the effects of the translating velocity on the natural frequencies and modes are analyzed.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.731-739
• /
• 1987

본 연구에서는 K.J.Riu의 연구를 확장하여, 상향유동 영역에서 수직면으로부 터 경사각이 60˚이하인 경사등온면이 저온의 물속에 잠겨있을때 일어나는 다중정상상 태 영역을 밝혀내고, 이 영역에서 경사각이 열전달, 온도분포, 속도분포, 부력분포 및 Nusselt수에 미치는 영향을 구명하였다.또한 해석방법은 이제까지 발표된 연구결과 와 비교검토하기 위하여 기존 논문에서와 같이 상사해석을 사용하였다.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.41-50
• /
• 1993

본 논문은 2차원 수중익 주위의 유동해석을 위하여 포텐셜을 기저로한 여러가지 패널법을 비교 한다. 각 패널에서의 특이함수의 세기는 일정하거나 선형으로 변한다고 가정하고, Neumann 및 Dirichlet의 경계조건과 함께 혼합경계조건(Robin경계조건)을 적용하여 정식화를 한후, 각 방법의 정확도를 평가 하였다. 여러가지 2차원 단면에 대한 압력분포 및 양력을 계산하고, 해석해와 비교하였다. 날카로운 뒷날과 큰 캠버값을 갖는 날개의 경우에 특히 예민하다고 알려진 날개 뒷날 부근에서의 국소오차에 대하여 집중적인 연구를 수행하였다. 비교해석 결과, 혼합 경계조건을 사용하는 정식화 방법이 가장 정확성이 높고, 수렴속도도 우수함을 밝혔다.