• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.51-56
• /
• 2013

Even if transmissions through normal channel between ubiquitous devices and terminal readers are encrypted, any extra sources of information retrieved from encrypting module can be exploited to figure out the key parameters, so called side channel attack. Since side channel attacks are based on statistical methods, making side channel signal weak or complex is the proper solution to prevent the attack. Among many countermeasures, shielding the electromagnetic signal and adding noise to the EM signal were examined by applying different thicknesses of thin films of ferroelectric (BTO) and conductors (copper and gold). As a test vehicle, chip antenna was utilized to see the change in radiation characteristics: return loss and gain. As a result, the ferroelectric BTO showed no recognizable effect on both shielding and adding noise. Cu thin film showed increasing shielding effect with thickness. Nanometer Au exhibited possibility in adding noise by widening of bandwidth and red shifting of resonating frequencies.

• 한국멀티미디어학회논문지
• /
• 제21권12호
• /
• pp.1448-1458
• /
• 2018

Vehicular Ad-Hoc Networks (VANETs) have become one of the active areas of research, standardization, and development because they have tremendous potentials to improve vehicle and road safety, traffic efficiency, and convenience as well as comfort to both drivers and passengers. However, message trustfulness is a challenge because the propagation of false message by malicious vehicles induces unreliable and ineffectiveness of VANETs, Therefore, we need a reliable reputation method to ensure message trustfulness. In this paper, we consider a vulnerability against the Sybil attack of the previous reputation systems based on blockchain and suggest a new reputation system which resists against Sybil attack on the previous system. We propose an initial authentication process as a countermeasure against a Sybil attack and provide a reliable reputation with a cooperative message delivery to cope with message omission. In addition, we use Homomorphic Commitment to protect the privacy breaches in VANETs environment.

• International Journal of Computer Science & Network Security
• /
• 제24권8호
• /
• pp.139-144
• /
• 2024

VANETs have become one of the most attractive research areas in the world of wireless networks in recent years. Indeed, vehicular networks have become capable of optimizing road traffic, which significantly reduces the number of accidents through notifications exchanged between nearby vehicles. The routing function based on the opportunistic algorithm is a critical part of the vehicle's communication system and will therefore be an ideal target for attacks that could aim to prevent alert messages from reaching their destination, and thus endanger human lives. The black hole attack is a major threat to the security of VANETs. The main idea of this paper focuses on the analysis of this type of attack in VANETs using Discrete-Time Markov Chains (DTMC). and deduce at the end the effect of the number of malicious nodes on the delivery rate in the network.

• 한국CDE학회논문집
• /
• 제18권3호
• /
• pp.155-166
• /
• 2013

We present recent human-vehicle interaction (HVI) research conducted in the area of defense and military application. Research topics discussed in this paper include: training simulation for overland navigation tasks; expertise effects in overland navigation performance and scan patterns; pilot's perception and confidence on an overland navigation task; effects of UAV (Unmanned Aerial Vehicle) supervisory control on F-18 formation flight performance in a simulator environment; autonomy balancing in a manned-unmanned teaming (MUT) swarm attack, enabling visual detection of IED (Improvised Explosive Device) indicators through Perceptual Learning Assessment and Training; usability test on DaViTo (Data Visualization Tool); and modeling peripheral vision for moving target search and detection. Diverse and leading HVI study in the defense domain suggests future research direction in other HVI emerging areas such as automotive industry and aviation domain.

• 한국추진공학회지
• /
• 제13권3호
• /
• pp.41-49
• /
• 2009

본 논문은 공기흡입식 추진기관의 고체 로켓 부스터 분리에 관한 수학적 모델링과 시뮬레이션 기법을 기술하였다. 비행체 및 부스터는 하나의 다물체(multi-body)로 고려하였고 부스터는 단지 비행체의 축 방향으로 움직이는 것으로 가정하였다. 비행체 및 부스터의 동적 운동은 Kane 방법에 의해 모델링 되었다. 다양한 부스터 위치에 따라 전체 시스템에 작용하는 공력은 DATCOM 소프트웨어를 사용하여 산출되었으며 부스터 분리 유효 작용면에 작용하는 내부 분리 압력은 일반적인 기체역학 및 Taylor-MacColl 관계식에 의해 산출되었다. 수치적 해석은 Mathworks사의 Matlab이 사용되었다. 해석 결과에 의하면 부스터 분리 동안 마하수 및 받음각 변화 등은 크지 않는 것으로 나타났으며, 실제 시험 장치를 이용한 부스터 분리 시험이 진행될 경우 자세 각 변화, 흡입 유동 특성 등은 무시할 만한 수치임을 확인할 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.188-200
• /
• 2018

This paper proposes a single control strategy to solve the problem of trans-media vehicle difficult control. The proposed control strategy is just to control the vehicle's air navigation, but not to control the underwater navigation. The hydrodynamic model of a vehicle when entering water obliquely at low speed has been founded to analyze the motion characteristics. Two methods have been used to simulate the vehicle entering water in the same condition: numerical simulation method and theoretical model solving method. And the results of the two methods can validate the hydrodynamic model founded in this paper. The entering water motion in the conditions of different velocity, different angle, and different attack angle has been simulated by this hydrodynamic model and the simulation has been analyzed. And the change rule of the vehicle's gestures and position when entering water has been obtained by analysis. This entering water rule will guide the follow-up of a series of research, such as the underwater navigation, the exiting water process and so on.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.1-7
• /
• 2015

This research is to develop a possible process to apply k-means clustering to an efficient vehicle routing process under time varying vehicle moving speeds. Time varying vehicle moving speeds are easy to find in metropolitan area. There is a big difference between the moving time requirements of two specific delivery points. Less delivery times are necessary if a delivery vehicle moves after or before rush hours. Various vehicle moving speeds make the efficient vehicle route search process extremely difficult to find even for near optimum routes due to the changes of required time between delivery points. Delivery area division is designed to simplify this complicated VRPs due to time various vehicle speeds. Certain divided area can be grouped into few adjacent divisions to assume that no vehicle speed change in each division. The vehicle speeds moving between two delivery points within this adjacent division can be assumed to be same. This indicates that it is possible to search optimum routes based upon the distance between two points as regular traveling salesman problems. This makes the complicated search process simple to attack since few local optimum routes can be found and then connects them to make a complete route. A possible method to divide area using k-means clustering is suggested and detailed examples are given with explanations in this paper. It is clear that the results obtained using the suggested process are more reasonable than other methods. The suggested area division process can be used to generate better area division promising improved vehicle route generations.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.20-27
• /
• 2001

A variable configuration tracked vehicle(VCTV) is developed to reduce turning energy and improve climbing ability for stairs. This mechanism has four track T-type frames. By changing the driving direction, each track T-type frame rotates to minimize the contact area with ground. It also has better performance than other VCTV in energy consumption of turning. Futhermore this mechanism is more stable than other VCTV on the rough terrain. When climbing stairs, each track T-type frame rotates to obtain a front attack angle and keep stability on steep stairs. The design parameters of components of track T-type frames are optimized to enhance the performance of climbing stairs. Performance indices include a stable angle, a climbing ability, a height of the vertical obstacle. In case that the overall length of the mechanism is 0.2m, it is required that the radius of the wheels should be 5mm and the length track contacted with he ground should be 0.09m to climb higher and steeper stairs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.789-792
• /
• 1999

Reinforced concrete structures covered creek for road vehicle located in urban areas have been experiencing corrosion of concrete and reinforcing steel caused by $H_2S$ gases generated by anaerobic bacterial. H2S gases react with oxygen and water to form sulfuric acid ($H_2SO_4$). This acid chemically attacks concrete, and sulfate ions penetrate into the concrete, causing rebar corrosion. In this work, to determine the conditions of RC culvert boxes which were constructed in the 1970s, various tests were conducted, including carbonation depth, compressive strength, half-cell potential measurements, and XRD analyses. Results indicated that the concrete deterioration was caused by sulfate attack and rebar corrosion. This paper discusses the evaluation on the durability of reinforced concrete structures covered creek for road vehicle.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.11-24
• /
• 2006

The Lithographic ink is composed of pigment, vehicle and additives. In especially, the vehicle is the most important element and consist of vegetable oils, mineral oils and resins. Varnishes have to resist certain forms of chemical and physical attack during ink manufacturing process and printing process So this varnish cooking is very important. In this paper, effects of cooking conditions of varnish using phenolic modified rosin ester on physical properties of the vehicle were studied. The varnish cooked according to temperature and time were compared in order of average molecular weight by the GPC method. and the rheological properties were found by rotational rheometer. And the emulsion behavior were compared by high speed emulsification tester which were set on 1200 rpm and $40^{\circ}C$ temperature (Novomatics Lithotronic). We displayed viscosity against tack(Inkometer Thwing-Albert M-106) by diagram.