• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.333-348
• /
• 2018

An analytical method is developed for analysing the contact buckling response of infinitely long, thin corrugated plates and flat plates restrained by a Winkler tensionless foundation and subjected to linearly varying in-plane loadings, where the corrugated plates are modelled as orthotropic plates and the flat plates are modelled as isotropic plates. The critical step in the presented method is the explicit expression for the lateral buckling mode function, which is derived through using the energy method. Simply supported and clamped edges conditions on the unloaded edges are considered in this study. The acquired lateral deflection function is applied to the governing buckling equations to eliminate the lateral variable. Considering the boundary conditions and continuity conditions at the border line between the contact and non-contact zones, the buckling coefficients and the corresponding buckling modes are found. The analytical solution to the buckling coefficients is also expressed through a fitted approximate formula in terms of foundation stiffness, which is verified through previous studies and finite element (FE) method.

• 대한정형도수물리치료학회지
• /
• 제12권1호
• /
• pp.44-50
• /
• 2006

The purpose of this study is to assess the radiographic effects of normal person with contact laterally wedged insoles with strapping of varying elevations. Eight person who were randomized into group according to their birth dates and wedge elevation, participants wore contact laterally wedged insoles with strapping with elevation of 9, 15, 21mm. Standing radiographs were used to analyze the femorotibial angle for each subject, The result of repeated measures ANOVA's reveled that laterally wedged insoles with strapping of varying elevations produced significantly the femorotibial angle. The degree of change in femorotibial angle with the insole with strapping was effected by the tilt of the lateral wedge(P<0.05). We suggest that these results may be beneficial for manufacturing foot orthotic devices, such as wedged insoles, to control medial and later compartment forces in the knee varus-valgus deformity.

• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1147-1156
• /
• 2011

CLECDiS 는 면적변화형 정전용량 센서의 단점을 극복하고 나노미터 수준의 분해능으로 밀리미터 이상의 큰 변위를 측정하도록 개발된 접촉식 변위센서이다. 그러나 접촉구동 특성으로 인하여 표면평탄도와 마찰에 의해 작은 접촉상태의 변화에도 출력 신호는 크게 왜곡될 수 있어 실제 이를 활용하기 위해서는 전극간 접촉상태를 안정적으로 유지하는 것이 중요하다. 이에 본 연구에서는 전극간 접촉상태의 변화에 따른 신호의 왜곡 특성을 실제 출력 신호와 비교하여 분석하고, 접촉면 내 압력 분포와 센서의 운동 오차 측정을 통해 접촉상태의 변화를 파악하였다. 이를 통하여 센서의 운동 오차와 마찰력의 영향을 최소화하기 위한 접촉 유지 기구를 설계하고 제작하였으며 이를 이용한 구동실험을 통해 보다 안정적인 센서 출력 신호를 획득하였다.

• 폴리머
• /
• 제36권3호
• /
• pp.338-343
• /
• 2012

콘텍트렌즈용 하이드로젤의 계면 특성의 이해를 위해 단백질 흡착 현상을 열역학을 바탕으로 연구하였다. 다른 습윤성을 갖는 $1{\times}1mm^2$ 크기의 하이드로젤을 알부민(bovine serum albumin, BSA)용액에 1시간 동안 침지시킨 후 남아있는 BSA 용액의 농도를 Bradford assay로 정량하였다. 모든 하이드로젤로의 단백질 흡착량은 단백질 농도가 증가함에 따라 계면 흡착량이 증가하며 Langmuir 곡선의 형태를 보였다. 또한 계면과 용액내의 단백질 농도비($P$), 계산된 흡착 Gibbs free energy는 하이드로젤 재료의 친수성도가 증가함에 따라 증가하였다. 표면에너지와 단백질 흡착량 상관관계를 이해하여 콘택트렌즈 재질로의 단백질 흡착현상의 물리화학적 해석이 가능함을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.139-142
• /
• 1996

This paper presents a method of controlling contact force for deburring tasks. The cope with the nonlinearities and time-varying properties of the robot and the environment, a neural network control theory is applied to design the contact force control system. We show that the contact force between the hand and the contacting surface can be controlled by adjusting the command velocity of a robot hand, which is accomplished by the modeling of a robot and the environment as Mass-Spring-Damper system. Simulation results are shown.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.335-341
• /
• 2009

Elastohydrodynamic lubrication (EHL) analysis shows that film thickness is very flat in the contact area and pressure distribution is somehow similar to that of Hertzian contact pressure except the outlet region with pressure spike. These typical patterns of EHL film thickness and pressure are the cases under the steady contact conditions of applied loads and speeds. However, many engineering contacts are rather under the conditions of varying loads and contact speeds, and therefore the predictions for endurance life and performance of machine elements with steady EHL analysis are not suitable in many occasions. This study shows the differences in film thickness formation and pressure distribution between steady and transient contact conditions in several contact cases.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.71-78
• /
• 1997

Wear is affected by numerous factors-contact load, sliding velocity and distance, friction coefficient, material properties and environmental conditions. Among these wear factors, surface hardness is one of very important factors to determine wear. But surface hardness is varied by work hardening during repeated sliding contact. In this reason wear rate is increased or decreased with varying surface hardness, and transition of wear mechanism is happened. In this study, the surface hardening by accumulating residual stress was analyzed by considering the repeated sliding Hertzian contact model. The results showed that surface hardness was increased with increasing contact load, friction coefficient and contact number. And the depth of hardening layer, plastic layer and elastic layer depended upon contact load and number, but they didn't depend upon friction coefficient. The predicted surface hardness was about 1.5-1.8 times as hard as the material.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.841-842
• /
• 2011

• 한국안광학회지
• /
• 제19권2호
• /
• pp.145-151
• /
• 2014

목적: 개시제와 교차결합제의 농도에 따른 소프트콘택트렌즈의 재질을 변화시켜서 재질변화에 대한 물리적 특성 및 약물의 용출량 및 속도를 비교하였다. 방법: HEMA에 개시제인 AIBN과 교차결합제인 EGDMA의 농도을 변화시켜서 콘택트렌즈를 제작하였다. 항균물질인 노플록사신(norfloxacin)은 고분자 중합 시 0.1% 농도로 단량체와 함께 혼합하였다. 재질변화에 따른 물리적 성질 변화를 확인하기 위해 약물용출 농도, 함수율, 굴절률, 단백질 흡착량 등에 대한 실험을 통하여 비교하였으며, 통계분석을 통해 유의성을 확인하였다. 결과: 개시제의 농도을 변화 시킨 콘택트렌즈는 함수율의 변화가 거의 없으며, 굴절률의 값에도 별 변화가 없었다. 교차결합제 농도이 증가하면 함수율이 낮아지고 굴절률이 높아졌다. 약물용출의 농도를 살펴보면 개시제의 변화에 의해서는 많은 변화를 보이지 않았으며, 함수율이 높을수록 용출되는 농도가 증가하였다. 단백질 흡착양은 개시제에 의한 변화는 거의 없었으며 함수율이 낮을수록 흡착되는 양이 증가하였다. 결론: 개시제의 농도에 대한 변화는 특성 변화에 영향력이 거의 없었으며, 교차결합제 농도에 따라서는 많은 변화를 보였다. 교차결합제의 농도가 증가할수록 함수율은 감소하며 굴절률은 증가하였다. 또한 함수율의 증가에 따라 약물이 많이 용출되었으며 단백질의 흡착량은 감소되었다.

• 대한물리의학회지
• /
• 제1권1호
• /
• pp.37-47
• /
• 2006

Purpose : The purpose is to assess the effects of muscle activity of normal person with contact laterally wedged insoles with strapping of varying elevations of 9, 15, 21mm. Methods : The subjects were adult males and women who had not experienced any knee injury. They were asked to performed from isometric contraction exerciese in four postures using lateral wedged. The normalized EMG activity levels(%MVC) of the vastus lateralis, vastus medialis, tibialis anterior, soleus for the four postures of the lower extremities were compared using one way repeted measures ANOVA. Results : Comparison of EMG amplitudes across all postures revealed no significant differences among all muscles(P>0.05). Conclusion : Further studies of the effect of wedged insole angle on knee varus torque in patients with medial-lateral knee osteoarthritis are needed.