• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.427-441
• /
• 2005

In order to choose proper dispersion model and emission factors suitable in Korea in evaluating the effect of pollutants emitted by the vehicles in highway on nearby area, various road dispersion models and vehicle emission factors were reviewed. With theoretical inter-comparisons of the exiting models for line source, CALINE 3 and CALINE 4 models which were suggested by US EPA were selected as the road dispersion models for further evaluation with the measurement. The emission factors suggested by Korean Ministry of Environment was turned out to be appropriate since the classification of vehicle kinds was simple and easy to apply in Korea. The comparisons of predicted concentrations by CALINE 3 and 4 models with the measurements in flat, fill and bridge road types showed that CO and PM-10 were in good agreements with experiments and the differences between CALINE 3 and 4 models are negligible. The model concentrations of $NO_2$ by CALINE 4 were also in good agreement with the measurement but those by CALINE 3 were over-predicted. The discrepancies in CALINE 3 model were due to rapid decay reaction of $NO_2$ near the highway, which was not included in CALINE 3 model. For the road type with one & two side cutting grounds, the similar patterns as the flat & fill road type for CO, PM10, & $NO_2$ were observed but the number of data for comparison in these cases were not enough to draw the conclusion. These results lead to the conclusion that CALINE4 model is proper in road environmental impact assessment near the highway in flat, fill and bridge road types.

• Journal of Forest and Environmental Science
• /
• v.28 no.2
• /
• pp.84-96
• /
• 2012

A special type of indigenous knowledge on plants utilization and farming system was explored by the Garo tribe community in the North-East region of Bangladesh, which correspond to the severe dependence on homestead forest. Results show that the Garo are totally dependent on the natural resources and that the extent of their dependency is faithfully reflected in their ethno-botanical knowledge. Dependencies that the study addressed focused on various aspects of food, fruit, energy, timber and health care on plants products. Garo tribe community in Bangladesh followed agrosilvipastoral system in their homesteads. They have indigenous hunting procedure to trap the animal in the forest. A total of 9 foods, 15 fruits, 12 energy-producing and 11 timber species was found and recorded that the Garo used in their daily life. Moreover, Garo used 23 medicinal plants species and have vast indigenous knowledge about using herbal medicine in daily health care practices. The Garo women do mostly the household activities, managing homestead forest and helping agricultural field where men perform all hard working activities like ploughing, cutting trees, digging the soil, preparation of horticultural and agricultural land, hunting, etc. The overall quality of life of the Garo could be considerably upgraded if ethno-botanical issues and their own indigenous knowledge will complement with scientific knowledge. The findings of the study conclude that the conservation of the indigenous knowledge of the Garo tribe related to plants utilization can also be turned to good account in forest conservation and is an important tool in this tribal area of Bangladesh.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.79-93
• /
• 2013

In the Korean literature, records of systematic gold thread manufacturing such as gold foil(金 箔匠), gold foil bonded with fabrics(付金匠), gold foil bonded with paper materials(金箋紙匠), refining gold(鍊金匠), cutting gold(裁金匠), and making gold thread(絲金匠) can be easily found. We can infer from these literatures that the Korean people used to make gold threads. However, is not existent the gold thread making technique. Thus, a research was done using 67 pieces of gold thread artifacts used in textiles craft of Korea, China and Japan. The purpose of this research was to identify the characteristics of the Korean gold thread by studying the artifacts' form classification, gold foil, glue and the base. First, gold thread is divided into flat gold thread and wrapped gold thread. Wrapped gold thread was made in more various methods such as with a paper on the flat gold thread, metal thread and wrapped gold thread with gold foil on top. Compared to the flat gold thread, wrapped gold thread uses a thread that has a thinner and wider. Through this analysis, even making of the base of the gold threads was different according to the type. Secondly, we looked into the characteristics of materials according to form structure of the gold thread. After analysis of experiment results, we could know that to attach Korean gold thread, glue and the mixture of materials such as Red soil(朱土) was also added. The kinds of the base of gold threads were identified as paper, leather and intestines. Among those materials, for paper, Korea's Dakji, China's Sangpiji(桑皮紙) and Jukji(竹紙) and Japan's Anpiji(雁皮紙) seemed to have all been used, so because of the difference among countries, we can prove that Korea has also produced gold thread. By looking at the research, the base of gold threads and making features hugely vary according to the area.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.445-452
• /
• 2011

The object of this experiment was to investigate the food habits of Korean native goats fed with various roughage sources. The experimental trials were conducted at Unbong Animal Genetic Resources Station in 2008. The experimental roughages include five sources and 25 species in all; grasses and legumes: 5 species (mixed grasses, orchardgrass, tall fescue, alfalfa, white clover), native grasses and weeds: 5 species (mixed native grasses, Miscanthus sinensis Anderss, Arundinella hirta (Thunb.) Tanaka, Barnyard grass, short awn, forage crops and straw: 5 species (barley + hairy vetch, wheat + hairy vetch, rye silage, barley silage, baled rice straw), browse and fallen leaves: 5 species (Mixed browse, Oriental white oak, Quercus serrta Thunb., Oriental cherry fallen leaves, Japanese chestnut fallen leaves), and imported hay and straw: 5 species(timothy hay, tall fescue straw, annual ryegrass straw, klinegrass hay, alfalfa hay). Ten Korean native goats were selected which had nearly the same body weight (average $24{\pm}2.8$ kg). The chemical composition and dry matter digestibility of each roughage source and species were significantly different at the sampling area, plant species, growth stages and cutting period (p<0.05). Among all the 25 species of roughages, the favorite intake species order by Korean native goat was observed like this: Quercus aliena, Querancas serrta Thunb and Mixed browse, which was a lower intake compared to other domestic herbivores. The Korean native goats ate more roughages which had low fibrous contents, but high dry matter digestibility. The Korean native goats ate more roughages which had low fibrous contents, but high dry matter digestibility. On the other hand, compared to each roughage source, total intake amount by Korean native goats was showed as browse and fallen leaves (33.1%) among trials roughage sources. Based on these results, the food habit of Korean native goats seems to be closer to the browser.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.437-444
• /
• 2011

The object of this experiment was to investigate the food habits of sika deer fed with various roughage sources. The experimental trials were conducted at Unbong Animal Genetic Resources Station in 2008. The experimental roughages include five sources and 25 species in all; grasses and legumes: 5 species (mixed grasses, orchardgrass, tall fescue, alfalfa, white clover), native grasses and weeds: 5 species (mixed native grasses, Miscanthus sinensis Anderss, Arundinella hirta (Thunb.) Tanaka, barnyard grass, short awn, forage crops (hay, silages and straw): 5 species (barley + hairy vetch, Wheat + hairy vetch, rye silage, barley silage, baled rice straw), browse and fallen leaves: 5 species (mixed browse, oriental white oak, Quercus serrta Thunb., oriental cherry fallen leaves, Japanese chestnut fallen leaves), and imported hays and straws: 5 species (timothy hay, tall fescue straw, annual ryegrass straw, klinegrass hay, alfalfa hay). Five sika deer were used as experimental animals and the averaged body weight was 95+5.4kg. The chemical composition and dry matter digestibility of each roughage source and species were significantly different at the sampling area, plant species, growth stages and cutting period(p<0.05). The sika deer ate more roughages which had low fibrous contents, but high dry matter digestibility. Among all the 25 species of roughages, the favorite intake roughage sources ranking by sika deer was observed like this: browse and fallen leaves (32.2%), grass and legumes (27.0%), native grasses and weeds (22.0%), imported hays (12.9%) and forages crops (5.5%) respectively. Although, the sika deer ate more browse leaves, but ate more roughage which had low fibrous contents (NDF and ADF), but high drymatter digestibility. On the other hand, compared to each roughage source, total intake amount by sika deer was showed as browse and fallen leaves (32.2%). Based on the result, the food habit of sika deer seems to be closer to the typical browser.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.246-254
• /
• 2016

Nowadays, 3 dimentional (3D) printing, especially Direct Metal Laser Sintering (DMLS) system is used in dentistry. DMLS system has recently been introduced for fabrication metal framework for metal ceramic crowns to overcome the disadvantages of the casting method and computer aided design/computer aided manufacturing (CAD/CAM) milling system. DMLS system uses a high-temperature laser beam to selectively heat a substructure metal powder based on the CAD data with the framework design. A thin layer of the beamed area becomes fused, and the metal framework is completed by laminating these thin layers. Utilizing DMLS system to fabricate fixed prostheses is expected to achieve free-from shaping without mold and limitations from cutting tools, fabricate prostheses with complex geometry, prevent distortion and fabrication defects that inherent to conventional fabrication methods. The purpose of this case report is to demonstrate various fixed prostheses such as long span fixed prostheses, post to achieve satisfactory results in functional and esthetic aspects.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.72-84
• /
• 2008

Since enactment of the Baekdu-Mountain Range protection law in Dec. 31st 2003, great interest arose in recovery of the natural environment in the Baekdu-Mountain Range. Since the Baekdu-Mountain Range has formed boundaries between different regions and it is the mountain that crosses our country from East to West, there are so many roads that penetrate this area. Slopes made by the construction of roads have poor foundation for the growth of vegetation and it takes a long period to restore only with natural restoration force. For this reason, various methods of revegetation to restore the damages are implemented but until now, revegetation of domestic soil cutting slopes are mainly covered by foreign import grasses to stabilize and cover grounds early. As we depended upon foreign import grasses for slopes revegetation, the landscape did not match in harmony with surrounding vegetation and therefore, we could see that these foreign grasses are withered in 2~3 years after the revegetation works and slopes become barren again. However, currently, there are no applicable standards for designs of green hill, desirable revegetation methods for the hill areas, roads and recovery models. Therefore, in this study, we investigated the status of revegetation plants and revegetation methods for the hill areas of the Baekdu-Mountain Range (azimuth, degree of tilt, and tilted places). Based on this, we attempted to find the desirable recovery models for the hill areas of the Baekdu-Mountain Range.

• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2011

Introduction: The aim of this paper is to discuss the mechanical and geometric features of Nickel-titanium (NiTi) rotary files and its clinical effects. NiTi rotary files have been introduced to the markets with their own geometries and claims that they have better ability for the root canal shaping than their competitors. The contents of this paper include the (possible) interrelationship between the geometries of NiTi file (eg. tip, taper, helical angle, etc) and clinical performance of the files as follows; - Fracture modes of NiTi rotary files - Non-cutting guiding tip and glide path - Taper and clinical effects - Cross-sectional area and clinical effects - Heat treatments and surface characteristics - Screw-in effect and preservation of root dentin integrity - Designs for reducing screw-in effect Conclusions: Based on the reviewed contents, clinicians may have an advice to use various brands of NiTi rotary instruments regarding their advantages which would fit for clinical situation.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2016

Current indoor intrusion detection and location tracking methods have the weakness in seamless operations in tracking the objective because the object must possess a communicating device and the limitation of the single cell size (approximate $100cm{\times}100cm$) exits. Also, the utilization of CCTV technologies show the shortcomings in tracking when the object disappear the area where the CCTV is not installed or illumination is not enough for capturing the scene (e.g. where the context-awarded system is not installed or low illumination presents). Therefore, in this paper we present an improved in-door tracking system based on sensor networks. Such system is built on a simulated scenario and enables us to detect and extend the area of surveillance as well as actively responding the emergency situation. Through simulated studies, we have demonstrated that the proposed system is capable of supplementing the shortcomings of signal cutting, and of estimating the location of the moving object. We expect the study will improve the better analysis of the intruder behavior, the more effective prevention and flexible response to various emergency situations.