• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.1013-1022
• /
• 2006

본질적으로 두 개의 I형 거더를 가진 사장교는 공기역학적으로 불리한 특성을 가지고 있음에도 불구하고 경제적으로 유리하기 때문에 최근 우리나라에서 많이 건설되고 있다. 본 논문에서는 두 개의 I형 거더를 가지는 사장교의 실제 조건 하에서의 공기역학적 특성을 평가하기 위하여 영각, 난류강도, 감쇠비를 변화시켜가면서 단면모형실험을 수행하였다. 비틀림 강성이 다른 두 개의 상부 단면 형식이 시공단계 및 완공 후에 대하여 각각 조사되었고 교량의 공기역학적 특성을 향상시키기 위하여 3가지 형식의 페어링이 고려되었다. 연구결과, 전통적인 등류에서의 단면모형실험은 다소 비관적으로 공기역학적 거동을 평가하고 있으며 교량의 바람에 의한 응답은 난류강도와 구조감쇠비에 따라 현저하게 변화하는 것을 확인하였다. 본 연구에서 제시된 페어링은 와류진동 및 버페팅 진동을 감소시켰으며 또한, 플러터의 발생속도도 증가시켰다. 본 연구결과는 두 개의 I형 거더를 가지는 사장교의 내풍설계를 위한 많은 정보를 제공할 수 있을 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.27-28
• /
• 2008

We have studied an organic layer-thickness dependent electrical and optical properties of organic light-emitting diodes in a device structure of ITO/TPD/$Alq_3$/LiF/Al. While a hole-transport layer thickness of TPD was varied from 35 to 65nm, an emissive layer thickness of $Alq_3$ was varied from 50 to 100nm. A ratio of those two layers was kept to about 2:3. Variation of the layer thickness changes a traverse time of injected carriers across the organic layer, so that it may affect on the chance of probability of exciton formation. Current-voltage-luminance characteristics of the devices show that there are typical rectifying behaviors, and the luminance reaches about $30,000cd/m^2$. Thickness-dependent current efficiency shows that there is a gradual increase of the efficiency as the total layer thickness increases. The efficiency becomes saturated to be about 10cd/A when the total thickness is above 140nm. They show that emission was from the $Alq_3$ layer, because the peak wavelength is about 525nm. View angle-dependent emission spectra show that the emission intensity decreases as the angle increases.

• 한국수자원학회논문집
• /
• 제36권3호
• /
• pp.455-464
• /
• 2003

본 연구에서는 지하 빗물저류시설 설치에 따른 유출저감 효과를 분석하기 위하여 실험실내 모형 빗물저류장치를 설치하여 강우강도 변화, 표층의 피복상태 변화, 표면경사 변화에 따른 유출량 변화 실험을 실시하였다. 실험결과 대상하천인 승기천의 토양조건하에서 강우강도가 40mm/hr-100mm/hr일 때 총유출량 감소는 42.3-52.9%로 나타났으며, 지하 빗물저류시설을 설치하는 경우 총유출량과 첨두유량의 감소를 가져올 수 있을 것으로 판단된다. 경사변화에 따른 총유출량의 변화는 완만한 경사에서는 매우 크게 나타났으나 3%이상의 급경사에서 침투에 의한 저류량에 변화가 적고, 이는 산지와 같은 급경사지역에 빗물저류시설을 설치하는 경우 장기간의 홍수에 대하여 상당한 효과를 나타내는 것으로 나타났다. 따라서, 본 시스템은 하천이나 산지의 급경사에도 큰 결과를 기대할 수 있다.

• 물과 미래
• /
• 제26권1호
• /
• pp.81-91
• /
• 1993

본 논문에서, 실제 유역에서의 이동강우에 의한 유출현상을 분포형 모델을 이용하여 모의하였다. 실제유역으로 미국 Idaho주의 Macks Creek 실험유역이 선정되었으며, 사용된 이동강우로 1965년 8월23일 15시 30분에서 17시 30분까지 약 2시간에 걸쳐 진행되었던 강우를 채택하였다. 이 강우는 강우 지속 기간동안 강우강도의 값이 상당히 변화하며, 또한 강우 자체가 지역내 한지점으로부터 다른 지점으로 점차적으로 이동되어가는 전형적인 이동강우의 특성을 갖추었다. 또한 이 유역내 지표면을 이루고 있는 토양의 특성, 식물의 피복정도, 지표면의 경사, 하상경사등의 유출 지배 인자들은 각 지점마다 그 값이 다른 전형적 공간분포 형태를 갖추고 있다. 분포형 모델로는 본 논문의 전편에서 개발된 모델을 사용하였는데, 이 모델은 유역내 유출현상을 지표면 흐름과 하천망 흐름으로 나누어 모의한다. 즉, 2차우너의 유한요소 모델을 이용하여 지표면 유출을 모의한후 모의된 지표면의 유출량을 1차원의 유한차분 모델의 입력자료로하여 하천망의 유출을 모의한다. 분포형 모델을 적용하여 유역의 하류지점에서 모의된 유출량과 관측된 유출량은 상당히 일치하고 있고 또한 하천망내 각각의 합류점에서도 상.하류간에 질량의 관계가 잘 보존되고 있었으며, 제안된 분포형 모델을 이요하여 유역내 이동강우가 성공적으로 모의되어다.

• Journal of Radiation Protection and Research
• /
• 제36권1호
• /
• pp.16-23
• /
• 2011

보다 정확한 우라늄 농축도 분석은 핵물질 관리를 위하여 중요하다. 본 연구에서는 감마선을 이용한 우라늄 농축도 분석에서 시료와 검출기 사이에 차폐체가 있는 경우와 측정시간 변화에 따른 분석결과에 대한 정확성 평가 및 오차분석을 수행하였다. 우라늄 농축도를 분석하기 위하여 FRAM (Fixed energy Response function Analysis with Multiple efficiencies)을 이용하였다. FRAM에 의한 분석결과의 정확성은 화학 분석 결과와의 비교를 통해 평가되었다. 연구결과 선원과 검출기사이에 차폐체가 존재할 경우 차폐체의 두께변화에 따른 감마선의 세기는 지수함수 형태로 감소하며 감마선에너지 피이크의 반치폭 (FWHM : Full Width at Half Maximum)은 차폐체의 두께에 영향을 거의 받지 않는 것을 보였다. 따라서 시료와 검출기 사이에 차폐체가 있는 경우의 우라늄 농축도 분석에서 FRAM을 이용한 감마선분광 분석은 유용하게 활용될 수 있다. 본 연구 결과는 차폐체 안에 우라늄이 있는 경우 핵물질 분석에 기여할 수 있을 것이 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.124-124
• /
• 2011

This study investigated the interaction of varied plasma power with ultralow-k toluene-tetraethoxysilane (TEOS) hybrid plasma polymer thin films, as well as changing electrical and mechanical properties. The hybrid thin films were deposited on silicon(100) substrates by plasma enhanced chemical vapor deposition (PECVD) system. Toluene and tetraethoxysilane were utilized as organic and inorganic precursors. In order to compare the electrical and the mechanical properties, we grew the hybrid thin films under various conditions such as rf power of plasma, bubbling ratio of TEOS to toluene, and post annealing temperature. The hybrid plasma polymer thin films were characterized by Fourier transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM), nanoindenter, I-V curves, and capacitance. Also, the hybrid thin films were analyzed by using ellipsometry. The refractive indices varied with the RF power, the bubbling ratio of TEOS to toluene, and the annealing temperature. To analyze their trends of electrical and mechanical properties, the thin films were grown under conditions of various rf powers. The IR spectra showed them to have completely different chemical functionalities from the liquid toluene and TEOS precursors. Also, The SiO peak intensity increased with increasing TEOS bubbling ratio, and the -OH and the CO peak intensities decreased with increasing annealing temperature. The AFM images showed changing of surface roughness that depended on different deposition rf powers. An nanoindenter was used to measure the hardness and Young' modulus and showed that both these values increased as the deposition RF power increased; these values also changed with the bubbling ratio of TEOS to toluene and with the annealing temperature. From the field emission scanning electron microscopy (FE-SEM) results, the thickness of the thin films was determined before and after the annealing, with the thickness shrinkage (%) being measured by using SEM cross-sectional images.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.413-414
• /
• 2008

We have studied an organic layer thickness dependent optical properties and microcavity effects for top-emission organic light-emitting diodes. Manufactured top emission device, structure is Al(100nm)ITPD(xnm)/$Alq_3$(ynm)/LiF(0.5nm)/Al(23nm). While a thickness of hole-transport layer of TPD was varied from 35 to 65nm, an emissive layer thickness of $Alq_3$ was varied from 50 to 100nm for two devices. A ratio of those two layers was kept to about 2:3. Variation of the layer thickness changes a traverse time of injected carriers across the organic layer, so that it may affect on the chance of probability of exciton formation. View-angle dependent emission spectra were measured for the optical measurements. Top-emission devices show that the emission peak wavelength shifts to longer wavelength as the organic layer thickness increases. For instance, it shifts from 490 to 555nm in the thickness range that we used. View-angle dependent emission spectra show that the emission intensity decreases as the view-angle increases. The organic layer thickness-dependent emission spectra show that the full width at half maximum decreases as the organic layer thickness increases. Top emission devices show that the full width at half maximum changes from 90 to 35nm as the organic layer thickness increases. In top-emission device, the microcavity effect is more vivid as the organic layer thickness increases.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.50-58
• /
• 2011

To utilize wind resources effectively around buildings in urban area, the magnitudes of wind velocity and turbulence intensity are important, which means the need of the information about the relationship between the magnitude of wind velocity and that of fluctuating wind velocity. In the paper, wind-tunnel experiments were performed to provide the information about Characteristic of Wind flow around buildings with the spanwise distance and the side ratio of buildings as variables. For a single building with the side ratios of one and two, the average velocity ratio was 1.4 and the velocity standard deviation ratio ranged from 1.4 to 2.6 at the height of 0.02m at the corner of the windward side, in which flow separation occurred. For twin buildings with the side ratios of one and two, the velocity ratio ranged from 2 to 2.5 as the spanwise distance varied at the height of 0.02m, and the velocity standard deviation ratio varied near 1.25. For twin buildings with the side ratios of one and two, the maximum velocity ratio was 1.75 at the height of 0.6m, and the maximum velocity standard deviation ratio was 2.1. It was also found from the results of CFD analysis and wind-tunnel experiments that for twin buildings with the side ratios of one and two, the difference between the velocity ratio of CFD analysis and that of wind-tunnel experiments at streamwise distances was near 0.75.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권2호
• /
• pp.23-26
• /
• 2007

The influence of water partial pressure in Metal-organic Deposition (MOD) method was investigated on the texture and the morphology of $YBa_2Cu_3O_{7-x}$ (YBCO) films grown on the buffered metal tapes. The water partial pressure was varied from 4.2% up to 10.0% with the other process variables, such as annealing temperature and oxygen partial pressure, kept constant. In this work, the fluorine-free Y & Cu precursor solution added with Sm was synthesized and coated by the continuous slot-die coating & calcination step. The next annealing step of the YBCO films was done by the reel-to-reel method with the gas flowed vertically down. From the x-ray diffraction analysis, the un-reacted phase like $BaF_2$ peak was found at the water partial pressure of 4.2%, but $BaF_2$ peak intensity is much reduced as the water partial pressure is increased. However, the higher water partial pressure of about 10% in this experiment leads to the poor crystallinity of YBCO films. The morphologies of the YBCO films were not different from each other when the water partial pressure was varied in this work. The maximum critical current density of 3.8MA/$cm^2$ was obtained at the water partial pressure of 6.2% with the annealing temperature of 780$^{\circ}C$ and oxygen partial pressure of 500ppm.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.132-133
• /
• 2003

The marine dinoflagellate genus Alexandrium comprise PSP producing A. acatenella, A. angustitabuzatum, A. catenella, A. fundyense, A. minutum, A. ostenfezdii, A. tamiyavanichii and A. tamarense. In monitoring toxic Alexandrium, rapid and exact species identification is one of the significant prerequisite work, however we have suffered confusion of species definition in Alexandrium. To surmount this problem, we chose DNA probing, which has long been used as an alternative for conventional identification methods, primarily relying on morphological approaches using microscope in microbial field. Oligonucleotide DNA probes targeting rRNA or rDNA have been commonly used in diverse studies to detect and enumerate cells concerned as a culture-indetendent powerful tool. Despite of the massive literature on the HAB species containing Alexandrium, application of DNA probing for species identification and detection has been limited to a few documents. DNA probes of toxic A. tamarense, A. catenella and A. tamiyavanichii, and non-toxic A. affine, A. fraterculus, A. insuetum and A. pseudogonyaulax were designed from LSU rDNA D1-D2, and applied to whole cell-FISH. Each DNA probes reacted only the targeted Alexandrium cells with very high species-specificity within Alexandrium. The probes could detect each targeted cells obtained from the natural sea water samples without cross-reactivity. Labeling intensity varied in the growth stage, this showed that the contents of probe-targeted cellular rRNA decreased with reduced growth rate. Double probe TAMID2S1 achieved approximately two times higher fluorescent intensity than that with single probe TAMID2. This double probe did not cross-react with any kinds of microorganisms in the natural sea waters. Therefore we can say that in whole-cell FISH procedure this double DNA probe successfully labeled targeted A. tamiyavanichii without cross-reaction with congeners and diverse natural bio-communities.